Keysight Technologies Infiniium 9000 Series, MSO9064A, DSO9064A, MSO9254A, MSO9104A User Manual
...
Keysight Infiniium 9000 Series
Oscilloscopes
Distributed by:
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
User’s Guide
Notices
CAUTION
WARNING
© Keysight Technologies 2009, 2012, 2016,
2017
No part of this manual may be reproduced in
any form or by any means (including electronic storage and retrieval or translation
into a foreign language) without prior agreement and written consent from Keysight
Technologies as governed by United States
and international copyright laws.
Manual Part Number
54904-97020
Edition
Fifth Edition, January 2017
Available in electronic format only
Published by:
Keysight Technologies
1900 Garden of the Gods Rd.
Colorado Springs, CO 80907 USA
Warranty
The material contained in this document is provided “as is,” and is subject
to being changed, without notice, in
future editions. Further, to the maximum extent permitted by applicable
law, Keysight disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a particular purpose. Keysight shall not be
liable for errors or for incidental or
consequential damages in connection
with the furnishing, use, or performance of this document or of any information contained herein. Should
Keysight and the user have a separate
written agreement with warranty terms
covering the material in this document
that conflict with these terms, the warranty terms in the separate agreement
will control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accordance with the terms of such license.
U.S. Government Rights
The Software is “commercial computer
software,” as defined by Federal Acquisition
Regulation (“FAR”) 2.101. Pursuant to FAR
12.212 and 27.405-3 and Department of
Defense FAR Supplement (“DFARS”)
227.7202, the U.S. government acquires
commercial computer software under the
same terms by which the software is
customarily provided to the public.
Accordingly, Keysight provides the Software
to U.S. government customers under its
standard commercial license, which is
embodied in its End User License Agreement
(EULA), a copy of which can be found at
www.keysight.com/find/sweula. The
license set forth in the EULA represents the
exclusive authority by which the U.S.
government may use, modify, distribute, or
disclose the Software. The EULA and the
license set forth therein, does not require or
permit, among other things, that Keysight:
(1) Furnish technical information related to
commercial computer software or
commercial computer software
documentation that is not customarily
provided to the public; or (2) Relinquish to,
or otherwise provide, the government rights
in excess of these rights customarily
provided to the public to use, modify,
reproduce, release, perform, display, or
disclose commercial computer software or
commercial computer software
documentation. No additional government
requirements beyond those set forth in the
EULA shall apply, except to the extent that
those terms, rights, or licenses are explicitly
required from all providers of commercial
computer software pursuant to the FAR and
the DFARS and are set forth specifically in
writing elsewhere in the EULA. Keysight
shall be under no obligation to update,
revise or otherwise modify the Software.
With respect to any technical data as
defined by FAR 2.101, pursuant to FAR
12.211 and 27.404.2 and DFARS 227.7102,
the U.S. government acquires no greater
than Limited Rights as defined in FAR 27.401
or DFAR 227.7103-5 (c), as applicable in any
technical data.
Safety Notices
A CAUTION notice denotes a hazard.
It calls attention to an operating
procedure, practice, or the like that,
if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a CAU-
TION notice until the indicated conditions are fully understood and
met.
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in personal
injury or death. Do not proceed
beyond a WARNING notice until the
indicated conditions are fully
understood and met.
For more safety information, refer to the For
Your Safety booklet included with your
Infiniium oscilloscope.
Infiniium 9000 Series Oscilloscopes—At a Glance
Table 1 9000 Series oscilloscope models
Model Analog
bandwidth
DSO/MSO9064A 600 MHz 40 Mpts/20 Mpts
DSO/MSO9104A 1 GHz 40 Mpts/20 Mpts
DSO/MSO9254A 2.5 GHz 40 Mpts/20 Mpts
DSO/MSO9404A 4 GHz 40 Mpts/20 Mpts
DSO9024H 250 MHz 100 Mpts/50 Mpts
DSO9054H 500 MHz 100 Mpts/50 Mpts
DSO9104H 1 GHz 100 Mpts/50 Mpts
DSO9204H 2 GHz 100 Mpts/50 Mpts
DSO9024H, DSO9054H, DSO9104H, and DSO9204H models have up to 12 bits of high resolution.
