Kicker S12X User Manual

X
SOLOXSUBWOOFER
S12X, S10X
©2006 Stillwater Designs
AcousticsLimitedWarranty
Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the original receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, Kicker will repair or replace (at its discretion) the defective merchandise with equivalent merchandise at no charge. Warranty replacements may have cosmetic scratches and blemishes. Discontinued products may be replaced with more current equivalent products.
This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties; therefore these exclusions may not apply to you. This warranty gives you specific legal rights; however you may have other rights that vary from state to state.
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE
Defective merchandise should be returned to your local Authorized Stillwater Designs (Kicker) Dealer for warranty service. Assistance in locating an Authorized Dealer can be found at www.kicker.com or by contacting Stillwater Designs directly. You can confirm that a dealer is authorized by asking to see a current authorized dealer window decal.
If it becomes necessary for you to return defective merchandise directly to Stillwater Designs (Kicker), call the Kicker Customer Service Department at (405) 624-8510 for a Return Merchandise Authorization (RMA) number. Package only the defective items in a package that will prevent shipping damage, and return to:
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075
The RMA number must be clearly marked on the outside of the package. Please return only defective components (most likely the SPAIR). The return of functioning items increases your return freight charges. Non-defective items will be returned freight-collect to you. For example, if a subwoofer is defective, only return the defective subwoofer, not the entire enclosure.
Include a copy of the original receipt with the purchase date clearly visible, and a "proof-of-purchase" statement listing the Customer's name, Dealer's name and invoice number, and product purchased. Warranty expiration on items without proof-of-purchase will be determined from the type of sale and manufacturing date code. Freight must be prepaid; items sent freight-collect, or COD, will be refused.
WHAT IS NOT COVERED?
This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover: o Burnt voice coils o Damage due to improper installation o Subsequent damage to other components o Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation o Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be
considered abuse o Any cost or expense related to the removal or reinstallation of product o Speakers damaged due to amplifier clipping or distortion o Items previously repaired or modified by any unauthorized repair facility o Return shipping on non-defective items o Products with tampered or missing barcode labels o Products returned without a Return Merchandise Authorization (RMA) number o Freight Damage o The cost of shipping product to Kicker o Service performed by anyone other than Kicker
HOW LONG WILL IT TAKE?
Kicker strives to maintain a goal of 24-hour service for all acoustics (subwoofers, midrange drivers, tweeters, crossovers, etc) returns. Delays may be incurred if lack of replacement inventory or parts is encountered.
Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker Customer Service Department at (405) 624-8510. Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty policies.
© 2007 Stillwater Designs
Model:
Nominal Impedance [Zn], ohm (2Ω model) [per coil]
Resonance Frequency [fs], Hz (2Ω model)
Sensitivity [SPLo], dB @ 1W, 1m (2Ω model)
Effective Piston Area [Sd], in2(m2)
Power Handling Watts, Peak (RMS)
Effective Excursion [EXmax], in (mm)
DC Resistance [Re], ohm (2Ω model) [coils in series]
Voice Coil Inductance [Le], mH (2Ω model)
Mechanical Q-Factor [Qms] (2Ω model)
Electrical Q-Factor [Qes] (2Ω model)
Total Q-Factor [Qts] (2Ω model)
Force Factor [BL], Tm (2Ω model)
Moving Mass [Mms], g (2Ω model)
Equivalent Volume [Vas], ft3(2Ω model)
Equivalent Volume [Vas], L (2Ω model)
Net Displacement, in3(cc)
Mounting Depth, in (cm)
Weight, lb (kg)
S12X4/2Ω
4 (2)
37.8 (37.81)
87.80 (87.55)
106.8 (.0689)
5000 (2500)
.906 (23)
7.17 (4.09)
6.833 (4.654)
9.441 (10.076)
.550 (.458)
.520 (.438)
30.60 (27.6444)
302.6 (361)
1.3949 (1.1696)
39.50 (33.1245)
328.32 (5380)
8 9/16 (21.7)
47 (21.32)
S10X4/2Ω
4 (2)
40.5 (36.237)
85.95 (85.65)
74.4 (.048)
5000 (2500)
.906 (23)
7.06 (3.99)
6.600 (5.512)
9.954 (10.266)
.497 (.393)
.474 (.379)
30.99 (26.7089)
265.8 (309)
.702 (.7216)
19 (20.4376)
311.04 (5100)
8 3/8 (21.3)
46 (20.87)
WiringOptions
SoloX subwoofers are available with dual 4Ω (ohm) or dual 2Ω voice coils. Both coils must be connected to a source of amplification. The dual 4Ω woofer will generate a 2Ω load if the coils are wired in parallel or a 8Ω load in series. The dual 2Ω woofer will provide a 1Ω load wired in parallel or 4Ω load wired in series. The terminals with the white dots are for the first voice coil. The terminals with solid-red and solid-black markings are for the second voice coil. See Figures 1 and 2.
