Required
Tools
Disassembly Instructions
Material Type:
Engage Task Chair, Engage Stool, Piretti 2000 Task Chair, Piretti 2000 Stool
Page 1 of 3Rev. 1 P0033-0080
A. Steel B. Plastic C. Foam D. Fabric
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
Procedure:
1. Pry off the rear shrouds from the backrest.
2. Pry the Back Shroud from the Back Assembly.
3. Remove the screws holding the backrest to the steel backrest
support and remove the backrest.
(continued next page)
General Notes:
1. Disassembly time: 30-45 minutes
2. This procedure assumes basic familiarity with hand tools and
furniture terminology: no specialized training is required
3. All materials removed and disassembled shall be sorted and
segregated with like materials and disposed of or recycled
according to recycling availability or waste acceptance
4. For items to be recycled, refer to KI's End of Life Recycling
Matrix and KI's End of Life Recovery Options Matrix, available
at www.ki.com
All fasteners not explicitly tagged
are Material Type A: Steel
See Sheet 3
See Sheet 2
Gloves
Safety Glasses
Pry Bar
Philips Screwdriver
Rubber Mallet
Channel Lock Pliers
Torx Screwdriver
B
B
D
C
B
A
B
Required
Tools
Disassembly Instructions
Material Type:
Engage Task Chair, Engage Stool, Piretti 2000 Task Chair, Piretti 2000 Stool
Page 2 of 3Rev. 1 ©2013 Krueger International, Inc. All Rights Reserved · P0033-0080
A. Steel B. Plastic C. Foam D. Fabric
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
All fasteners not explicitly tagged
are Material Type A: Steel
4. Remove the screws holding any armrests and the seat to the
seat support mechanism and remove the armrests and seat.
5. Pry off the plastic control knob, handles and shrouds from
the support mechanism.
(continued next page)
B
B
B
C
B
C
D
A
C
B
B
C
B
B
Gloves
Safety Glasses
Channel Lock Pliers
Philips Screwdriver
Torx Screwdriver
Pry Bar
Rubber Mallet