K&h EZ Mount Penthouse User Manual

EZ Mount Penthouse™

Instructions

Thank you for purchasing K&H Manufacturing’s EZ Mount Penthouse™. When used correctly your

EZ Mount Penthouse™ should provide years of hassle-free comfort and window viewing for your cat.

www.khmfg.com | [phone]

Made in China

K&H Manufacturing, LLC

Colorado Springs, CO

Putting Together Your EZ Mount Penthouse™

Remove Penthouse from the box and lay it out to become familiar with the unit. There are 6 suction cups included.

1

Two are located on the bottom of the Penthouse, 2 on the top (fl eece roof), and 2 on the straps.

Thoroughly clean your window and all suction cups for proper and sturdy adhesion.

2

Line up the bottom suction cups and press

3

fi rmly against the window.

Line up the top suction cups and press fi rmly

4

against the window.

Make sure your unit is level and straight. You

5

can adjust the suction cups by peeling them

off and pressing fi rmly back on the window.

Once the unit is positioned correctly on the

6

window, pull the straps up and push the

suction cups fi rmly against the window.

Caution: As with any suction cup, debris, temperature changes, sunshine and excessive use can
weaken the holding power. We recommend removing the suction cups at least once per month to
clean the window area, clean the suction cups and then re-install them for optimal strength.

REV0_04-03-17