PERFORMANCE
Congratulations on your
KICKER purchase
Please record your purchase
information and keep your sales
receipt for validation of warranty.
Note: All specifications and performance figures are subject to change. Please visit the www.kicker.com for the most current information.
Please allow two weeks of break-in time for the subwoofer to reach optimum performance. To get the best performance
from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring.
2
INSTALLATION
SOLOXSUBWOOFER
Owner’sManual
S12X / S10X
Models:
SOLOXSUBWOOFER
3
Authorized Kicker Dealer:
Purchase Date:
Subwoofer Model Number:
Subwoofer Serial Number:
_________________________
_________________________
_________________________
_________________________
SealedEnclosureApplications
The SoloX generates more sound pressure than competing subwoofers on the market and pounds down low when used in the recommended sealed boxes. If you are willing to give up maximum SPL for more sub-bass output, these sealed enclosure recommendations will be your thing. The sealed enclosure designs give the smoothest response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive amounts of highly-accurate bass and can be driven with punishing levels of amplifier power.
The SoloX performance suspension system can operate in a larger sealed enclosure. This maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ enclosure generates a very flat response curve and superbly extends the subbass response.
SoloX subwoofers perform well in any size sealed enclosure between the Compact and SQ volume recommendations. These systems will exhibit benefits of both designs: Compact produces high-impact bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations have been calculated with the airspace inside the enclosure and include the displacement of the woofer. All sealed-enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing. Do not make the airspace greater than the SQ, maximum enclosure volume, recommendation.
Model:
S10X
S12X
SealedSQ (MaximumEnclosureVolume)
2 ft3(56.6L) Power Handling = 2000W Peak
Fb = 65.9 Hz, F3 = 36.1 Hz
3 ft3(85L) Power Handling = 2500W Peak
Fb = 68.7 Hz, F3 = 36.7 Hz
SealedCompact (MinimumEnclosureVolume)
1 ft3(28.3L) Power Handling = 2500W Peak
Fb = 70.4 Hz, F3 = 40.9 Hz
1.5 ft3(42.5L) Power Handling = 2500W Peak
Fb = 73.4 Hz, F3 = 42.3 Hz
Performance
The Kicker SoloX subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive competition environment. The SoloX is the Legend. SoloX subwoofers have all the latest technological
enhancements available and surpass the competition in a sealed or vented box. They are made of advanced materials and construction techniques to maintain optimal performance for competition use and critical listening.
Figure 3
Cutout
Brace
Sealed Enclosure Brace Detail
Note: The use of a subsonic filter will significantly increase the power handling. The power handling specifications in these charts are
calculated using a 25Hz (68Hz for the Vented SPL enclosure), 24dB per octave sub-sonic (resonate frequency) filter.
ParallelWiring
Dual 4Ω Voice Coils = 2Ω Load Dual 2Ω Voice Coils = 1Ω Load
Figure 1
Coil 1 +
Coil 2
+
Coil 2 -Coil 1 -
Amplifier ­Speaker Connection
Amplifier
+
Speaker Connection
SeriesWiring
Dual 4Ω Voice Coils = 8Ω Load Dual 2Ω Voice Coils = 4Ω Load
Figure 2
Coil 1 +
Coil 2 +
Coil 2 -Coil 1 -
Amplifier ­Speaker Connection
Amplifier
+
Speaker Connection
Figure 4
Y
X
Z
Loading...
+ 2 hidden pages