Standard memory depth
(2/4-channel mode)
Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 3
Ease of use with high performance
• The Keysight Technologies Infiniium oscilloscopes combine unprecedented
ease-of-use with high-performance digitizing oscilloscope functionality to
simplify your design and analysis measurement tasks.
• Traditional oscilloscope front-panel interface provides direct access to the
controls needed for most troubleshooting tasks.
• Graphical user interface with menus, windows, dialog boxes, and toolbars
provides easy access to dozens of configuration and analysis tools, ensuring
you can set up and make the most complex measurements.
• Models with bandwidths from 250 MHz to 4 GHz.
Display shows waveforms and graphical user interface
• Graphical interface allows direct interaction with waveforms, including
drag-and-drop positioning and instant waveform zoom.
• Touchscreen display allows oscilloscope operation without an external pointing
device.
•Waveforms displayed in color, making correlations easy.
• Current configuration parameters displayed near the waveform display and are
color-coded to make identification easy.
• Graphical interface menus and toolbars simplify complex measurement setups.
Horizontal controls set sweep speed and position
• Main sweep speeds from 5 ps/div to 20 s/div.
• Intensified waveforms on main sweep window make it easy to see what will
appear in the zoom window.
Acquisition and general controls start and stop the scope and do basic
setup
• Run and stop controls for continuous or single acquisitions.
•Clear display before one or more acquisitions.
• Default setup and Autoscale set initial configuration.
Hard disk drive and USB 2.0 port for saving and restoring setups and
measurement results
•Store measurement displays for inclusion in reports and test setup guides.
• Store oscilloscope setups to repeat tests another time.
• Hard disk stores oscilloscope operating system.
Trigger setup controls set mode and basic parameters
• Select Edge, Glitch, or Advanced Modes.
• Choose input source and slope.
4 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
• Use graphical user interface to simplify configuration of pattern, state, delay,
and violation trigger modes.
Vertical controls set attenuation and position
• Input attenuation adjustable from 1 mV/div to 1 V/div.
• Color-coded knobs make it easy to find the controls that affect each waveform.
Marker and quick measurements help measure waveform parameters
• Use waveform markers 1 and 2 to check voltage or Δ-time at any point on the
displayed waveform.
For more information about Infiniium oscilloscopes, see
www.keysight.com/find/scope.
Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 5
In This Guide
This guide provides the information you need to begin using the Infiniium 9000
Series oscilloscope.
Chapter 1, “Setting Up the Oscilloscope,” starting on page 9 includes power and
air flow requirements, plus other setup information.
Chapter 2, “Using the Oscilloscope,” starting on page 27 gives an overview of the
front and side panel inputs and outputs, front-panel controls, and user interface,
and tells you how to perform basic operations with the oscilloscope.
Chapter 3, “Online Help and Other Information,” starting on page 47 describes the
Infiniium oscilloscope application’s online help contents and online demos. The
online help describes how to use the Infiniium oscilloscope application in detail.
For More Information
• For detailed information on how the oscilloscope makes measurements and
how to use the oscilloscope, see the Infiniium oscilloscope application’s online
help.
• For information on controlling the oscilloscope from a remote computer, see
the Keysight Infiniium Oscilloscopes Programmer’s Guide found in the Infiniium
oscilloscope application’s online help.
• For information on testing and servicing the oscilloscope, see the Service Guide
found in the Infiniium oscilloscope application’s online help.
