Kiddicare Urban 3 Wheeler Instruction Manual

IMPORTANT

Read these instructions carefully before use and keep

them for future reference. Your child’s safety may be

affected if you do not follow these instructions.

Instruction Leaflet

Urban 3 Wheeler

This vehicle is intended for children from birth up to a maximum weight of 15kgs.

Complies with BS EN 1888 : 2003

Customer Care: [e-mail]

To open the jogger

1. Unclip the folding latch. Lift up on the stroller handle
with both hands until the stroller frame is erect and
locked in the open position.

Rear wheel assembly

2. Push the rear wheel housing onto the rear legs until
the spring clips come through the holes. Place the
wheel onto the axle and secure with washer (A) and the
cap (B) and the hub cap (C). Push the wheel hub cap
into place. (Push the widest part of the washer onto the
axle first. Push the cap on to the washer. This may
require quite a bit of pressure. Make sure the cap is
sitting straight and not at an angle. Now push the hub
cap into place).

To operate the brakes

3. Step down on the linked brake bar as shown to
engage the brakes. (A) Lift up on the link brake bar to
unlock the brakes. (B)

Front wheel assembly

4. Push the front wheel onto the front leg until it clicks
into position. The front wheel can be either set in a
swivel or fixed position.

5. Push the tab down to select a swivel front wheel. To
choose a fixed front wheel, centralise it first and lift the
tab up.

WARNING Ensure that all the locking devices are
engaged before use.

To attach the bumper bar

6. Push the end of the bar into the frame until it clicks
into position. To remove it, push the buttons on the
underside of the bar and pull out.

Fig. 2

Fig. 5

B

A

Fig. 3

A

A B C

Fig. 6

Fig. 7

Fig. 4

Fig. 1