Kicker ST800, ST1000 User Manual

ST SERIES

Full Range Enclosure Systems

Congratulations! You have just purchased the latest in full range speaker enclo­sures to carry the famous KICKER name. Your KICKER speakers were designed and
engineered by the same team which created many other international award
winning KICKER components like the Solo-Baric, Comp VR, and Resolution driv­ers. They contain a number of cutting-edge features to give you outstanding per­formance and dependability. Thanks for buying KICKER. Enjoy!

Installation Instructions

Place the enclosure behind the seat
of your pickup with the tweeter toward
the outside of the vehicle.

Plug the speaker wires securely into
the left and right speaker terminals.
Make certain the polarity is the same
on both sides. Failure to do this will
result in the two channels being out of
phase and will drastically reduce bass
performance.

Specifications

Model Type (per enclosure) Min. / Max. Response (H x W x D)

ST1000

ST800 2-Way 8” woofer, 6 / 125 42-21kHz 13-1/16”x18”x6-7/8”

All models are 4 Ω, dual enclosure systems
* assumes typical music program with minimal amplifier clipping

This speaker system is designed to be placed behind the seats of a pickup. If using the
system in any other type of installation, you must securely fasten each enclosure to the
vehicle to avoid potential injury from forward movement of the enclosures during
abrupt stops or accidents.

Components Amplifier Power Frequency Dimensions

2-Way 10” woofer, 6 / 150 40-21kHz 14-1/2”x20-1/2”x7-1/4”

3-3/4” exponential tweeter 36.83cmx52.07cmx18.42cm

3-3/4” exponential tweeter 33.18cmx45.72cmx17.46cm

IIMMPPOORRTTAANNTT WWAARRNNIINNGG

SPEAKER SYSTEMS LIMITED WARRANTY

Stillwater Designs warrants this product to be free from defects in material and workmanship under

normal use for a period of one (1) year from date of original purchase from an Authorized
Kicker Dealer, unless this product is labeled “B Stock”, in which case it is warranted for ninety (90) days
from date of purchase. Should service be necessary under this warranty for any reason due to manufac­turing defect or malfunction during the warranty period, Stillwater Designs will replace or repair (at its
discretion) the defective merchandise with equivalent merchandise at no charge. Warranty replacements
on “B-Stock” may have cosmetic scratches and blemishes. Discontinued products may be replaced with
equivalent products.

This warranty is valid only for the original purchaser and is not extended to owners of the product

subsequent to the original purchaser. Any applicable implied warranties are limited in duration to a period
of the express warranty as provided herein beginning with the date of the original purchase at retail, and
no warranties, whether express or implied, shall apply to this product thereafter. Some states do not
allow limitations on implied warranties, therefore these exclusions may not apply to you.

This warranty gives you specific legal rights; however you may have other rights that vary from state to

state.

WHAT TO DO IF YOU NEED WARRANTY OR SERVICE

Defective merchandise must be returned to your local Authorized Stillwater Designs (Kicker) Dealer for
warranty. Assistance in locating an Authorized Dealer can be obtained by writing or calling Stillwater
Designs direct. You can confirm that a dealer is authorized by asking to see a current authorized dealer
window decal.

If it becomes necessary for you to return defective merchandise, call the Kicker Customer Service
Department at [phone] for a Return Authorization (RA) number. Package all defective items in the
original container or in a package that will prevent shipping damage, and return to

Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075

The RA number must be clearly marked on the outside of the package. Return only defective compo­nents. Return of entire cabinets, system packs, pairs, etc. increases your return freight charges. Non­defective items received will be returned freight collect.

Include a dated proof-of-purchase from an Authorized Dealer. Warranty expiration on items
returned without proof-of-purchase will be determined from the manufacturing date code. Coverage
may be invalidated if this date is greater than 18 months previous to the date item is sent in. Freight
must be prepaid; items received freight collect will be refused.

Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker
Customer Service Department at [phone].

WHAT IS NOT COVERED?

This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover:

• Install slips (screwdriver holes)

• Damage caused by exposure to water
and/or excessive heat.

• Damage through negligence, misuse, or
accident.

• Items physically damaged due to abuse.

• Freight damage.

• The cost of shipping product to Stillwater
Designs Service.

• Items previously repaired by any
unauthorized repair facility.

• Items returned from unauthorized
individuals or dealers.

• Return shipping on non-defective items.

• Speakers damaged due to amplifier
clipping or distortion.

• Speakers with silicon caulk used for gasket
material.

HOW LONG WILL IT TAKE?

Stillwater Designs maintains a goal of 24-hour service for all returns. Delays may be

incurred if lack of replacement inventory or parts is encountered.

INTERNATIONAL WARRANTY

Contact your International Stillwater Designs dealer or distributor concerning specific

procedures for your country’s warranty policies.

P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • 405 624-8510

KICKER drivers are capable of producing sound levels that can permanently
damage your hearing! Turning up a system to a level that has audible distor­tion is more damaging to your ears than listening to an undistorted system at
the same volume level. The threshold of pain is always an indicator that the

WARNING:

sound level is too loud and may permanently damage your hearing.
PPleaase use common sense when controlling volume!!

February 2002