Keysight Technologies EPM Series, N1913A, EPM-P Series, E-Series, N1914A Configuration Manual
...
Keysight Technologies
EPM and EPM-P Series Power Meters
E-Series Power Sensors
Configuration Guide
Introduction
This configuration guide describes the standard configurations, options, and compatible accessories of
EPM Series and EPM-P Series power meters. For full specifications, see EPM Series Power Meters E-Series
and 8480 Series Power Sensors - Data Sheet (Keysight literature number 5965-6382E) or E4 416A /E4417A
EPM-P Series Power Meters and E-Series E9320 Peak and Average Power Sensors – Data Sheet (Keysight
literature number 5980-1469E). Contact your local Keysight Technologies, Inc. representative at the offices
listed on the back of this guide if you need more information.
EPM Series power meters
– N1913A power meter (single channel)
– N1914A power meter (dual channel)
EPM-P Series power meters
– E4416A power meter (single channel)
– E4417A power meter (dual channel)
E-Series power sensors
– E441xA CW power sensors (10 MHz to 26.5 GHz, sensor dependent)
– E9300 average power sensors (9 kHz to 18 GHz, sensor dependent)
– E9320 peak and average power sensors (50 MHz to 18 GHz, sensor dependent)
03 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
EPM-P Series Power Meters
The EPM-P Series power meters provide peak, peak-to-average ratio, average, and time-gated
power measurements. For peak, peak-to-average ratio, and time-gated measurements, the
EPM-P Series power meters must operate with the E-Series E9320 power sensors. For average
power measurements only, the EPM-P Series power meters are compatible with all the 8480
Series power sensors, the E-Series CW, the E-Series E9300 average power sensors, and the
E-Series E9320 power sensors.
The standard E4416A and E4417A power meters include:
– Single-channel power meter, order E4416A or dual-channel power meter, order E4417A
– Input sensor connector(s) on the front panel
– Reference calibrator connector on the front panel
– Power sensor cable, 1.5 m (5 ft). (One per E4416A, two per E4417A)
– Libraries Media Suite CD-ROM
– Documentation CD-ROM
– Power cord (plug matches destination requirements)
EPM Series Power Meters
The EPM Series power meters provide average power measurements.
The standard N1913A and N1914A power meters include:
– Single-channel power meter, order N1913A or dual-channel power meter, order N1914A
– Input sensor connector(s) on the front panel
– Reference calibrator connector on the front panel
– Power sensor cable, 1.5 m (5 ft) (One per N1913A, two per N1914A)
– USB cable Type A to Mini-B, 6 ft
– Documentation CD-ROM
– Keysight Instrument Control DVD
– IO Libraries Suite
– Command Expert
– BenchVue Software Platform
– 30-day free trial of BenchVue Power Meter/Sensor Control and Analysis app
– Standard Calibration of Certificate
– Power cord (plug matches destination requirements)
04 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
E-Series Power Sensors
The standard E4412A and E4413A CW power sensors include:
– Power sensor 10 MHz to 18 GHz, order E4412A, or power sensor 50 MHz to 26.5 GHz, order
E4 413A
– English-language Operating and Service Guide
The standard E9300 average power sensors include:
+20 to –60 dBm:
– Power sensor 10 MHz to 18 GHz, order E9300A
– Power sensor 10 MHz to 6 GHz, order E9301A
– Power sensor 9 kHz to 6 GHz, order E9304A
+30 to –50 dBm:
– Power sensor 10 MHz to 18 GHz, order E9300H
– Power sensor 10 MHz to 6 GHz, order E9301H
+44 to –30 dBm:
– Power sensor 10 MHz to 18 GHz, order E9300B
– Power sensor 10 MHz to 6 GHz, order E9301B
– English-language Operating and Service Guide (part number E9300-90009)
The standard E9320 peak and average power sensors include:
– Power sensor, 50 MHz to 6 GHz, 300 kHz bandwidth, order E9321A
– Power sensor, 50 MHz to 6 GHz, 1.5 MHz bandwidth, order E9322A
– Power sensor, 50 MHz to 6 GHz, 5 MHz bandwidth, order E9323A
– Power sensor, 50 MHz to 18 GHz, 300 kHz bandwidth, order E9325A
– Power sensor, 50 MHz to 18 GHz, 1.5 MHz bandwidth, order E9326A
– Power sensor, 50 MHz to 18 GHz, 5 MHz bandwidth, order E9327A
– English-language Operating and Service Guide
Please refer to the N1913A/14A data sheet for more average power sensor selections.
05 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
Compatibility
Power sensor compatibility
For compatibility of power meters, power sensors, and power sensor cables, please refer to the
table below.
