Keysight 81960A Compact
Tunable Laser Source
Module
Getting Started
Guide
Notices
CAUTION
WARNING
© Keysight Technologies 2017
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or translation into a foreign language) without prior
agreement and written consent from
Keysight Technologies as governed by
United States and international copyright
laws.
Manual Part Number
81960-90A01
Edition
Edition 4.0, July 2017
Printed in Malaysia
Keysight Technologies Deutschland GmbH
Herrenberger Strasse 130,
71034 Böblingen, Germany
Technology Licenses
The hard ware and/or software described in
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
U.S. Government Rights
The Software is “commercial computer
software,” as defined by Federal Acquisition
Regulation (“FAR”) 2.101. Pursuant to FAR
12.212 and 27.405-3 and Department of
Defense FAR Supplement
(“DFARS”) 227.7202, the U.S. government
acquires commercial computer software
under the same terms by which the software is customarily provided to the public.
Accordingly, Keysight provides the Software to U.S. government customers under
its standard commercial license, which is
embodied in its End User License Agreement (EULA), a copy of which can be found
at http://www.keysight.com/find/sweula.
The license set forth in the EULA represents
the exclusive authority by which the U.S.
government may use, modify, distribute, or
disclose the Software. The EULA and the
license set forth therein, does not require
or permit, among other things, that Keysight: (1) Furnish technical information
related to commercial computer software
or commercial computer software documentation that is not customarily provided
to the public; or (2) Relinquish to, or otherwise provide, the government rights in
excess of these rights customarily provided
to the public to use, mod ify, reproduce,
release, perform, display, or d isclose commercial computer software or commercial
computer software documentation. No
additional government requirements
beyond those set forth in the EULA shall
apply, except to the extent that those
terms, rights, or licenses are explicitly
required from all providers of commercial
computer software pursuant to the FAR and
the DFARS and are set forth specifically in
writing elsewhere in the EULA. Keysight
shall be under no obligation to update,
revise or otherwise modify the Software.
With respect to any technical data as
defined by FAR 2.101, pursuant to FAR
12.211 and 27.404.2 and DFARS 227.7102,
the U.S. government acquires no greater
than Limited Rights as defined in FAR
27.401 or DFAR 227.7103-5 (c), as applicable in any technical data.
Warranty
THE MATERIAL CONTAINED IN THIS
DOCUMENT IS PROVIDED "AS IS," AND IS
SUBJECT TO BEING CHANGED, WITHOUT
NOTICE, IN FUTURE EDITIONS. FURTHER,
TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, KEYSIGHT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR
IMPLIED WITH REGARD TO THIS MANUAL
AND ANY INFORMATION CONTAINED
HEREIN, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. KEYSIGHT SHALL
NOT BE LIABLE FOR ERRORS OR FOR
INCIDENTAL OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH THE
FURNISHING, USE, OR PERFORMANCE OF
THIS DOCUMENT OR ANY INFORMATION
CONTAINED HEREIN. SHOULD KEYSIGHT
AND THE USER HAVE A SEPARATE
WRITTEN AGREEMENT WITH WARRANTY
TERMS COVERING THE MATERIAL IN THIS
DOCUMENT THAT CONFLICT WITH THESE
TERMS, THE WARRANTY TERMS IN THE
SEPARATE AGREEMENT WILL CONTROL.
Safety Notices
A CAUTION notice denotes a hazard. It
calls attention to an operating procedure, practice, or the like that, if not
correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not proceed beyond a CAUTION notice until
the indicated conditions are fully
understood and met.
A WARNING notice denotes a hazard. It
calls attention to an operating procedure, practice, or the like that, if not
correctly performed or adhered to,
could result in personal injury or death.
Do not proceed beyond a WARNING
notice until the indicated conditions
are fully understood and met.
