stride and ride
Important: Please read carefully and
keep for future reference. Your child’s
safety may be affected if you do not
follow these instructions.
stroller board
2
parts
x1
x1
x1
x1 x2
x2
x1 x1
C
F
A B
D
G H
E
PRESS
PRESS
3
assembly
insert washers
insert wheels
2
click
click
1
A
B
E
4
loosen knobs
insert support arms
3
4
assembly
D
C
5
f itting guide
Possible fixing locations for umbrella type strollers
* Also see “fitting tips” pages 12-15
connector location
connector alignment
2
1
6
f itting guide
avoid rubbing against moving parts
3
7
2
f itting guide
connectors
4
x2
x2
3
x2
1
8
f itting guide
attaching the connectors
5
x2
x2
1
2
9
adjust arms
6
f itting guide
10
f itting guide
attach the arms
7
x2
x2
x2
1
2
3
11
f itting guide
tighten knobs
8
12
f itting tips
close to pushchair
away from pushchair (recommended)
2
1
+More stride space for tall adults
-Less space for larger/taller children
+More space for larger/taller children
-Less stride space for tall adults
13
classic frame
modern frame and 3-in-1 pushchairs
3
4
f itting tips
WARNING: Many modern
pushchairs have brake cables
running down the tubing. Ensure
the brakes still work after you
have attached the connectors.
14
tandem pushchairs
large style umbrella strollers
5
6
f itting tips
15
3-wheeler,/double/twin pushchairs
7
f itting tips
1. Does your pushchair still fold with the connector on the legs?
2. If the connector is high up on the leg then the board will be nearer to the pushchair. This will give
you more leg room if you are taller and have a longer stride.
3. If you fit the connector low down [RECOMMENDED] then board will be further away from the
pushchair, so you may find it easier to reach the brakes and may be more suitable for taller children.
NOTE: If you cannot find a place to fit the connector while the pushchair is in the folded position, or
opening/closing action is obstructed, then you may need to remove the connectors before you can
fold the pushchair.
fold the pushchair first
8
16
after use
attach storage strap
2
remove the board
1
x2
H
17
store safely
3
after use
18
19
care
Kiddicare
Club Way,
Cygnet Park,
Hampton,
Peterborough,
Cambridgeshire PE7 8JA
Customer Care: hello@kiddicare.com
Safety
WARNINGS:
• Suitableforchildrenfrom2yearsoldupto20kg.
• Never let children play with the stroller board.
• Never leave your child unattended.
• This product is only intended for one passenger.
• When going up or down steps, kerbs, stairs or escalators, ensure the child is not on the stroller
board.
• Always keep your hands on the pushchair when your child is standing on the platform.
• Make sure your child is standing with both feet on the board before pushing the pushchair.
• Check all connectors and locking mechanisms are tightened prior to use.
• Do not use the stroller board if any parts are broken or missing or worn. When not in use, store
away from children’s access.
• Always disconnect your stroller board before folding your pushchair. In some pushchair models
you may need to disassemble the connectors as well.
• Ensure the stroller board does not prevent normal operation of the stroller.
• Avoid attaching the connectors over brake cables or near to moving parts - you may damage
your stroller or prevent it from working safely.
Complies with the general Product Safety Regulations
2005 (BSEN 1888:2012 AND PD CEN/TR 13387:2004).
Maintenance&Cleaning
Regularly inspect all locking devices and connectors before using the stroller board.
If you have any difficulty with the wheels, ensure that dirt is not the cause.
Use a spray lubricant (e.g. WD40) for the wheels.
Sponge clean with warm water and mild detergent.
Always allow to dry or use a cloth to dry before using or storing.
Loading...