How it Works
Keystone
Loading...
K
L
M
Loading...
Loading...
KSTAP12B
Owner's Manual
44 pgs11.07 Mb0

Keystone KSTAP12B, KSTAP14B Owner's Manual

Download
Page 1
Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventative care on your part can save you a great deal of time and money over the life of your air conditioner. Before operating this product, please read the instructions carefully and save this manual for future use.
Model: KSTAP12B KSTAP14B
Page 2
Page 3
Page 4
Page 5
Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner. You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
Read This Manual
CAUTION
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play the appliance. Cleaning and user maintenance shall not be made by children without supervision. ( be applicable for the European Countries )
This appliance is not intended for use by persons (including children) with reduced
physical ,sensory or mental capabilities or
the authorised service technician for repair or maintenance of this unit.
Contact the authorised installer for installation of this unit.
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. (be applicable for other countries except the European Countries ) Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
The appliance shall be installed in accordance with national wiring regulations.
Do not operate your air conditioner in a wet room such as a bathroom or laundry room. The appliance with electric heater shall have at least 1 meter space to the combustible materials. Contact
!
Page 6
CONTENTS
SOCIABLE REMARK
Sociable remark...................................................... ............................................................................2
1
SAFETY PRECAUTIONS
Safety rules ..................................................................................................................... ..................3
Operating condition .................. .................................................................... ......... ............................3
Electrical information .........................................................................................................................4
Accessories .......................................................................................................................................4
Names of parts................................................................................................................. ..................5
Electronic control operating instructions ...........................................................................................6
Operating instructions ..................................................................................................... ..................7
Location ................ ............................................................................................................................9
Window kit installation ......................................................................................................................9
Exhaust hose installation ................................................................................................................12
Water drainage ......................................................................... .......................................................13
Care and maintenance ....................... .............................................................................................14
Trouble shooting ..............................................................................................................................15
AIR CONDITIONER FEATURES
CARE AND MAINTENANCE
TROUBLESHOOTING TIPS
OPERATING INSTRUCTIONS
INSTALLATION INSTRUCTIONS
IDENTIFICATION OF PARTS
The rating data indicated on the energy label is based on the testing condition of installing the un-extended air exhaust duct without adaptor A & B (The duct and the adaptor A & B are listed in the accessories chart of the Instruction Manual). See the right figure.
NOT E
Page 7
SOCIABLE REMARK
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
It is prohibited to dispose of this appliance in domestic household waste. For disposal, there are several possibilities: A) The municipality has established collection systems, where electronic waste can be
disposed of at least free of charge to the user.
B) When buying a new product, the retailer will take back the old product at least free
of charge.
C) The manufacture will take back the old appliance for disposal at least free of charge
to the user.
D) As old products contain valuable resources, they can be sold to scrap metal dealers.
Wild disposal of waste in forests and landscapes endangers your health when hazardous substances leak into the ground-water and find their way into the food chain.
2
When using this air conditioner in the European countries, the following informa­tion must be followed:
CAUTION:
This applia nce is not in tended for use by persons (including children) with reduced physical,sensory or mental capabilities, or lack of experience and knowledge, unless they have been give n super vision or instruction concerning use of the appliance by a person responsible for their safety. Children sh ould be supervised to ensure that they do not play with the appliance.
Page 8
3
To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage.
Your air conditioner should be used in such a way
that it is protected from moisture. e.g. condensation, splashed water, etc. Do not place or store your air conditioner where it can fall or be pulled into water or any other liquid. Unplug immediately. Always transport your air conditioner in a vertical position and stand on a stable, level surface during use. Turn off the product when not in use. Always contact a qualified person to carry out repairs. If the supply cord is damaged it must be repaired by a qualified repairer. Keep an air path of at least 30cm all around the unit from walls, furniture and curtains. If the air conditioner is knocked over during use, turn off the unit and unplug from the mains supply immediately.