2 Keysight 81960A Compact TLS Module Getting Started Guide
Contents
1 Getting Started
Safety Considerations 6
Safety Symbols 6
Initial Inspection 7
Line Power Requirements 7
Operating Environment 7
Storage and Shipment 7
Protecting Empty Module Slots 8
Fitting Blind Panels for Front-Loadable Module Slots 8
Fitting a Filler Module for Back-Loadable Module Slots 9
Initial Safety Information for Tunable Laser Modules 10
Laser Safety Labels 11
Laser class 1M label 11
Introduction 13
What is a Tunable Laser Source? 13
Installation 13
Front Panels 14
Front Panel Controls and Indicators 14
Typical Use Models 15
Optical Output 16
Polarization Maintaining Fiber 16
Angled and Straight Contact Connectors 16
Keysight 81960A Compact TLS Module Getting Started Guide 3
Keysight 81960A
Compact Tunable Laser Source Module
Getting Stared Guide
1 Getting Started
This chapter provides a general description of Keysight 81960A Tunable
Laser Source Family.
Safety Considerations / 6
Initial Safety Information for Tunable Laser Modules / 10
Laser Safety Labels / 11
Introduction / 13
Typical Use Models / 15
Optical Output / 16
1 Getting Started
WARNING
Safety Considerations
Safety Symbols
The following general safety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended
use of the instrument. Keysight Technologies assumes no liability for the
customer’s failure to comply with these requirements.
Before operation, review the instrument and manual, including the red
safety page, for safety markings and instructions. You must follow these to
ensure safe operation and to maintain the instrument in safe condition.
The WARNING sign denotes a hazard. It calls attention to a procedure,
practice or the like, which, if not correctly performed or adhered to, could
result in injury or loss of life. Do not proceed beyond a WARNING sign
until the indicated conditions are fully understood and met.
6 Keysight 81960A Compact TLS Module Getting Started Guide
The apparatus will be marked with this
symbol when it is necessary for the user
to refer to the instruction manual in
order to protect the apparatus against
damage.
Hazardous laser radiation.
Invisible laser radiation.
Initial Inspection
WARNING
WARNING
Getting Started 1
Inspect the shipping container for damage. If there is damage to the
container or cushioning, keep them until you have checked the contents of
the shipment for completeness and verified the instrument both
mechanically and electrically.
If the contents are incomplete, mechanical damage or defect is apparent,
notify the nearest Keysight Technologies Sales/Service Office.
To avoid hazardous electrical shock, do not perform electrical tests when
there are signs of shipping damage to any portion of the outer enclosure
(covers, panels, etc.).
You MUST return instruments with malfunctioning laser modules to a
Keysight Technologies Sales/Service Center for repair and calibration.
Keysight 81960A Compact TLS Module Getting Started Guide 7
Line Power Requirements
The Keysight 81960A Compact Tunable Laser Source modules operate
when installed in 8163A/B Lightwave Multimeters, 8164A/B Lightwave
Measurement Systems, and 8166A/B Lightwave Multichannel Systems.
Operating Environment
The safety information in your mainframe’s User’s Guide summarizes the
operating ranges for the Keysight 81960A Compact Tunable Laser Source
modules. In order for these modules to meet specifications, the operating
environment must be within the limits specified for your mainframe.
Storage and Shipment
A Keysight 81960A Compact Tunable Laser Source module can be stored
or shipped at temperatures between - 40°C and + 70°C.
Protect the module from temperature extremes that may cause
condensation within it.
1 Getting Started
NOTE
Protecting Empty Module Slots
Fitting a Blind Panel or Filler Module helps to:
• prevent dust pollution and
• optimize cooling by guiding the air flow.
Fitting Blind Panels for Front-Loadable Module Slots
To fit the a blind panel (part number - 08163-40199), perform the
following procedure:
1 Position the blind panel as shown in Figure 1 on page -8. Position the
end closest to the handle against the bottom edge of the slot.
Figure 1 Fitting a Blind Panel
2 Push the top of the blind panel so that it clicks into position.
To remove a blind panel, pull the handle.
8 Keysight 81960A Compact TLS Module Getting Started Guide
Fitting a Filler Module for Back-Loadable Module Slots
The Keysight 81960A Filler Module must be used if you have not installed a
back-loadable Tunable Laser module into the 8164A/B Lightwave
Measurement System.
