
(fKICKERĀ®
SOLOCLASSICSUBWOOFEREnclosureOwner'sManual
Models:
Authorized KICKER Dealer:
Purchase Date:
Enclosure Model Number:
Enclosure Serial Number:
The KICKER Solo Classic subwoofer enclosures were specially designed to
behind truck seats or inside compact trunks. The Solo Classic subwoofer provides high-performance
bass despite its size reduction over normal KICKER subwoofers.
CHECK
T e Solo Classic subwoofer enclosures are internally wired for a 2 or 4 ohm load at he speaker-wire
connection terminal. Please refer to this terminal or the box packaging for your enclosure's specific
impedance Check to seeifyour amplifierisoptimized to drive this load.
SOLO
The Solo Classic-series sealed enclosures combine KICKER's award-winning line of subwoofers with
computer-modeled and human fine-tuned enclosures to offer a level of bass performance never before
thought possible from a commercially available, ready-to-install subwoofer system. The SS12C enclosure
features a 12 inch Solo Classic subwoofer, the
Subwoofer, and the DS12C enclosure features two 12 inch Solo Classic subwoofers.
THE
LOAD
CLASSIC
------------
SEALED
OS12C
/ SS12C / TS10C
fitinsmall spaces such as
TS1OCenclosure features a 10 inch Solo Classic
The
KICKER
or wherever spaceislimited.
Plug your subwoofer speaker wire into the terminals using the red connector as positive and the black
connector as negative. Hook the other end of the wire to your subwoofer amplifierinaccordance with its
owner's manual.
Solo Classic-series enclosures are designed to
fit
behind the seat of a pickup truck, coupe,
PERFORMANCE
Model:
Nominal Impedance
Sensitivity [SPLo], dB @ 1W,1m
Power Handling Watts, Peak
Enclosure Top Surface Depth,in(cm)
Enclosure Bottom Surface Depth,in(cm)
Enclosure Height,in(cm)
Enclosure Width,in(cm)
[Zn],
ohm [per coil]
(RMS)
OS12C
2or4
87.2
2400
(1200)
8 (20.1) 8 (20.1)
111/8(28.2) 111/8(28.2)
15 (38.1) 15 (38.1)
325/16(82.1)
SS12C
2or4
87.2
1200
(600)
161/2(41.9)
TS10C
2 or 4
86.2
900
(450)
5 (12.6)
8
1/4
(21)
13
1/4
18(45.7)
(33.7)
Note: The use of a sllbsonic filter will significantly increase power handling. The power handling specification
is
calculated using a 25Hz, 24dB/octave subsonic
2 SOLOCLASSICSUBWOOFERENCLOSURE
filter.
in
this chart