SAFETY PRECAUTIONS
!
Always do this
Do not operate your air conditioner in a wet room such as a bathroom or laundry room. Do not touch the unit with wet or damp hands or when barefoot. Do not press the buttons on the control panel with anything other than your fingers. Do not remove any fixed covers. Never use this appliance if it is not working properly, or if it has been dropped or damaged. Never use the plug to start and stop the unit. Always use the switch on the control panel. Do not cover or obsturct the inlet or outlet grilles. Do not use hazardous chemicals to clean or come into contact with the unit. Do not use the unit in the presence of inflammable substances or vapour such as alcohol, insecticides, petrol,etc. Do not allow children to operate the unit unsupervised. Do not use this product for functions other than those described in this instruction manual.
Never do this
Energy Save
Use the unit in the recommended room size. Locate the unit where furniture cannot obstruct the air flow. Keep blinds/curtains closed during the sunniest part of the day. Keep the filters clean. Keep doors and windows closed to keep cool air in and warm air out.
The air conditioner must be operated within the temperature range indicated below:
Operating con d ition
Sa fety r ules
Suggested tools for window kit installation
1. Scre wdriver(me di u m s iz e P hillips )
2. Tap e mea sure o r rul er
3. Knife or sc issors
4. Saw(In the event tha t t he window k it ne e ds to be cut down in size be cause th e win d ow is too na rrow for di rect insta lla tion )
MODE ROOM TEMPERATURE
COOL
DRY
17 C(62 F)~35
O O O O
C(95 F)
13 C(55 F)~35
O O O O
C(95 F)
HEAT(heat pump type)
5 C(41 F)~
O O
30 C(88 F)
O O
HEAT(electrical heat type)
<30 C/88 F
O O
Page 9
4
Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate, which is located on the side of the cabinet and behind the grille. Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards. Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle. Ensure the receptacle is accessible after the unit installation.
WARNING
For your s afety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.
WARNING
Elec trical Infor mation
IDENTIFICATION OF PARTS
Accessories
Check all the accessories are included in the package and please refer to the installation instructions for their usage.
PARTS :
PARTS NAME :
Exhaust hose and Apaptor and Adaptor B
(flat mouth or round mouth :depending on models)
I
Wall Exhaust Adaptor A( )
Adaptor B(round mouth)( )
Expansion Plug and wooden screw( )
QUANTITY :
1 set
1 pc
1 pc
4/ pc
Window Slider Kit and bolt
Foam seal
3/pc
NOTE: Opti o na l p a rt s( ), s ome mo dels without.
or
Remote Controller and Battery
(For remote control models only)
1pc
Drain hose and drain hose adaptor( )
1pc
All the illustr a tions in this m an u al are f o r ex p l anation pu rpose only. Your air conditioner may be s light ly di fferent. Th e ac tual shape s hall prevail .
NO TE:
Page 10
IDENTIFICATION OF PARTS
5
NAMES OF PARTS
Front
Rear
Operation panel
Horizontal louver blade (swing automatically)
Caster
Carrying handle (both sides)
3
1
2
3
4
6
7
8
9
10
11
Upper air intake
12
Fig . 1
13
1
2
4
Fig.2
5
7
9
8
15
14
13
12
5
Upper air filter
(Behind the grille)
6
10
11
Air outlet
Drain outle t ( only for Pu mp heati n g mo del)
Po wer cord o ut let
Po wer cord b uc kle (Used only when storing the unit )
Bo tto m tr ay d rain ou tlet
Po wer plug s oc ket ( Use only when storing the unit )
Lower air filter
(Behind the grille)
14
Lower air intake
15
Drain outle t
Page 11
6
AIR CONDITIONER FEATURES
Bef or e you begin , t horoughly familiariz e yo urself with the control pan el a nd re m ote c o ntrolle r and all it s fun c tions, then follo w the s ymbo l for the functions you de sire.