The Keysight 81960A Filler Module can be fitted and removed in the same
way as any back-loadable module.
Getting Started 1
Keysight 81960A Compact TLS Module Getting Started Guide 9
1 Getting Started
Initial Safety Information for Tunable Laser Modules
The laser sources specified by this user guide are classified according to
IEC 60825-1.
The laser sources comply with 21 CFR 1040.10 except for deviations
pursuant to Laser Notice No. 50 dated 2007-June-24:
Table 1 Standard Laser Source Modules Laser Safety Information
Keysight 81960A
Laser type ECL-Laser
Wavelength Range 1505 nm-1630 nm
Max. CW output power* 50 mW
Beam waist diameter 9 μm
Numerical aperture 0.1
Laser Class according to
IEC 60825-1 (2007)
Max. permissible CW output power 163 mW
* Max. CW output power is defined as the highest possible optical power that the laser source can
produce at its output connector.
** Max. permissible CW output power is the highest optical power that is permitted within the
appropriate laser class
InGaAsP
1M
10 Keysight 81960A Compact TLS Module Getting Started Guide
Laser Safety Labels
WARNING
CAUTION
Laser class 1M label
Getting Started 1
Figure 2 Class 1M Safety Label - 81960A
A sheet of laser safety labels is included with the laser module as required.
In order to meet the requirements of IEC 60825-1 we recommend that you
stick the laser safety labels, in your language, onto a suitable location on
the outside of the instrument where they are clearly visible to anyone using
the instrument.
Please pay attention to the following laser safety warning:
• The laser output can be controlled by GUI, GPIB state command and
the front panel button.
• Do not switch on the instrument when there is no termination to the
optical output connector, to the optical fiber or to the attached
device. The laser radiation can seriously damage your eyesight.
• The use of optical instruments with this product will increase eye
hazard.
• Refer servicing only to qualified and authorized personnel.
The built in laser diode is active whenever the instrument is powered on,
therefore disabling the output is not sufficient to establish eye safe
conditions.
Keysight 81960A Compact TLS Module Getting Started Guide 11
1 Getting Started
NOTE
The remote interlock function interrupts the laser current when the
connector is open.
12 Keysight 81960A Compact TLS Module Getting Started Guide
Introduction
Getting Started 1
What is a Tunable Laser Source?
A Tunable Laser Source (TLS) is a laser source for which the wavelength
can be varied through a specified range. The Keysight 81960A is a TLS
with continuous-sweep measurement capabilities, where wavelength and
power are regulated while the laser changes wavelength at a constant
rate. The Keysight Technologies range of TLS modules also allow you to
set the output power, and to choose between continuous wave or
modulated power.
With the 81960A, Keysight sets a new mark in tunable laser performance
with faster sweep speeds and repetition rates combined with the dynamic
accuracy specifications needed for DWDM component measurements, all
packaged in a compact module. The new and unique capability of
dynamically specified sweeps in both directions enhances the repetition
rate even further for real-time use in adjustment and calibration
procedures.
Installation
The Keysight 81960A Tunable Laser Source Family is a front-loadable
module.
For a description of how to install your module, refer to “How to Fit and
Remove Modules” in the Installation and Maintenance chapter of your
mainframe’s User’s Guide.
Keysight 81960A Compact TLS Module Getting Started Guide 13
1 Getting Started
CAUTION
Front Panels
Figure 3 Keysight 81960A Compact Tunable Laser Module
Front Panel Controls and Indicators
Switch the laser output on or off using the button on its front panel, using
the [State] parameter in the instrument’s Graphical User Interface, or
remotely using GPIB commands. When the ‘Active’ LED is lit the output is
enabled. When the active LED is not lit the output is disabled.
The built-in laser diode is active whenever the instrument is powered on,
therefore disabling the output is not sufficient to establish eye safe
conditions.
14 Keysight 81960A Compact TLS Module Getting Started Guide
Typical Use Models
Getting Started 1
The Keysight 81960A Tunable Laser Source Family provides high output
power up to +14 dBm.
