KIAM aquarius Pro Valet Instruction Manual

1

INSTRUCTION MANUAL

Please read the operation instructions and precautions in this Manual before using the Cleaner.

2

IMPORTANT - READ THIS INFORMATION BEFORE OPERATING THE MACHINE

The Kiam Aquarius Pro Valet is designed for the spray / extraction cleaning of soiled carpets &
upholstery. Widely used by professional cleaners, valeting companies and around the home, the
Aquarius gives reliable performance & long life.

WARNING

Please ensure that when using electrical equipment, care and attention must be exercised at all times
during its use.
Do not use themachine where it is suspected that the carpet or upholstery contains health endangering
dust or debris such as asbestos or chemical waste. If this is suspected do not proceed, contact your
supervisor or Equipmart Ltd for advice. The machine must only be used for the manufacturer’s approved
application – i.e. for the cleaning of normal carpet & upholstery dirt. The following instructions contain
important information about the machine and safety advice for the operator. Equipment must be
operated, serviced and maintained in accordance with the manufacturer’s instructions. If in doubt contact
the supplier of your machine.

CAUTION

Before using the Kiam Aquarius cleaner - basic safety precautions should be followed including…

 Read all instructions carefully before use.
 Do not use where hazardous dust is present.
 Do not use in an explosive atmosphere.
 Keep children and unauthorised persons away from the machine when in use.
 Be careful when using a machine near the top of stairs to avoid overbalancing.
 Do not leave the machine connected to the electricity supply when not in use; always remove the

plug from the socket-outlet.

 Switch off the machine before removing the plug.
 Do not touch or operate the switches with wet hands as this may cause electric shock.
 Do not operate the machine with a damaged supply cable or plug, or after the machine malfunctions

or is damaged in any way. Contact Equipmart on 0151 548 5500 for repair or service.

 Do not pick up oil or other flammable material with the machine
 The plug of the power supply cable must be removed from the socket-outlet before starting cleaning

of the machine or undertaking maintenance operations.

 The power supply cable must be regularly inspected for signs of damage. If the power cord is

damaged, it must be replaced.

 Keep cleaning solutions away from children and pets at all times
 Do not leave the machine running unattended
 This machine should only be used Indoors and should not be used or stored outdoors or in wet

conditions.



WARNING – Should water emit from the machine exhaust switch off immediately and refer to instructions
for Using the Machine

3

CARRYING THE MACHINE

 Detach the hose and wand from machine before carrying. Please ensure that all components, tanks

and removable parts are securely fastened, and that the supply cable and plug are coiled up, and not
trailing.

 All liquid should be removed from the machine before lifting.
 Take extreme care when moving the machine up or down steps or stairs.

CAUTION – Incorrect lifting techniques may result in personal injury. We advise that the manual handling
regulations are followed.

ELECTRICAL SAFETY

 Before connecting the machine to the power supply, refer to the specification label to ensure that your

supply voltage is correct for this particular model.

 The supply cable is fitted with a non rewireable plug containing a 13 amp fuse. Should the fuse

require replacement it must only be replaced by a 13 amp fuse conforming to BS1362, and the fuse
cover must be refitted. If the fuse cover is lost,the plug must not be used until the correct replacement
cover is fitted.

IMPORTANT

If the supply cable is damaged, it must only be replaced by a special cable available from the manufacturer or
an authorised service agent. Should an extension lead be used, ensure cable rating is adequate for the
equipment. Do not use an extension lead in coiled condition as this could result in overheating of the cable,
and damage to the motor.