The unit can be co ntrolled by the u n it co ntrol panel alone or wi t h th e remo t e co n t roller .
ELEC TRON I C CO NTROL OPER ATING IN S TRU C TIONS
Fig.3
NOTE : Thi s manu al doe s not incl ude Re mote Contr oll er Op erations, see the << Remote Cont roller Instruction > > pac ked wi th t he unit for details .
OPERATION PANEL OF THE AIR CONDITIONER
Used to initiate the SLEEP/ECO operation.
SLEEP/ECO button
Control the fan speed. Press to select the fan speed in four steps-LOW, MED, HI and AUTO. The fan speed indicator light illuminates under different fan settings except AUTO speed. When select AUTO fan speed, all the fan indicator lights
turn dark. NOTE: Press this button for 3 seconds to initiate ION feature.The ion generator is energized and will
help to remove pollen and impur ities from the air, and trap them in the filter. Press it for 3 seconds again to stop the ION feature.
FAN/ION button
(Op t ional)
(Optional)
(ION is Optional)
Selects the appropriate operating mode. Each time you press the button, a mode is selected in a sequence that goes from AUTO, COOL, DRY, FAN and HEAT(cooling only models without). The mode indicator light illuminates under the different mode settings.
MODE select button
Power switch on/off.
POWER button
TIMER button
Used to initiate the AUTO ON start time and AUTO OFF stop time program, in conjuction with the & buttons. The timer on/off indicator light illuminates under the timer on/off settings.
+
-
SWING button
(Applicable to the models with auto swing feature only)
Used to initia te th e Au to swing feat ure. When th e operati on is ON , pre ss the SW ING button ca n stop the lo uver at the desi re d a ngle.
(ION is optional)
Sho ws the set te mperatu re in CO" "
" "orF and the Aut o-time r sett ings.
Whi le on DRY and FAN modes, it shows the ro om t e mpe rat ure.
O
LED Display
NOTE: On some models SLEEP button is instead of ECO button.
Used to adjust (increasing/decreasing) temperaturesettings in1 C/2 F(or 1 F) increments in a range of 17 C/62 F to 30 C/88 F (or 86 F) or the TIMER setting in a range of 0~24hrs.
UP( ) and DOWN( ) button
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other, press and hold the Up and Down buttons at the same
time, for 3 seconds.
+
-
Page 12
7
OPERATING INSTRUCTIONS
Operating Instructions
- Press the "MODE" button until the "COOL" indicator light comes on.
- Press the ADJUST buttons "+" or " - " to select your desired room temperature. The temperature can be set within a range of 17 C-30 C/62 F-88 F (or 86 F).
- Press the "FAN SPEED" button to choose the fan speed.
O O O O O
- Press the "MODE" button until the "DRY" indicator light comes on.
- Under this mode, you cannot select a fan speed or adjust the temperature. The fan motor operates at LOW speed.
- Keep windows and doors closed for the best dehumidifying effect.
- Do not put the duct to window.
COOL operation
- Press the "MODE" button until the "FAN " indicator light comes on.
- Press the "FAN SPEED" button to
choose the fan speed. The temperature cannot be adjusted.
- Do not put the duct to window.
FAN operation
TIMER operation
- Press the "MODE" button until the "HEAT" indicator light comes on.
- Press the ADJUST buttons "+" or " - " to select your desired room temperature. The temperature can be set within a range of 17 C-30 C/62 F-88 F (or 86 F).
- Press the "FAN SPEED" button to choose the fan speed. For some models, the fan speed can not be adjusted under HEAT mode.
O O O O O
HEAT operation(cooling only models without)
AUTO operation
- When you set the air conditioner in AUTO mode, it will automatically select cooling, heating(cooling only models without), or fan only operation depending on what temperature you have selected and the room temperature.
- The air conditioner will control room temperature automatically round the temperature point set by you.
- Under AUTO mode, you can not
select the fan speed.
