KI Avail Operating And Care Instructions

Operating and Care Instructions

Avail™ Task Chair

Save for future reference

1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100

1-800-424-2432 • www.ki.com

© KI 2010 Litho in USA Code KI-62158/KI/IP/310

Deriving maximum
benefits from your
Avail task chair

To benefit from the Avail task chair’s
range of ergonomic features, individual
adjustments need to be made.

Seat Height – Proper cardiovascular
circulation requires the seat be at the
correct height. To achieve the correct
height, your feet should be flat on the
floor. To lower height while seated, lift
the lever at the right front of the seat.
To raise the height, remove your weight
from the seat while lifting the lever.

Care of your
Avail Task
Chair

Care of your Avail task chair is easy.
It requires no more care than any
other fine seating. Exclusive functional
mechanisms and component integrity
are thoroughly tested. A ten-year
warranty covers structural integrity,
while a one-year warranty covers
upholstery.

Periodic light cleaning is all that is
necessary. Use mild soap or detergent
with lukewarm water and a soft, non­scratching cloth to clean plastic surfaces,
upholstery, and powder-coated metal.

Stains and spots may require a more
thorough cleaning. For this we
recommend:

Fabric Upholstery - Use a foam-type
cleaner such as Johnson Wax
“Glory” or Earl Grissmer Co. “Blue
Lustre” for general cleaning. For more
stubborn spots and stains, use Texie
Chemical Co.’s “K2r”. Always follow
the manufacturer’s directions.

Plastic parts and powder-coated
finishes - Chewing gum and similar

stubborn spots may be removed with
cigarette lighter fluid. Wipe dry
immediately. Sunnyside Plastic Cleaner
is ideal for light cleaning. Buffing with
this product restores luster to smooth
surfaces. Its anti-static properties help
repel dust and dirt. High quality wax,
such as Johnson’s “Glo-Coat” or

“Simonize”, restores luster and protects
the finish. Follow container directions
and apply with a soft cloth and buff
thoroughly.

Caution: Do not use dry cleaning
agents on upholstery, or a coarse
cloth when applying cleaning agents
to smooth surfaces.

Arms - If your chair has arms, the
fasteners attaching the arms to the
underside of the seat should be
periodically tightened.

Back Lock – To lock the back in an
upright position, push in the lever at the
right front of the seat. To return the back
to its free-floating position, pull out the
lever.

Back Tilt Tension – To adjust the back
tilt tension, use the handle directly under
the front of the seat. To increase tilt
tension, turn the dial clockwise. To
decrease tilt tension, turn the dial
counter-clockwise.

height & width
adjustable arms
(optional)

seat height

back lock

tilt tension