6 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
Contents
Infiniium 9000 Series Oscilloscopes—At a Glance / 3
In This Guide / 6
1 Setting Up the Oscilloscope
Safety / 10
Symbols / 11
Inspecting Package Contents / 12
Environmental Characteristics / 13
Ventilation / 14
Connecting Accessories and Cables / 16
Connecting Power / 18
Connecting Oscilloscope Probes / 20
Tilting the Oscilloscope for Easier Viewing / 21
Turning On the Oscilloscope / 22
Verifying Basic Oscilloscope Operation / 23
Installing Application Programs on Infiniium / 24
Changing Windows Operating System Settings / 25
Turning Off the Oscilloscope / 26
Cleaning the Oscilloscope / 26
2 Using the Oscilloscope
Front Panel Controls (Keys and Knobs) Overview / 28
User Interface Overview / 29
Using the Setup and Display Controls / 32
Starting and Stopping Waveform Acquisitions / 33
Adjusting the Horizontal Time Scale and Trigger Position / 34
Adjusting the Vertical Settings / 36
Setting Up Triggers / 38
Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 7
Using Markers and Making a Measurement / 40
Saving and Printing Data / 44
Forcing a Default Setup / 45
3 Online Help and Other Information
Accessing the Online Help / 47
Navigating the Online Help / 49
Using the Demo Wizard / 50
8 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
Keysight Infiniium 9000 Series Oscilloscopes
User’s Guide
1 Setting Up the Oscilloscope
Safety 10
Inspecting Package Contents 12
Environmental Characteristics 13
Ventilation 14
Connecting Accessories and Cables 16
Connecting Power 18
Connecting Oscilloscope Probes 20
Tilting the Oscilloscope for Easier Viewing 21
Turning On the Oscilloscope 22
Verifying Basic Oscilloscope Operation 23
Installing Application Programs on Infiniium 24
Changing Windows Operating System Settings 25
Turning Off the Oscilloscope 26
Cleaning the Oscilloscope 26
This chapter shows how to set up your Infiniium oscilloscope, connect power and
accessories, and verify general operation.
9
1 Setting Up the Oscilloscope
WARNING
WARNING
WARNING
Safety
This product has been designed and tested in accordance with accepted industry
standards, and has been supplied in a safe condition. The documentation contains
information and warnings that must be followed by the user to ensure safe
operation and to maintain the product in a safe condition.
Safety Compliance
This product complies with the current editions of the following standards:
• CAN/CSA-C22.2 No. 61010-1-12
• UL Std. No. 61010-1 (3
Acoustic Statement
This is to declare that this instrument is in conformance with the German
Regulation on Noise Declaration for Machines (Laermangabe nach der
Maschinenlaermrerordnung -3.GSGV Deutschland).
rd
edition)
LpA < 70 dB
Operator position
Normal position per ISO 7779
General Safety Notices
This is a Safety Protection Class I Product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be inserted in a
socket outlet provided with a protective earth contact. Any interruption of the
protective conductor inside or outside of the product is likely to make the product
dangerous. Intentional interruption is prohibited.
If this product is not used as specified, the protection provided by the equipment
could be impaired. This product must be used in a normal condition (in which all
means for protection are intact) only.
No operator-serviceable parts inside. Refer servicing to qualified personnel. To
prevent electrical shock, do not remove covers.
10 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
Symbols
Setting Up the Oscilloscope 1
These symbols are used on the Infiniium oscilloscope.
Symbol Description
The C-Tick mark is a registered trademark of the Australian Spectrum
Management Agency.
The CE mark is a registered trademark of the European Community.
ICES / NMB-001 Cet appareil ISM est conforme a la norme NMB du Canada.
This is a marking to indicate product compliance with the Industry Canadian
Interference-Causing Equipment Standard (ICES-001).
This is also a symbol of an Industrial Scientific and Medical Group 1 Class A
product (CISPR 11, Clause 4).
This symbol indicates separate collection for electrical and electronic
equipment mandated under EU law as of August 13, 2005. All electric and
electronic equipment are required to be separated from normal waste for
disposal (Reference WEEE Directive 2002/96/EC).
Indicates the time period during which no hazardous or toxic substance
elements are expected to leak or deteriorate during normal use. Forty years
is the expected useful life of the product.
The symbol on all primary and secondary packaging indicates compliance to
China standard GB 18455-2001.
To return unwanted products, contact your local Keysight office.
The CSA mark is a registered trademark of the CSA International.
Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 11
1 Setting Up the Oscilloscope
Inspecting Package Contents
✔ Inspect the shipping container for damage.
• Keep the shipping container or cushioning material until you have inspected
the contents of the shipment for completeness and have checked the
oscilloscope mechanically and electrically.
• If the shipping container is damaged, or the cushioning materials show signs
of stress, notify the carrier and your Keysight Technologies Sales Office.
Keep the shipping materials for the carrier’s inspection. The Keysight
Technologies Sales Office will arrange for repair or replacement at
Keysight’s option without waiting for claim settlement.
✔ Inspect the oscilloscope.
If there is mechanical damage or a defect, or if the oscilloscope does not
operate properly or does not pass performance tests, notify your Keysight
Technologies Sales Office.
✔ Verify that you received the following items in the Infiniium oscilloscope
packaging.