FOLLOW ME/TEMP SENSING feature(optional)
To act iv ate the F o llow Me/Temp Se nsing featu re, point the remote control t o wa rd s the unit and pres s the Follow Me/Temp Sens i ng b utton. T
If th e un i t does not r e c eive the Follow Me/ Temp S ensing sig n al during any 7 minut es in t erv al, the u nit will beep to ind i c ate the Follow Me/Temp Sens ing m o de has ende d .
he remote disp l ay is actu al te m perature at its locatio n. The remo t e co ntrol will sen d thi s signa l to the air co nditioner every 3 minutes int e rv al unt il p re ss t he F o llow Me/Tem p Sensin g but to n aga in.
NOTE:This fea ture can be act ivated fr o m the rem ote con tro l ON LY. The r em ote c on trol ser v es a s a rem ote the r mo stat allo win g fo r th e pre c is e tem pe r atu re c ontrol at its loc a ti o n .
- Wh e n the u nit is on, press the Tim er button will initiate the Au to- off
stop prog ram, the TIMER OFF indic ator ligh t ill u min ates. Press the UP or down button to sel ect th e des ired ti me. P res s the TIMER b utton again with i n 5 seco nd s , the Auto-o n sta rt progr am is in it iated. And th e TIM ER ON indicator light illumi n ate s. Pr ess the up or down button to selec t the desir ed Auto -on s tart t ime.
-
- Press or h o ld the UP or D OWN butt o n to ch a nge t he Auto time by
0.5 hour increme nts, up to 10 hou rs, then at 1 hour incremen ts up to 24 hours . Th e cont rol w i ll count down the tim e remain i ng un til st art.
- The system will automat ically rever t back to display th e prev iou s temper­atur e setting if there is no operation in a five seconds perio d .
When the unit is off, pre ss the Timer butt o n to initiate the Auto-on start progr am,pres s it aga in within five secon ds will initiate the Au to-o ff stop progr am.
Error cod es and p rotection code: E1-
E2-
E3-
E4-
P1-
Ro om te mperature sens o r error­Un plug t he un it and plug i t ba ck in. If erro r r epeats, call for se r vi ce. Evapo ra tor temperature s e nso r err or­Un plug t he un it and plug i t ba ck in. If erro r r epeats, call for se r vi ce. Co ndenser temperature se ns or error­Un plug t he un it and plug i t ba ck in. If error rep eats , ca ll for serv ice (o n so m e mod els).
er r or­Un plug t he un it and plug i t ba ck in. If erro r r epeats, call for se r vi ce. Bot to m tray is full - Connect the dr a in ho se an d dra in th e c o llect ed wa ter a way. If pro tectio n r e peats, call fo r service.
Di splay panel communicati on
Page 13
8
OPERATING INSTRUCTIONS
Fig .4
Other features
After t he unit h as stopped, it can not be restar ted opera tion i n the firs t 3 minutes. Thi s is to prote ct th e unit. Operation will automatica lly star t aft e r 3 minut es.
Wait 3 minutes before resuming operation
If the unit breaks off un expecte dly due to th e power c ut,i t will rest art with th e previous function se tti ng automat icall y when the power r esum es.
Auto-Restart(on some models)
- Turn i ng th e unit ON or OFF at any time or ad justi n g the t imer s etting to 0 .0 will cancel the Auto S tart/ Stop timer progra m.
- Wh e n the mal fu nctio n (E1, E 2, E3 or E 4) occurs, the Auto Star t /Stop timed prog ram w i ll also be c ancelle d.
Th e lou ver can be ad just ed automatica lly .
When the Pow e r is ON , the louv e r opens full y. Press the SWING butto n on the panel or remote co ntroller to initiate the Auto swi n g featu re. The louve r wi l ll sw i ng up and do wn autom atic all y. Pleas e do not adju st th e lou ver manua ll y.