Power sensors Power meters Power sensor cables
EPM-P Series EPM Series 11730 (grey) E9288 (blue)
E441x family Yes Yes Yes Yes
E9300 family Yes Yes Yes Yes
E9320 family Yes No No Yes
8480 Series Yes Yes Yes Yes
N8480 Series Yes Yes Yes Yes
U8480, U2000 and
U2040 Series (except
U2049X and in Average
Mode only)
Firmware compatibility
Firmware upgrade information can be accessed from the World Wide Web, free of charge.
No Yes Not applicable Not applicable
Calibration Options
– E441xA/B-A6J - Supplies ANSI Z540 certificate of calibration with data.
– E441xA/B-1A7 - Supplies ISO 17025 certificate of calibration with data.
– N1913/ 4A-A6J - Supplies ANSI Z540 certificate of calibration with data.
– N1913/ 4A-1A7 - Supplies ISO 17025 certificate of calibration with data.
– E93xxA/B/H-A6J - Supplies ANSI Z540 certificate of calibration with data.
06 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
Hardware Options
The following options are available on the EPM and EPM-P Series power meters. All order
combinations have to be configured upon ordering; these options are not available for field
upgrade.
EPM Series power meter
Option Description
N19 13 / 4 A -0 0 4 Delete power sensor cable(s)
N1913/ 4A-101
N1913/ 4A-201 Single/dual-channel average power meter with VGA, trigger in/out, one front and one
N19 13 / 4 A - B0 1 Without battery (Mandatory for option 201)
N19 13 / 4 A - C 0 1 Front calibrator, front sensor (Need to order option 201)
N19 13 / 4 A - C 0 2 Front calibrator, parallel front and rear sensor (Need to order option 201)
N19 13 / 4 A - C 03 Rear calibrator, parallel front and rear sensor (Need to order option 201)
N1913A-200 436A and 437B code compatibility via GPIB interface only. 436A and 437B language
N1914A-200 438A code compatibility via GPIB interface only. 438A language mode is not
N19 13 / 4 A - 9 0 8 Rack mount kit (one instrument). Can be ordered as standalone.
N19 13 / 4 A - 9 0 9 Rack mount kit (two instruments). Can be ordered as standalone.
BV0007B BenchVue Power Meter/Sensor Control and Analysis app license
N6901A-1FP 436A and 437B code compatibility for N1913A. Post purchase upgrade only.
N6902A-1FP 438A code compatibility for N1914A. Post purchase upgrade only.
1
Single/dual-channel average power meter
rear USB ports
modes are not compatible with LAN or USBTM remote interface. For new N1913A
purchase.
compatible with LAN or USBTM remote interface. For new N1914A purchase.
1. Option 101 provides the front calibrator and the front sensor(s), and it can’t be ordered with any of the
options B0x/C0x.
EPM-P Series power meter
Option Description
E441x A /B- 002 Parallel rear panel sensor input connector(s) and front panel reference calibrator
connector
E441x A /B- 003 Parallel rear panel sensor input connector(s) and rear panel reference calibrator
connector
E441x A /B- 004 Delete power sensor cable(s)
E441x A /B-908 Rack mount kit (one instrument). Can be ordered as stand-alone.
E441x A /B-909 Rack mount kit (two instruments). Can be ordered as stand-alone.
07 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
Service and Support Options
Calibration
The following calibration options are available:
Option Description
R-50C-011-3 Calibration Assurance Plan - Return to Keysight - 3 years
R-50C-011-5 Calibration Assurance Plan - Return to Keysight - 5 years
R-50C-016-3 ISO 17025 compliant calibration plan, 3 years
R-50C-016-5 ISO 17025 compliant calibration plan, 5 years
R-50C-021-3 ANSI Z540-1-1994 calibration plan, 3 years
R-50C-021-5 ANSI Z540-1-1994 calibration plan, 5 years
1. Options are not available in all countries.
1
Special Options
Special options for EPM-P Series power meters, EPM Series power meters, and E-Series
sensors are available. The special options provide customized measurement capabilities to fit a
wider range of applications. Contact your local Keysight representative for more information.
Documentation
– The EPM power meters are supplied with a Product Reference CD-ROM which contains the
English-language User’s Guide, Service Guide, Programming Guide, Installation Guide, and
localized versions of the User’s Guide.
– The EPM-P power meters are supplied with a Product Reference CD-ROM which contains
the English-language User’s Guide, Service Guide, Programming Guide, Installation Guide,
and localized versions of the User’s Guide.
– In support of the environmentally-friendly initiative, all printed documents are purchasable
option. The following table shows the option numbers to order the documentation.