This module covers a total wavelength range of 125 nm in the C- and
L-band.
This laser has been designed for making spectral measurements of passive
fiber optic components, where results with high wavelength accuracy and
dynamic range are needed. The laser is especially well supported by the
swept-wavelength measurement engines in the N7700A software suite
and can be programmed directly.
The key application for this laser is high repetition-rate scanning for real
time updates, benefiting from the higher sweep speeds and acceleration,
bidirectional sweeping and improved uploading of the logged wavelength
monitor data. These features are best harnessed with the N7700A-102 fast
spectral loss engine, which synchronizes the laser with the N7744A or
N7745A power meters to produce power and loss spectra in a convenient
GUI display. The wavelength resolution and 50-60 dB dynamic range
achieved surpass comparable measurements with an OSA, with repetition
rates better than 2 Hz for add-drop filter adjustment and calibration.
The high performance in continuous sweeps also matches this laser well to
the single-sweep PDL and IL N7700A measurement engine. The dynamic
wavelength accuracy will satisfy the test needs for many DWDM
components at an optimized performance/price balance. The source to
spontaneous noise ratio, SSE, while not as high as the 81600B series, is
also sufficient to qualify the isolation of many filter devices. The higher
sweep speeds save time measuring broadband devices not needing such
high wavelength resolution.
These same advantages apply to use with the N7788B component
analyzer for measuring PMD and DGD in addition to PDL and IL. The
relative wavelength accuracy during the sweeps is especially important for
accurate DGD measurements using the JME method, since the result
depends on the derivatives with respect to wavelength. The high speed is
great for measuring isolators, PMF and other broadband components.
The powerful lambdascan functions of the 816x Plug&Play driver for
customized programs, and the N7700A IL engine which provides a GUI
interface to these functions also support power and IL measurements
together with any of the Keysight power meters. And the performance of
swept-wavelength measurements in the N4150A PFL, including fast
repetitive sweeps, are also supported with this newest member of the
Keysight swept tunable lasers.
Keysight 81960A Compact TLS Module Getting Started Guide 15
1 Getting Started
E
H
Slow Axis (Polarization Axis)
Connector Key
Fiber Cladding
Fiber Core
(8-µm Diameter)
Stress Rods
Not to Scale
Optical Output
Polarization Maintaining Fiber
A Polarization maintaining fiber (PMF) output is standard for Keysight
81960A Tunable Laser Source Familys.
PMF is aligned to maintain the state of polarization. A well defined state of
polarization helps ensure constant measurement conditions.
The fiber is of Panda type, with TE mode in the slow axis in line with the
connector key.
Figure 4 PMF Output Connector
For further details on connector interfaces and accessories, refer to the
81960A User’s Guide.
Angled and Straight Contact Connectors
To ensure most accurate measurements, the Keysight 81960A Fast
sweeping Compact TLS module is equipped with angled contact
connectors.
16 Keysight 81960A Compact TLS Module Getting Started Guide
Getting Started 1
CAUTION
Straight Contact
Connector Symbol
Angled Contact
Connector Symbol
NOTE
Angled contact connectors help you to control return loss, since reflected
light tends to reflect into the cladding, reducing the amount of light that
reflects back to the source.
With the angled contact connectors on your instrument, you can only use
cables with angled connectors.
Figure 5 Angled and Straight Contact Connector Symbols
Figure 5 on page -17 shows the symbols that tell you whether the contact
connector of your Tunable Laser module is angled or straight. The angled
contact connector symbol is colored green.
Keysight 81960A Compact TLS Module Getting Started Guide 17
You should connect straight contact fiber end connectors with neutral
sleeves to straight contact connectors and connect angled contact fiber
end connectors with green sleeves to angled contact connectors.
Angled non-contact fiber end connectors with orange sleeves cannot be
directly connected to the instrument.
For further details on connector interfaces and accessories, refer to the
81960A User’s Guide.
This information is subject to
change without notice.
© Keysight Technologies 2017
Edition 4.0, July 2017
Printed in Malaysia
www.keysight.com
Loading...