mooch
Infant Carrier
Group 0+ / 0-13kg
IMPORTANT:
KEEP FOR FUTURE REFERENCE,
READ CAREFULLY.
Instruction Manual
2
parts
A B C D
A
B
C
D
in use
3
click
1
Using the harness
1
2
in use
4
2
Using the harness
in use
5
3
Tighten the harness
in use
6
4
Loosen the harness
1
2
2
in use
7
5
Check the harness fit
Always adjust the harness to fit your child correctly for their
comfort and safety; a poorly fitted harness can be dangerous.
in use
8
6
Advisory information
in use
9
7
Belt routing
in use
10
8
Fitting checklist
in use
11
9
Adjusting the carrying handle
1
2
click
in use
12
10
Fitting the sun canopy
click
in use
13
11
Fitting the sun canopy
x2
in use
14
12
Fitting the sun canopy
x2
in use
15
13
Removing the seat fabric
in use
16
FE
B
A
SE
Mi
mas
Gr0
+ / 0-13
k
g
mooch
Infant Carrier
Group 0+ / 0-13kg
IMPORTANT:
KEEP FOR FUTURE REFERENCE,
READ CAREFULLY.
14
Storage of instruction manual
18
safety
• The seat can be used in the front (if allowed by current legislation) or on the rear
seats. Folding seats must always be locked in place. This device must be used only
on approved vehicles fitted with 3 point seat belts/static/retractable, approved to
ECE/UN regulation or equivalent standard.
• DONOT install the child safety seat facing the rear on a front seat fitted with an
airbag. DANGEROFDEATHORSERIOUSINJURY.
• Model approved for the 0+ group, i.e. for a child weighing less than 13 kg (up to
about 12 months of age).
• The child restraint system (0+ group) must be used with the back facing forwards.
• Please read these instructions carefully and make yourself familiar with the product
before using it.
• Always keep the instructions for future reference; there is a storage compartment
specifically provided on the child seat.
• Never leave your child unattended.
• This child safety seat is effective only if the fitting instructions are followed.
• For your own safety and that of your child, always place your child in the safety seat
no matter how short the journey you are making.
• Even a slight accident can turn your child into a projectile.
• Always keep the child safety seat fitted even when the child is not being carried.
• The manufacturer’s liability extends only to what is contained in European
Regulation (R44). This approval does not preclude due care and observation of the
highway code.
• Never change the construction or materials of the seat or belt without consulting
the manufacturer.
• Never place heavy objects on the rear parcel shelf to avoid them being flung
forward in case of an accident.
• The user must always ensure that luggage and other objects which could injure the
occupant of the seat in case of an accident are firmly fastened down.
• The temperature inside a vehicle can be very high, especially after it has stood in
the sun for a long time. In such conditions, you are strongly advised to cover the
child’s seat with a cloth or other suitable item to prevent the harness fastenings, in
particular the metal parts, from becoming hot and burning the child.
• A new seat MUST be fitted after an accident.
• Always check that no part of the safety seat or harness is trapped under a seat or in
the door of the vehicle.
• Do not use the child safety seat without its cover.
• Do not replace the seat cover with one not recommended by the manufacturer
because the cover is an integral part of the restraint performance.
19
safety
• Kiddicare products have been carefully designed and tested to ensure the
complete safety and comfort of your baby. Use only accessories sold or approved
by Kiddicare. The use of other accessories may be dangerous.
• After having put your baby in the seat, ensure that the belt is tightened securely to
your child’s body by pulling the strap. Ensure that the strap is not twisted.
• Ensure that the 3 point safety belt holding the restraint to the vehicle is tight.
• Adjust the position of the vehicle’s seats so as not to interfere with the correct fitting
and effectiveness of the child safety seat.
• Push the front passenger seat forward to install the child safety seat in the rear of
the vehicle.
• Push the front passenger seat backwards when installing in the front of the vehicle
to use the length of the front seat belt to maximum effectiveness.
• NOTICE:This is a “Universal” child restraint. It is approved to Regulation No. 44, 04
series of amendments, for general use in vehicles and it will fit most, but not all, car
seats. A correct fit is likely if the vehicle manufacturer has declared in the vehicle
handbook that the vehicle is capable of accepting a “Universal” child restraint for
this age group.
This child restraint has been classified as “Universal” under more stringent
conditions than those which applied to earlier designs which do not carry this
notice.
If in doubt, consult either the child restraint manufacturer or the retailer.
• NOTICE:Only suitable if the approved vehicles are fitted with 3 point retractor
safety belts, approved to UN/ECE Regulation No. 16 or other equivalent standards.
care
kiddicare
Customer Care: hello@kiddicare.com
Kiddicare,
Club Way,
Cygnet Park,
Hampton,
Peterborough,
Cambridgeshire PE7 8JA
Maintenance
• Store this child seat in a safe place when not in use.
• DO NOT place heavy objects on top of it.
• Always store the child seat in a dry environment.
• DO NOT store the child seat near a direct heat source such as a radiator.
Covers
• Follow care instructions given on the car seat cover.
Plastic/metalparts
• Wipe clean using a mild soap and warm water.
• You must not remove, dismantle or alter any part of the seat shell.
• You must not oil or lubricate any part of the seat shell.
Inspection
• Check your child seat regularly for wear and tear.
• Check the adjustable parts of your child seat at intervals of 6 months to ensure it
still fits your child correctly.
Loading...