Adjust th e air flow dir ecti on autom ati cally (Fig. 4):
Air flow direction adjustment
Swing aut omatical l y
SLEEP/ECO operation
Press this button, the selected temperature will increase(cooling) or decrease(heating) by
1 30 minutes.The temperature will then increase (cooling) or decrease (heating) by another 1 after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the Sleep/Eco mode and the unit will continue to operate as originally programmed.
This feature is unavailabe under FAN or
DRY mode.
O O O
O O O
C/2 F(or 1 F)
C/2 F(or 1 F)
NOTE:
Page 14
INSTALLATION INSTRUCTIONS
Ho riz on tal win dow
Win do w Sl ide r Ki t Min im um:67 .5 cm( 2. 22 ft) . Ma xmu m:1 23cm( 4.04f t).
Hor izo ntal win dow
Fig.6
Fig.7
Fig.5
Locatio n
The air conditioner should be placed on a firm foundation to minimize noise and virbration. For safe and secure positioning, place the unit on a smooth, level floor strong enough to support the unit. The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects. The unit must be placed within reach of a properly rated grounded socket. Never place any obstacles around the air inlet or outlet of the unit. Allow 30cm to 100cm of space from the wall with for efficient air-conditioning.
Your window slider kit has been designed to fit most standard Vertical and horizontal window applications, However, it may be necessary for you to improvise/modify some aspects of the installation procedures for certain types of window. Please refer to Fig. 6& Fig.7 for minimum and maximum window openings.Window slider kit can be fixed with a bolt (see Fig.7a).
" " " "
Window slider kit Installation
If the window opening is less than the mentioned minimum length of the window slider kit, cut that one with a hole in it short to fit for the window opening. Do never cut out the hole in window slider kit.
Note:
INSTALLATION INSTRUCTIONS(optional)
9
bo lt
Win do w sl ide r ki t
Fig.7a
A: 30c m-100c m B: 30c m≥
Win do w Sl ide r Ki t Min im um:67 .5 cm( 2. 22 ft) . Ma xmu m:1 23cm( 4.04f t).
Page 15
INSTALLATION INSTRUCTIONS(optional)
10
Installation in a double-hung sash
window
1. Cut the foam seal(adhesive type) to the proper length and attach it to the window stool. Fig.8
2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window, shorten the adjustable window kit if the width of window is less than 26.5 inches Open the window sash and place the window slider kit on the window stool. Fig.9
3. Cut the foam seal(adhesive type) to the proper length and attach it on the top of the window. Shown as in Fig.10
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the
open gap between the top window sash and outer window sash. Shown as in Fig.11.
Foam seal A (adhesive type)
Foam seal
Fi g. 8
Fi g. 9
Fi g. 10
Fi g. 11
Window kit
Window stool
Window kit
Window stool
26.5 ~ 48.0
Page 16
INSTALLATION INSTRUCTIONS(optional)
11
Installation in a sliding sash window
1. Cut the foam seal(adhesive type) to the proper length and attach it to the window frame. See Fig.12.
2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window, shorten the adjustable window kit if the width of window is less than 26.5 inches. Open the window sash and place the window slider kit on the window stool. See Fig.13.
3. Cut the foam seal(adhesive type) to the proper length and attach it on the top of the window. Shown as in Fig.14.
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and sea the
open gap between the top window sash and outer window sash. Shown as in Fig.15.
Foam seal
Foam seal A (adhesive type)
Fi g .12
Fi g .13
Fi g .14
Fi g .15
Window panel
NOTE:All the illustrations in this manual are for explanation
purpose only.Your unit may be slightly different. The actual shape shall prevail.
26.5 ~ 48.0
Page 17
INSTALLATION INSTRUCTIONS
Exhaust hose installation:
The exhaust hose and adaptor must be installed or removed in accordance with the usage mode.
