Congure Your Keysight N9320A RF Spectrum Analyzer
The Keysight Technologies, Inc. N9320B is a general purpose
spectrum analyzer from 9 kHz to 3 GHz. Its standard features
include:
– Frequency power measurements
– One-button power suite, auto tune, and frequency counter
– AM/FM tune and listen
– 12 markers, 4 traces, and 2 customer-denable limit lines
– U2000 Series USB power sensor support
– USB and LAN connectivity
This step-by-step process will help you to congure your
N9320B RF spectrum analyzer by tailoring its options to meet
your requirements.
For detailed specications, refer to the N9320B spectrum analyzer
data sheet (5990-8119EN). For a product overview, refer to the
N9320B spectrum analyzer brochure (5990-8118EN).
Ordering information
DescriptionModel numberAdditional information
RF spectrum analyzer, 9 kHz to 3.0 GHzN9320BAccessories supplied as standard with each analyzer: Quick Start Guide,
USB cable, N-BNC adapter, BNC cable, power cord, and documentation
CD-ROM
DescriptionOption numberAdditional information
Step 1. Add a preamplier
Preamplier, 3.0 GHzN9320B-PA3Preamplier improves the noise oor for low-level signal detection
Step 2. Add modulation analysis capability
AM and FM demodulation metricsN9320B-AMAProvides modulation metrics of an AM or FM signal: Carrier power,
modulation rate, AM depth, frequency deviation, SINAD1, and carrier
frequency offset
ASK and FSK demodulation metricsN9320B-DMAProvides modulation metrics of an ASK or FSK signal: Carrier power,
ASK error, depth, and index, FSK deviation, FSK error, magnitude error,
and carrier frequency of fset
Congure Your Keysight N9320A RF Spectrum Analyzer
DescriptionOption numberAdditional information
Step 5. Add optional accessories
RF training kitN9320B-TR1Consists of RF transceiver and a full set of pre-written courseware.
Prepared for RF teaching labs or training agencies
Hard transit case (D x W x H)N9320B-1TC – 645 x 444 x 268 mm, 13 kg nominal
– 25.4 x 17.5 x 10.6 in, 29 lb nominal
Rack mount kitN9320B-1CMIncludes a rackmount ange and front handle kit. Fits standard 19-inch rack
and occupies three units of rack space
Handle and bumperN9320B-1HBAvailable for ordering only at time of initial instrument purchase
Need more RF and microwave accessories? Visit www.keysight.com/nd/accessories
Step 6. Choose localized User’s Guide
English User’s GuideN9320B-ABA
Simplied Chinese User’s Guide
Japanese User’s GuideN9320B-ABJ
Step 7. Add calibration, technical training, support, and upgrade
Commercial calibration certicate with test dataN9320B-UK6Calibration certicate only available at time of instrument purchase; only
Select Keysight Calibration Plan
3-year calibration assurance plan
(return to Keysight)
5-year calibration assurance plan
(return to Keysight)
Other calibration options may available, for more information on calibration, go to: www.keysight.com/nd/calibration.
For more information on training and application support services, go to: www.keysight.com/nd/training.
N9320B-AB2
provides measurement results
R-50C-011-3Priority calibration service covering all calibration costs for
3 years; 15% cheaper than buying stand-alone calibrations
R-50C-011-5Priority calibration service covering all calibration costs for
5 years; 20% cheaper than buying stand-alone calibrations
Most of the Keysight N9320B RF spectrum analyzer options are
available for post-sales retrot.
For license-key upgrades that do not require additional hardware:
1. Place an order for the upgrade with Keysight and request
to receive the software entitlement certicate through
email
2. Install the license key in the N9320B. Upgrade rmware to
the latest revision if required
3. Restart the N9320B
4. Begin using the new capability
DescriptionUpgrade numberAdditional information
Add preamplier, 3.0 GHzN9320BK-PA3
Add AM/FM demodulation metricsN9320BK-AMA
Add ASK/FSK demodulation metricsN9320BK-DMA
Add tracking generator, 100 kHz to 3.0 GHzN9320BK-TG3The tracking generator is additional hardware that is installed inside the
N9320B. Upgrade is performed at Keysight’s local service center
Add GPIB interfaceN9320BK-G01Requires additional hardware be installed inside the N9320B
Add EMC lter (-6 dB down)N9320BK-EMF
Add RF training kitN9320BK-TR1
Add hard transit caseN9320BK-1TC
Add rack mount kitN932 0BK-1C M
Add customized save-last utilityN9320BK-C20
Add instrument power-on utility at AC power cycleN9320BK-C30Upgrade performed at Keysight’s local service center
Revision to currentN9320BK-R2CEnables the latest feature set for the instrument
A comprehensive summary about the N9320B upgrades is also available at:
www.keysight.com/nd/n9320b_upgrade.
Related Literature
Publication numberPublication title
59 90-8116ENKeysight N9310A RF Signal Generator, Data Sheet
Other Information
Keysight product registration
Register your instruments for service notications, rmware
update alerts, application notes and more. You have the
Keysight edge. Register today and keep it sharp:
www.keysight.com/nd/register.
Keysight education corner
Your one-stop education resource for college and university
engineering educators, researchers and students:
www.keysight.com/nd/edu.