Kicker DS12C, SS12C, TS10C Owner's Manual

SC

SOLOCLASSICSUBWOOFERENCLOSURE

DS12C / SS12C / TS10C

English Version

Versión Español

Caja de Subwoofer Solo Classic
Manual del Propietario

Deutsche Version

Solo Classic Subwoofer Gehäuse
Benutzerhandbuch

Version Française

Caisson de graves Solo Classic
Manuel d’utilisation

2009 SCBOX Multilingual d01.indd 12009 SCBOX Multilingual d01.indd 1 11/21/2008 3:30:09 PM11/21/2008 3:30:09 PM

SOLOCLASSICSUBWOOFEREnclosureOwner’sManual

DS12C / SS12C / TS10CModels:

Authorized KICKER Dealer:

Purchase Date:

Enclosure Model Number:

Enclosure Serial Number:

The KICKER Solo Classic subwoofer enclosures were specially designed to fi t in small spaces such as
behind truck seats or inside compact trunks. The Solo Classic subwoofer provides high-performance
bass despite its size reduction over normal KICKER subwoofers.

CHECK THE LOAD

The Solo Classic subwoofer enclosures are internally wired for a 2 or 4 ohm load at the speaker-wire
connection terminal. Please refer to this terminal or the box packaging for your enclosure’s specifi c
impedance. Check to see if your amplifi er is optimized to drive this load.

SOLO CLASSIC SEALED

The Solo Classic-series sealed enclosures combine KICKER’s award-winning line of subwoofers with
computer-modeled and human fi ne-tuned enclosures to offer a level of bass performance never before
thought possible from a commercially available, ready-to-install subwoofer system. The SS12C enclosure
features a 12 inch Solo Classic subwoofer, the TS10C enclosure features a 10 inch Solo Classic
Subwoofer, and the DS12C enclosure features two 12 inch Solo Classic subwoofers.

The KICKER Solo Classic-series enclosures are designed to fi t behind the seat of a pickup truck, coupe,
or wherever space is limited.

Plug your subwoofer speaker wire into the terminals using the red connector as positive and the black
connector as negative. Hook the other end of the wire to your subwoofer amplifi er in accordance with its
owner’s manual.

PERFORMANCE

Model: DS12C SS12C TS10C

Nominal Impedance [Zn], ohm [per coil] 2 or 4 2 or 4 2 or 4
Sensitivity [SPLo], dB @ 1W, 1m 87.2 87.2 86.2
Power Handling Watts, Peak (RMS) 2400 (1200) 1200 (600) 900 (450)
Enclosure Top Surface Depth, in (cm) 8 (20.1) 8 (20.1) 5 (12.6)
Enclosure Bottom Surface Depth, in (cm) 11 1/8 (28.2) 11 1/8 (28.2) 8 1/4 (21)
Enclosure Height, in (cm) 15 (38.1) 15 (38.1) 13 1/4 (33.7)
Enclosure Width, in (cm) 32 5/16 (82.1) 16 1/2 (41.9) 18 (45.7)

Note: The use of a subsonic fi lter will signifi cantly increase power handling. The power handling specifi cation in this chart
is calculated using a 25Hz, 24dB/octave subsonic fi lter.

2

SOLOCLASSICSUBWOOFERENCLOSURE

2009 SCBOX Multilingual d01.indd 22009 SCBOX Multilingual d01.indd 2 11/21/2008 3:30:18 PM11/21/2008 3:30:18 PM

Mount the brackets to the bottom of the
enclosure using the supplied smaller
screws. Securely attach the
enclosure to the vehicle
with the supplied
larger screws.

Pro Tip: You are one
ZX Mono-Amplifi er and a few
cables away from a complete, high-quality
system with rock-solid bottom end, as only
available from KICKER! The KICKER ZX line of
mono-amplifi ers makes it easy to upgrade the
bassline of your stock or aftermarket source
unit. Please ask your dealer about KICKER ZX
amplifi er upgrades.

