KHD CW450 Quick Start Manual
www.khd.hk
3G Wireless Router CW450
EVDO A , 450MHZ
Quick Start Guide
- 2 -
Thank you for purchasing CW450! This high cost-efficiency router is the
best choice for Small office / Home office users, all computers and network
devices can share 3G internet via Ethernet or Wi-Fi, and also share a single
xDSL / cable modem internet connection at high speed. Easy install
procedures allows any computer users to setup a network environment in
very short time - within minutes, even inexperienced.
Package list
Before you starting to use this router, please check if there’s anything missing
in the package, and contact your dealer of purchase to claim for missing
items.
Broadband router (main body, 1 pcs)
Quick Installation Guide (1 pcs)
9V DC power adapter (1 pcs)
Front Panel
- 3 -
LEDs Status Description
Power
On The power is ready and it works
Off The power is off.
LAN
On LAN port is successfully connected.
Blink Sending / receiving data
Off No Ethernet connection
WAN
On WAN port is successfully connected
Blink Sending / receiving data
Off No Modem Connection
WiFi
On Radio switch is turned on
Blink Sending / receiving data
Off Radio switch is shut off.
3G
On
The 3G service is ready.
Blink
Trying to link the 3G network.
Off
The 3G service is not established.
Rear Panel
- 4 -
Instruction of the ports on the rear panel:
Button/port
Description
LAN
LAN Port. Connect LAN systems with RJ-45 cable.
WAN
WAN Port. Connect DSL or Cable modem.
SIM Card
SIM card port.
Power
Turning on/off the router power.
Reset
Reset configurations to default. Press the button and hold for
5 seconds.
DC(+9V)
Power jack. Connect with AC power adapter.
Installation
Before router’s set-up, please correctly link according to following
steps. In order to achieve product’s wireless functions, please put
the router in the middle of covered area.
Note: The following setup all based on priority setting. You can also
connect to the router via wireless using the wireless client software
utility.
Loading...