Th e exh aust hose can be compres sed or ex tended
mo d er ately accord i ng to the insta llation requirement, but i t is desirable to keep the hose length to a mini mum .
1. Install the adaptor B and adaptor I onto the exhaust hose as
shown in Fig.16a or Fig.16b. Refer to the previous pages for window kit installation.
2. Resert the hook of the Exhaust hose into the hole seat of the
air outlet and slide down the Exhaust hose along the arrow direction (See Fig.17) for installation.
IMPORTANT:
DO NOT OVER BEND THE EXHAUST HOSE (SEE Fig.19)
12
Fig . 16a
Fig. 1 7
Fig . 19
(Not applicable to the units without adaptor A, expansion
plugs and wooden screws of Accessories )
1. Prepare a hole in the wall. Install the wall Exhaust adaptor A onto the wall(outside) by using 4 expansion plugs and wooden screws, be sure to fix thoroughly. (See Fig.18)
2. Attach the Exhaust hose to wall Exhaust adaptor A.
The exhaust hose can be installed into the wall
.
Fig . 18
max 120CM
min 30CM
Adaptor A
Expansion plug position
Adaptor cap
Note:
Cover the hole using the adaptor cap when not in use.
Fi g .16b
COOL,HEAT(heat pump type) or AUTO mode
FAN,DEHUMIDIIFY or HEAT(electrical heat type) mode
Install
Remove
CAUTION:
Make sure that there is no obstacle around the air outlet of the exhaust hose (in the range of 500mm) in order to the exhaust system works properly.
Hole seat
Hook
Page 18
INSTALLATION INSTRUCTIONS
Water drainage:
- During dehumidifying modes, remove the upper
drain plug from the back of the unit, install the drain
connector(5/8 universal female mender) with
3 4 hose(locally purchased). For the models
without drain connector, just attach the drain
hose to the hole. Place the open end of the
hose adaptor directly over the drain area in your
basement floor. Please refer to Fig.20a.
- During heating pump mode, remove the lower drain
plug from the back of the unit, install the drain
connector(5/8 universal female mender) with
3/4 hose(locally purchased). For the models
without drain connector, just attach the drain
hose to the hole. Place the open end of the
hose adaptor directly over the drain area in your
basement floor. Please refer to Fig.20b.
- When the water level of the bottom tray reaches
a predetermined level,
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away(Fig.22). Reinstall the bottom
drain plug and restart the machine until the P1
symbol disappears. If the error repeats, call for
service.
" "
the unit beeps 8 times,
the digital display area shows P1 . At this time
the air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate(this is normal).
" "
Remove the uppe r drain plug
Contin u ou s drai n hose
Fi g. 20a
Fi g. 20b
13
Fi g. 22
NOTE: Be sure to reinstall the bottom drain plug
before using the unit.
Rem ove th e lower dra in pl ug
Contin u ous dra i n hose
dr ain h os e adapt or
dr ai n hos e ada ptor
NOTE: Make sure the hose is secure so there are
no leaks.Direct the hose toward the drain,making
sure that there are no kinks that will stop the warter
flowing.Place the end of the hose into the drain and
make sure the end of the hose is down to let the
water flow smoothly.(See Fig.20a,20b,21a).Do
never let it up.(See Fig.21b).
Fig . 21 a Fig . 21b
√
×
√
√
Page 19
CARE AND MAINTENANCE
CARE AND MAINTENANCE
1) Be sure to unplug the unit before cleaning or servicing.
2) Do not use gasoline, thinner or other chemicals to clean the unit.
3) Do not wash the unit directly under a tap or using a hose. It may cause electrical danger.
4) If the power cord is damaged, it should be repaired by manufacture or its agency.
IMPORTANT:
1. Air filter
2. Unit enclosure
- Use a lint-free cloth soaked with neutral detergent to clean the unit enclosure. Finished by a dry clean cloth.