Behind-the-seat mounting:

subwoofer fi res

into the back of

the seat.

Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.

IMPORTANT SAFETY WARNING

To avoid potential injury or possible death from forward movement of the enclousre during abrupt stops or
accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are soley
responsible for securely fastening the enclosure in your vehicle.

stillwaterdesigns

P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510

Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine
KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum
performance.

3

2009 SCBOX Multilingual d01.indd 32009 SCBOX Multilingual d01.indd 3 11/21/2008 3:30:18 PM11/21/2008 3:30:18 PM

CAJADESOLOCLASSICManualDelPropietario

DS12C / SS12C / TS10CModelo:

Distribuidor autorizado de KICKER:

Fecha de compra:

Número de modelo del Subwoofer:

Número de serie del Subwoofer:

El KICKER Solo Classic Subwoofer Caja se diseñó para “Livin’ Loud” en el ambiente automotor duro.
Utiliza las técnicas avanzadas de materias y construcción para mantener el desempeño que óptimo para
años para venir.

VERIFICA LOS OHMIOS

Esta Solo Classic caja tiene cableado interno para producir una carga de 2 ó 4 ohmios en las terminales
de conexión de cable de altavoz. Consulte la terminal o el empaque de la caja para saber la
impedancia específi ca de su caja. Asegúrese de que su amplifi cador puede manejar esta carga.

SOLO CLASSIC CAJAS SELLADAS

Las cajas ventiladas de la serie Solo Classic combinan los galardonados subwoofers de Kicker con cajas
afi nadas por seres humanos y diseñadas por computadora para ofrecer un rendimiento de bajos que
nunca antes se había imaginado que fuera posible obtener de un sistema de subwoofer comercialmente
disponible y listo para instalar. Las cajas de la Serie TS10C vienen con un Solo Classic de 10 plg. (25.4
cm), las cajas de la Serie SS12C vienen con un Solo Classic de 12 plg. (30.5 cm), las cajas de la Serie
DS12C vienen con dos Solo Classic de 12 plg. (30.5 cm), incorporado de antemano.

Las cajas Solo Classic de KICKER han sido diseñadas para ir detrás del asiento de la camioneta, el cupé
o dondequiera espacio se limita. Para dar la mejor respuesta de bajos cuando dirigen el sonido hacia la
parte de atrás del asiento del vehículo.

Enchufe el cable de altavoz del subwoofer en las terminales. Use el conector rojo como positivo y
el negro como negativo. Enchufe el otro extremo de este cable en el amplifi cador del subwoofer de
acuerdo con las instrucciones del manual del propietario.

RENDIMIENTO

Modelo: DS12C SS12C TS10C

Impedancia nominal [Zn], ohmios [por caja] 2 or 4 2 or 4 2 or 4

Sensibilidad [SPLo], dB @ 1W, 1m 87.2 87.2 86.2

Procesamiento máximo de potencia vatios, pico (RMS) 2400 (1200) 1200 (600) 900 (450)

Profundidad de la superfi cie superior de la caja, plg. (cm) 8 (20.1) 8 (20.1) 5 (12.6)

Profundidad de la superfi cie inferior de la caja, plg. (cm) 11 1/8 (28.2) 11 1/8 (28.2) 8 1/4 (21)

Altura de la caja, plg. (cm) 15 (38.1) 15 (38.1) 13 1/4 (33.7)

Anchura de la caja, plg. (cm) 32 5/16 (82.1) 16 1/2 (41.9) 18 (45.7)

Nota: El uso de un fi ltro subsónico aumentará signifi cativamente el procesamiento de potencia. Las especifi caciones
de procesamiento de potencia que aparecen en la tabla anterior se calculan utilizando un fi ltro subsónico de 25 Hz y 24
dB/octava.

4

2009 SCBOX Multilingual d01.indd 42009 SCBOX Multilingual d01.indd 4 11/21/2008 3:30:22 PM11/21/2008 3:30:22 PM

CAJASSOLOCLASSICSUBWOOFER