Kiddicare Isabelle, Olivia Instruction Manual

kiddicare

isabelle

dresser

Important: Keep for future reference. Read carefully

Instruction Manual

parts

ABC

DEFGHIJKLMNO2

x 2 (L & R)

x 1

x 2

x 2 (L & R)

x 4 (2 each L & R)

x 1

x 2

x 1

x 2

x 1

P

Q

x 4

hardware

Tools required

ﬂat-bladed screwdriver

cross-point screwdriver

hexagon key

123

45678

9

included

not

included

not

x 20

x 22

x 4

x 6

35mm x 12

45mm x 6

30mm x 4

x 4

10 20 30 40 50 60 70 80 90 1000

(millimeters)

Measure

3

assembly

1

2

x4

B

DFG

E

x 6

(each end)

E

GFD

A

7 x 3

9 x 3 4

1

assembly

3

4

B

5

x 4

7 x 3

9 x 3

x 4

CA8

8

assembly

5

6

2

x 10

(each panel)

NOTE: Slot at top

H

I

3

x 2

(each side)

4

x 2

QQK

M

J

Repeat for second drawer

wheel at rear

assembly

7

8

7

3

x 7

L

Repeat for second drawer

completed drawer

8

assembly

P

10

x 4

x 8

N

O (x 2)

1

6

x 4

5

Insert ﬁttings 5 with arrowed slot pointing toward the edge of parts O and P. Once assembled, use a large screwdriver to give 1/2 turn clockwise to lock.

O

ONP

9

assembly

11

8

x 4

9

The dresser is supplied with a fixing kit which will secure it and help to guard against accidental tipping.

WARNING : Installation only to be carried out by a competent person. Check the suitability of the wall before fitting.

1. Place dresser against the wall where it is to be fitted. Mark the wall 25mm (1”) down from the top surface of the changer.

2. Using the 25mm screw, washer and the appropriate wall fixing attach the fabric strap to the marked position.

3. Remove the top drawer and thread the free end of the strap through the slot in the back panel.

4. From the inside of the dresser, attach the fabric strap to the dresser frame using the 15mm screw and the washer. Refit the top drawer. Before use, ensure that the strap is securely fixed to both the wall and the dresser.

1

2

3

4

The type of wall fixing you will require depends on the construction of the wall. See below for details. If in doubt, seek professional advice.

Wood: If ﬁxing to wood make sure that it isn’t chipboard as screws can easily pull away the core structure.

Brick or masonry: Use the wall plug, provided you are sure that your wall is sound.

Cavity wall: Special toggle wall plugs needed. Seek expert advice.

Washer x 2

Fabric strap

Plastic wall plug (For brick or masonry wall use only)

Screw (25mm)Screw (15mm)

assembly

10

safety

WARNING: Do not leave your child unattended.

! All assembly ﬁxings should always be tightened properly. Care should be taken that no

screws are loose because a child could trap parts of their body, or clothing (e.g. strings, necklaces, ribbons, dummies, etc.) which could pose a risk of strangulation.

! Be aware of the risks of open ﬁres and other such sources of strong heat, such as

electric bar ﬁres, gas ﬁres, etc. in the near vicinity of the dresser.

! Suitable for use with a changing mat of maximum dimensions 75 x 48 cm.

! The changing area is suitable for use up to 12 months old or 11kg in weight.

! Do not use the dresser if any of the parts are broken, torn or missing.

! Any additional or replacement parts can only be obtained from the manufacturer or the

distributor.

! This product conforms to: BSEN 12221:2008 +A1:2013.

! Ensure that the wall strap is used to securely attach the dresser to the wall to prevent

tipping.

maintenance

Take care when handling or moving the furniture. Careless handling may cause damage. Regularly check that all ﬁxings are tightened and that there are no broken or damaged parts.

Your dresser can be cleaned by wiping with a damp cloth and drying with a soft clean cloth. Do not use abrasives, bleach, alcohol or ammonia based household polishes.

cleaning

11

Kiddicare Club Way Cygnet Park Hampton Peterborough Cambridgeshire PE7 8JA

Customer Care: hello@kiddicare.com

kiddicare

11/13

Kiddicare Isabelle, Olivia Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual