Kicker TCVR10, DCVR12, DCVR10 User Manual
2005 CompVR Box Manual d less 4.qxp 10/19/2004 3:35 PM Page 2
3
Features
Features
y Injection Molded Polymineral Cone with ISD
™
(Inverted Structural Dome) is a high performance
composite, which remains rigid, minimizes cone flex and lowers
harmonic distortion. The CompVR’s cone consists of a unique
one-piece, aluminum vapor-deposit material that moves as a
light weight piston, exhibiting power and control.
y
Rear Cone Brace integrates into the CompVR’s cone with a
continuous contact perimeter weld, which offers unmatched
strength and resistance to deformation under pressure.
y
Double Stitched Surround adds a mechanical fastener to
the chemical adhesives. This duo prevents the cone and
surround from separating in the harshest conditions.
y
Optimized Polyfoam Ribbed Surround Radius allows
extended cone excursion for additional bass output and higher
SPL, and couples the suspension into a conjoined linearmotion body.
y
High-Temp Polyimide Film Voice Coil Former
improves sonic and conductive properties, and prevents
thermal-electrical meltdown.
y
Dual Ultra-Length Voice Coils sustain enormous cone
excursion and provide flexible impedance matching options.
y Sleeved High-Power Tinsel Lead Wires eliminate
broken leads and power loss, due to the common use of
“insufficient-gauge” lead wires. The lead wires are terminated
with polymer-based strain-relieving mechanical fasteners.
y
Human Fine-Tuned Enclosures and computer-modeling
allow Kicker’s award winning CompVR subwoofers to offer
bass performance that surpasses most custom made boxes.
y
One-Piece Uniplate™with Vented Hyper-Extended
Pole Piece and Backplate
1. Optimizes heat transfer efficiency for cooler operation
and maximum power handling ability.
2. Eliminates erratic magnetic flux from the voice-coil gap.
3. Releases pressure under the suspension for uniform
cone movement and responsive low bass.
4. Prevents the voice-coil from bottoming out and
corresponding damage.
y
New Enhanced BAM (Basket and Motor) Assembly
utilizes a high strength steel basket, features a low-profile open
design, and provides a solid foundation for the precisionaligned motor assembly.
y
Perimeter Venting in the BAM relieves pressure from
under the spider, supports a linear excursion, and helps
dissipate heat from the voice coil and motor structure.
CompVR Subwoofer Enclosures
2
Introduction
CompVR
Subwoofer Enclosure
Manual
Models:
DCVR12 / DCVR10 / TCVR10
CompVR Subwoofer Enclosures
Attention:
Please record your purchase information in the area
below. We recommend attaching the original sales
receipt to this manual for future reference.
If you require service on this speaker during the
warranty period, you will need to provide this
information and a copy of the original sales receipt to
Kicker for validation of warranty repairs.
ALWAYS KEEP YOUR RECEIPT!
Congratulations!
You have purchased one of the most
versatile subwoofers systems in car
audio. The CompVR Enclosure was
designed by the award-winning KICKER
speaker design team, tested in the
judging lanes of International Sound
Competitions, and proven on the Street to
deliver the ultimate in low bass output,
durability and outrageous SPL.
This is your “fuel for Livin’ Loud
™
”!
Authorized Kicker Dealer:
Purchase Date:
Enclosure Model Number:
_____________________________________________
_____________________________________________
_____________________________________________
2005 CompVR Box Manual d less 4.qxp 10/19/2004 3:35 PM Page 4
Loading...