• Infiniium oscilloscope
• Localized power cord
• Keyboard
• Mouse
• Touch screen stylus
• Accessory pouch (mounts on rear of oscilloscope)
• Front panel cover
• N2873A 10:1 divider passive probe per scope channel
• Channel flying lead set logic probe, MSO cable, and calibration fixture (MSO
models only)
If anything is missing, contact your nearest Keysight Technologies Sales Office.
✔ Verify that you received the options and accessories you ordered and that none
were damaged.
For a complete list of options and accessories available for the 9000 Series
oscilloscopes, see the Infiniium 9000 Series Oscilloscopes Data Sheets.
12 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
Environmental Characteristics
Environment Indoor use only
Ambient temperature Operating: +5 °C to +40 °C
Non-operating: –40 °C to +65 °C
Humidity Operating: up to 95% relative humidity (non-condensing) at +40 °C
Non-operating: up to 90% relative humidity at +65 °C
Altitude Operating: up to 4,000 meters (13,123 feet)
Non-operating: up to 15,300 meters (50,000 feet)
Weight 26 lbs (11.8 kg)
Dimensions 16.8 in (43 cm) wide, 12.9 in (33 cm) tall, and 9 in (23 cm) deep
Safety UL61010-1 3
CAN/CSA-22.2 No. 61010-1-12
Installation category II
rd
edition
Setting Up the Oscilloscope 1
Voltage fluctuations The mains supply voltage fluctuations are not to exceed ±10% of the nominal
supply voltage.
Pollution degree The Infiniium 9000 Series oscilloscopes may be operated in environments of
Pollution Degree 2.
Pollution degree
definitions
Pollution Degree 1: No pollution or only dry, non-conductive pollution occurs. The
pollution has no influence. Example: A clean room or climate-controlled office
environment.
Pollution Degree 2. Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation may occur.
Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non-conductive pollution
occurs which becomes conductive due to condensation which is expected.
Example: Sheltered outdoor environment.
Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 13
1 Setting Up the Oscilloscope
Minimum 0 mm
Minimum 0 mm
Front panel of oscilloscope
Minimum 25.4 mm
Minimum 25.4 mm
Minimum 75 mm
Top View
Rear Panel
Minimum bottom clearance: No intrusion into the
space under the oscilloscope as defined by the
feet. Feet must rest on hard surface.
CAUTION
Ventilation
1 Position the oscilloscope where it will have sufficient clearance for airflow
around the top, back, and sides.
Figure 1 Positioning the 9000 Series oscilloscope with sufficient clearance
VENTILATION REQUIREMENTS: When installing the instrument(s) into a cabinet,
consider the convection flow into and out of the cabinet. Also consider the individual
instruments, to avoid having the heated discharge of one instrument become the
cooling intake air for another instrument.
14 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
Location
Setting Up the Oscilloscope 1
Install the oscilloscope so that the detachable power cord is readily identifiable
and is easily reached by the operator.
The detachable power cord is the oscilloscope disconnecting device. It
disconnects the mains circuits from the mains supply before other parts of the
oscilloscope. (The front panel switch is only a standby switch and is not a LINE
switch.)
Alternatively, an externally installed switch or circuit breaker (which is readily
identifiable and is easily reached by the operator) may be used as a disconnecting
device.
Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 15
1 Setting Up the Oscilloscope
NOTE
Connecting Accessories and Cables
A mouse and keyboard can be plugged into either a USB port or a PS2 port. There
are several USB connectors on the front panel or the side panel that can be used.
When using the PS2 port, the keyboard must be plugged in prior to turning on
power to the oscilloscope.
Connect your LAN cable to the RJ-45 connector on the side panel of the
oscilloscope.
After you have connected to the LAN card, you must set up the network. Exit the oscilloscope
application before you start setting up your network.
If you do not know how to set up a network in the Windows 7 operating system, see your
network administrator or use the Windows 7 operating system’s online help.
Side panel USB connectors can be used for any USB devices. There are also three
USB connectors in the lower right corner of the front panel.
If you have a parallel printer, you will need a parallel printer cable. Connect the
cable to the parallel port on the side panel of the oscilloscope.
If you have a serial printer, you will need a 9-pin to 25-pin serial printer cable.
Some printers may require other cable configurations, but the oscilloscope has a
9-pin serial connector. Connect the cable into the RS-232 port.
16 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide
Loading...