Kid Trax Toys KT1010TG, KT1014TG Owner's Manual
Kid Trax Quad
©2010 Pacic Cycle Inc.
4902 Hammersley Rd.
Madison, WI 53711
United States of America
Phone: (877) 741-6154
www.kidtraxtoys.com
Styles and Colors may vary
Made in China
The owner’s manual contains assembly, use and maintenance
instructions. The Kid Trax Quad must be assembled by an adult who
has read and understands the instructions in this manual. Keep the
packaging away from children and dispose all packaging before use.
Model Number: KT1010TG / KT1014TG
Owner’s Manual
Keep instructions for future reference.
For purchasing the Kid Trax Quad. With the Kid Trax Quad your
child will have fun and enjoyment for years to come. Features on
the toy include a rechargeable battery and xed speed.
Please call us at Kid Trax Toys Consumer Relations at
877-741-6154 with comments or questions.
ii
Thank You
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
User Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Attach the Handlebar/Steering Column . . . . . . . . . 4
Attach the Front Axle Assembly . . . . . . . . . . . . . . 5
Attaching the Front Wheels . . . . . . . . . . . . . . . . . . 6
Inserting the Rear Axle . . . . . . . . . . . . . . . . . . . . . 7
Attaching the Gear Box . . . . . . . . . . . . . . . . . . . . 7
Attaching the Drive Wheel . . . . . . . . . . . . . . . . . . 8
Attaching the Left Rear Wheel . . . . . . . . . . . . . . . 9
Connecting the Wires . . . . . . . . . . . . . . . . . . . . . .10
Attaching the Seat. . . . . . . . . . . . . . . . . . . . . . . . .11
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . .13
Battery Replacement and Disposal. . . . . . . . . . . .15
Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . .18
Services, Repairs and Parts . . . . . . . . . . . . . . . . . 20
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Contents
WARNING!
The following safety hazards may result in serious injury or death to the
user of the Quad:
• This product contains small parts that are for adult assembly only.
Keep small children away when assembling. Remove and dispose
of all protective material and poly bags before assembly. Be sure to
remove all packaging materials and parts from underneath the car
body.
• Riding the vehicle without a helmet. Riders must always wear a tted
helmet that complies with U.S. Consumer Product Safety
Commission (CPSC) Standard CFR 1183.
• Battery posts, terminals and related accessories contain lead and
lead compounds (acids) chemicals known to the state of California to
cause cancer, reproductive harm, and are toxic and corrosive. Never
open the battery.
• Body parts such as hands, legs, hair and clothing can get caught in
moving parts. Never place a body part near a moving part or wear
loose clothing while using the vehicle. Always wear shoes when
using the vehicle.
• Using the vehicle near streets, motor vehicles, drop-offs such as:
steps, water (swimming pools) or other bodies of water, sloped
surfaces, hills, wet areas, ammable vapors, in alleys, at night or in
the dark could result in an unexpected accident. Always use the
vehicle in a safe, secure environment with continuous adult
supervision.
• Using the vehicle in unsafe conditions such as snow, rain, loose dirt,
mud, sand or ne gravel may result in unexpected action such as tip
over and skidding.
• Using the vehicle in an unsafe manner. Examples include but are not
limited to:
a. Pulling the vehicle with another vehicle or similar device
b. Allowing more than one rider
c. Pushing the user from the back
d. Traveling at an unsafe speed
Always use common sense and safe practices when using the vehicle.
This product contains or emits chemicals known to the state of
California to cause cancer or birth defects or other reproductive harm.
1
Safety
User Requirements
The suitable age range for a child using the Quad is 18 months +. The
maximum weight of the child is 33 lbs (15kg).
Before using the Quad the child must understand the vehicle controls
and safety issues. They must also demonstrate the capability to handle
the vehicle and operate its controls. It is the responsibility of the adult
to educate the child, determine if they are t to operate the vehicle, and
supervise the vehicle’s use.
Here are basic safe riding rules you should read aloud to your child and
anyone who may ride the Quad:
• An adult must always supervise a child that is riding the Quad.
• Children under 18 months old should not be allowed to use
the vehicle.
• Always sit in the seat when using the vehicle.
• Keep your hands, hair and clothes away from moving parts.
Always wear shoes when riding the vehicle.
• Only one rider is allowed at a time.
• Don’t drive the vehicle into loose dirt, mud, sand or ne gravel.
Driving the vehicle into loose dirt, mud, sand, or ne gravel may
damage the chain mechanism inside the vehicle.
• Only drive on level ground. Don’t go near water, drop-offs or up
and down steep slopes.
• Do not drive the vehicle indoors or around obstructions.
• Do not drive the vehicle on streets or near cars.
2
Parts
Close
Open
Quad body (1)
seat (1)
charger (1)
spanner (1)
6V 4AH battery (1)
handlebar/steering
column (1)
rear axle (1)
wheels (4)
hubcaps (4)
wheel
covers (4)
locknuts (4)
small
washers (4)
drive wheel
wear pad (1)
3
Assembly
Attaching the Front Wheels
1. Remove the locknut and the small washer from
the axle. Leave the large washer on the axle.
2. Line up the posts on the hubcap with the holes
in the wheel. Place and press the hubcap onto
the wheel.
3. Place the wheel on the axle.
4. Place the small washer onto the front axle.
5. Place the locknut onto the end of the rear axle
and rmly tighten with the spanner.
6. Line up the tabs on the wheel cover with the
slots in the hubcap. Press the wheel cover onto
the hubcap.
7. Repeat steps 1-6 for the remaining front axle.
Note: All the wheels
are identical and can be
placed on either axle.
4
spanner
hubcap
wheel
locknut
wheel
cover
front axle large washer
small
washer
Inserting the Rear Axle
1. Remove the locknut and small washer from the right hand side of the
rear axle. Leave the large washers on the axle.
2. Orient the rear axle so the gear box end is on the side where the gear
box will be located.
3. Slide the rear axle through the holes in the rear of the Quad body.
4. Place the drive wheel wear pad on the right rear axle and press it
onto the gear box.
Note: The left side
of the axle is the
end that has the
wielded spacer.
3
4
5
rear axle
drive wheel
wear pad
large washer
Loading...