Fig.23
3. Unit idle for a long time
14
- Remove the rubber plug at the back of the unit and attach a hose to drain outlet
(See Fig.20 & 21).
- Remove the plug from the bottom drain outlet, all the water
in the bottom tray would drain out (See Fig.22).
- Keep the appliance running on FAN mode for half a day in a warm room to dry the appliance inside and prevent mold forming.
- Stop the appliance and unplug it, wrapped the cord and bundle it with the tape(Fig.25). Remove the batteries from the remote controller.
- Clean the air filter and reinstall it.
. Place the open end of the hose
directly over the drain area in your basement floor
Fi g .24
Fig.25
Buckle
Power cord
Upper filter (take out )
Rem ove the scre w ,then take the l owe r fil ter out.
Upper filte r (in stall)
In st all t he lo wer filter by using th e screw.
- Clean the air filter at least once every two weeks to prevent inferior fan operation because of dust.
­This unit has two filters. Take the upper filter out along the the arrow direction (Fig.23),then take the filter down. Remove the lower filter by loosening the screw, taking out the filter as shown in Fig.23.
­Wash the air filter by immersing it gently in warm water (about 40 C/104 F) with a neutral detergent. Rinse the filter and dry it in a shady place.
-
Install the upper air filter after cleaning , and install the lower filter by using the screw (see Fig.24).
Removal
Cleaning
Mounting
O O
Power plug socket
Power plug
Page 20
TROUBLESHOOTING TIPS
TROUBLE SHOOTING
1. Unit does not
Start when
Pressing on/off
Button
- P1 appears in the display window
Drain the water in the bottom tray.
TROUBLES
POSSIBLE CAUSES
SUGGEST REMEDIES
Reset the temperature.
Make sure all the windows and
doors are closed.
Remove the heat sources if possible.
Connect the duct and make
sure it can function properly.
Decrease the set temperature.
Clean the air filter.
- Room temperature is lower than
the set temperature.(Cooling mode)
- The windows or doors in the room
are not closed.
- There are heat sources inside the
room.
- Exhaust air duct is not connected or
blocked.
- Temperature setting is too high.
- Air filter is blocked by dust.
2. Not cool enough
Place the unit on a flat, level
ground if possible.
It is normal.
- The ground is not level or not flat
enough.
- The sound comes from the flowing
of the refrigerant inside the
air-conditioner.
4. Noisy or vibration
5. Gurgling sound
15
Switch on again after the unit has cool down.
- T he au tom at i c ov er hea t protect ion func tion. Whe n the tempe ratur e at the air ou tlet excee d 70 C/ 158 F,the device
wi ll stop .
O O
6. Power shut off at
Heating mode
Page 21
1-866-646-4332
ONE
One
2
ND
Second through fifth
AIR CONDITIONER WARRANTY
16
Page 22
The design and specifications are s u bject to change with out prior notice for product im proveme nt. Consul t wi t h the sales agency or man u facturer for details.
Page 23
En este manual usted puede encontrar muchas indicaciones útiles sobre cómo usar y mantener su aire acondicionado de manera correcta. Únicamente algunos cuiddados preventativos en su máquina puede ahorrarle mucho tiempo y dinero durante la vida de su aire acondicionado. Antes del uso de este producto, por favor lea las instrucciones con cuidadosamente y guarde este manual para el uso en el futuro.
AIRE ACONDICIONADO PORTATIL
Model: KSTAP12B KSTAP14B
Page 24
Page 25
Page 26
1
Page 27
2
Page 28
3
Page 29
4
Page 30
5
Page 31
6
Page 32
7
Page 33
8
Page 34
9
Page 35
10
Page 36
11
Page 37
12
Page 38
13
Page 39
14
Page 40
15
Page 41
Page 42
1-866-646-4332.
17
Page 43
Page 44
El diseño y especificación se publican sin previo aviso de las mejoras del producto. Consulte a la agencia de ventas o el fabricante sobre más informaciones.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use