KHIND DP-SP22, DP-SP21, DP-SP20, DP-ST22, DP-ST21 Instruction Manual
...
S
P
E
A
K
E
R
PLASMA MONITOR (DISPLA Y)
SPEAKER
DP-SP22
DP-SP21
DP-SP20
DP-HG22
DP-HG20
DP-ST22
DP-ST21
DP-ST20
PLASMA MONITOR (DISPLAY)
OPTIONS INSTRUCTION MANUAL
PLASMA MONITOR(DISPLA Y)
WALL HANGER UNIT
PLASMA MONITOR (DISPLA Y)
ST AND
S
T
A
N
D
HW
AA
NL
GL
E
R
U
N
I
T
S
P
E
A
K
E
R
PLASMA MONITOR (DISPLAY)
SPEAKER
INSTRUCTION MANUAL
DP-SP22
DP-SP21
DP-SP20
Thank you for purchasing the Plasma Display Speakers. These speakers are specifically
designed only for the Plasma Display. To ensure the safe operation of the unit, please read
these instructions before installing.
1
TABLE OF CONTENTS
1. Check for enclosed parts
............................
2
2. Important Safety Instructions
......................
3
3. Assembly Instructions
.................................
5
1)
Using speakers when attached to the plasma display
2) Using speakers on stand
PLASMA DISPLAY SPEAKER
2
S
P
E
A
K
E
R
1. PLEASE CHECK THE
FOLLOWING ITEMS
HA VE BEEN SUPPLIED
(2) (16)
(2) (4)
(2) (4)
SPEAKERS
M5 SCREWS
VIBRA TION ABSORBENT SPONGE
SPECIAL SCREWS
/ ROUND HEAD SCREWS
SPEAKER WIRES
FIXED BRACKETS STAND
(2)
3
2. IMPORTANT SAFETY INSTRUCTIONS
PLEASE KEEP THESE INSTRUCTIONS FOR YOUR SAFETY AND TO PREVENT ANY DAMAGE TO THIS UNIT.
PLEASE FOLLOW THESE INSTRUCTIONS FOR YOUR SAFETY
(Doing so may cause the unit to fall and break)
(Failing to do so may cause the unit to vibrate and to fall)
(Failing to do so may cause the unit to fall and break) (Failing to do so can damage the speaker circuits resulting in fire)
(It can cause electric shock or injury to the child)
Do not use any parts other than those
enclosed.
Do not leave out any part when assembling.
Please install all parts as directed.
Do not alter or modify any parts
Do not use the speakers with other products.
These speakers are specifically manufactured to be
used with the Plasma display to enhance your
listening pleasure.
Do not allow a child to cling from or climb onto
the speakers
Do not place the speakers on sloped or
unstable surfaces.
WARNING
CAUTION
WARNING : Disregarding these instructions can result in serious injury.
CAUTION : Disregarding these instructions will result in the mistreatment of
the unit and can result in injury or damage to the unit.
(Doing so may cause the speakers to fall off or
tip over causing injury and damage.)
PLASMA DISPLAY SPEAKER
4
S
P
E
A
K
E
R
Please be careful not to stain the speakers with
any chemical, petrol or oil.
When assembling, be sure to use the enclosed
parts and make sure all parts are tightly
screwed as instructed.
Do not place the speakers in a humid or dusty
place.
Do not place the speakers near heating units.
Do not place speakers near a humidifier, or
cooking pots where speakers will be exposed
to steam or smoke.
Please be sure to connect (+) inputs and (-)
inputs correctly when connecting speakers to
plasma display.
*
PLEASE FOLLOW THESE SAFETY PRECAUTIONS WHEN INST ALLING OR HANDLING
(Failing to do so will cause the speakers to
vibrate and unable to produce clear sound.)
(Doing so will change the outer appearance)
(Failing to do so may damage the units)
(Failing to do so may cause discoloration or
damage to speakers)
(If not connected correctly, it may result in distorted sound)
(Failing to do so will damage the speakers)
5
3. ASSEMBLING INSTRUCTIONS
USING SPEAKERS WHEN ATTACHED TO THE PLASMA DISPLAY
ATTACHING VIBRATION ABSORBENT SPONGES TO SPEAKERS
INSTALLING FIXED BRACKETS TO SPEAKERS
.
Clean the surface with soft, lint-free cloth
where sponges will be attached.
.
Attach the sponge to the side of the
speaker that will be attached to the
plasma display.
Please leave a 5 mm space on the top
and bottom when attaching. Do not
cover the entire side with the sponge
as shown in the picture above.
5mm
(2 inch)
5mm
(2 inch)
.
Install fixed brackets to speakers before
attaching speakers to plasma display.
Please make sure which side the fixed
brackets will be screwed to,
considering the left and right side of
speakers as shown in the picture to
the left.
Fixed brackets
Sponge-attached side
1
2
Note
Note
PLASMA DISPLAY SPEAKER
6
S
P
E
A
K
E
R
INSTALLING SPEAKERS TO THE PLASMA DISPLAY
.
Place a protective covering over the surface you will be working on and lay
the plasma display as shown below.
.
Take the speakers with fixed brackets to the back of the plasma display. Place the hooks on the
fixed brackets to the squared holes in the back of the plasma display.
.
Now tightly secure the
hooks with the M5 screws.
Hooks
3
Note
.
Please be sure to secure the screws to avoid
any shaking or looseness.
7
CONNECTING SPEAKER WIRES
.
Take the speaker wire(2) and use the red cord to connect to and from (+)
inputs, and use the black cord to connect to and from (-) inputs.
4
.
Please be sure to connect red wires with (+) and black wires with (-);
otherwise, speakers will not produce clear sounds.
.
Please retain the left over accessories.
Note
Loading...