Documentation EPM-P series power meter EPM series power meter
User’s Guide and Installation Guide
(English)
Programming Guide E441x A-0BF N19 13 / 4 A- 0 B F
Service Guide E441x A-0B3 Not available
Delete manual set E441x A-0B0 N19 13 / 4 A -0 B 0
Add manual set, User’s Guide and
Programming Guide (English)
Printed User’s Guide in Japanese E441xA-ABJ N1913/4A-ABJ
Documentation E4412/3A E9300 E9320A
Add manual set E4412/3A-0B1 E930xx-0B1 E932xA-0B1
Printed User’s Guide in
Japanese
E4412/3A-ABJ E930xx-ABJ —
E441x A-0B1 N19 13 / 4 A -0 B 1
E441x A-0BK N1913 / 4 A - 0 B K
08 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
Available Accessories
E9288A-C power sensor cables (refer to the compatibility section):
– 1.5 meters (5 ft) E9288A
– 3 meters (10 ft) E9288B
– 10 meters (31 ft) E9288C
11730A-F power sensor cables (refer to the compatibility section):
– 1.5 meters (5 ft) 11730A
– 3 meters (10 ft) 11730B
– 6.1 meters (20 ft) 11730C
– 15.2 meters (50 f t) 11730D
– 30.5 meters (100 ft) 11730E
– 61 meters (200 ft) 11730F
Accessory pouch, 34161A
– Holds accessories supplied or ordered
Basic instrument transit case, 34131A
– Protects the power meter during transit
Soft carry/operating case, 34141A
– Power meter with battery option can be operated in soft carry case
Spare battery, N1913/ 4A-300
– Extra battery for EPM Series power meters with Option 102
Auxiliary Equipment
The 11683A range calibrator verifies the accuracy and linearity of the EPM-P and EPM Series
power meters. Outputs corresponding to the meter readings of 3, 10, 30, 100, and 300 μW and
1, 3, 10, 30, and 100 mW are provided. Calibration uncertainty is ±0.25% on all ranges.
Literature References
Publication title Publication number
EPM-P Series Single and Dual-Channel Power Meters E9320 Family of Peak and
Avera - Technical Overview
E4416A/E4417A EPM-P Series Power Meters and E-Series E9320 Peak and Average
Power Sensors – Data Sheet
Agilent EPM-P Series Single and Dual Channel Power Meters – Data Sheet 59 88-16 05EN
Choosing the Right Power Meter and Sensor - Application Note 59 6 8-7150 E
EPM Series Power Meters E-Series and 8480 Series Power Sensors - Data Sheet 5965-6382E
Agilent EPM Series Power Meters - Brochure 5965-6380E
Fundamentals of RF and Microwave Power Measurements - Application Note 5965-6630E
4 Steps for Making Better Power Measurements - Application Note 5965-8167E
Wide dynamic range. Multiple modulation formats. One sensor. - Technical Overview 5968-4960E
Seven Reasons to Migrate from an E4418/4419B to a Keysight N1913/1914A EPM
Series Power Meter - Migration Guide
5980-1471E
5980-14 6 9 E
5990-4016EN
09 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose
and semiconductor test. The business that became Keysight was a
founding member of the AXIe consortium. ATCA®, AdvancedTCA®,
and the ATCA logo are registered US trademarks of the PCI
Industrial Computer Manufacturers Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the
Web inside your test systems. The business that became Keysight
was a founding member of the LXI consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation
delivers a rugged, PC-based high-performance measurement and
automation system.
Download your next insight
Keysight software is downloadable
expertise. From first simulation through
first customer shipment, we deliver the
tools your team needs to accelerate from
data to information to actionable insight.
– Electronic design automation (EDA)
software
– Application software
– Programming environments
– Productivity software
Learn more at
www.keysight.com/find/software
Start with a 30-day free trial.
www.keysight.com/find/free_trials
10 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
Evolving Since 1939
Our unique combination of hardware, software, services, and people can help you
reach your next breakthrough. We are unlocking the future of technology.
From Hewlett-Packard to Agilent to Keysight.
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
http://www.keysight.com/find/emt_product_registration
Register your products to get up-to-date product information and
find warranty information.
Keysight Services
www.keysight.com/find/service
Keysight Services can help from acquisition to renewal across your
instrument’s lifecycle. Our comprehensive service offerings—onestop calibration, repair, asset management, technology refresh,
consulting, training and more—helps you improve product quality
and lower costs.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure
your instruments are operating to specification, so you can rely on
accurate measurements.
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and
product breadth, combined with channel partner convenience.
www.keysight.com/find/powermeters
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada (877) 894 4414
Brazil 55 11 3351 7010
Mexico 001 800 254 2440
United States (800) 829 4444
Asia Pacific
Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
India 1 800 11 2626
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan 0800 047 866
Other AP Countries (65) 6375 8100
Europe & Middle East
Austria 0800 001122
Belgium 0800 58580
Finland 0800 523252
France 0805 980333
Germany 0800 6270999
Ireland 1800 832700
Israel 1 809 343051
Italy 800 599100
Luxembourg +32 800 58580
Netherlands 0800 0233200
Russia 8800 5009286
Spain 800 000154
Sweden 0200 882255
Switzerland 0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
United Kingdom 0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-9-7-17)
DEKRA Certified
ISO9001 Quality Management System
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2010 - 2018
Published in USA, April 17, 2018
5990-4173EN
www.keysight.com
Loading...