Agilent
ENA RF Network Analyzer
Configuration Guide
E5071C 9 kHz to 4.5 GHz
100 kHz to 4.5 GHz (with bias tees)
9 kHz to 8.5 GHz
100 kHz to 8.5 GHz (with bias tees)
E5091A Multiport test set
This configuration guide describes standard configurations,
options, accessories and peripherals for the ENA RF
network analyzer. Refer to the ENA Data Sheet for a
complete description of the ENA RF network analyzers
and the E5091A multiport test set.
2
Ordering guide for the ENA
This guide is intended to assist you in the ordering process.
Additional information and products (such as multiport
test set, calibration kits and cables) are described
throughout this document.
❍ = Choose ONE and ONLY one
❏ = Choose any combination
Step 1: Choose your frequency range, number of test ports,
and with or without bias tees
Up to 4.5 GHz range
9 kHz to 4.5 GHz (without bias tees)
❍ 2-port S-parameter test set, choose Option E5071C-240
❍ 4-port S-parameter test set, choose Option E5071C-440
100 kHz to 4.5 GHz (with bias tees)
❍ 2-port S-parameter test set, choose Option E5071C-245
❍ 4-port S-parameter test set, choose Option E5071C-445
Up to 8.5 GHz range
9 kHz to 8.5 GHz (without bias tees)
❍ 2-port S-parameter test set, choose Option E5071C-280
❍ 4-port S-parameter test set, choose Option E5071C-480
100 kHz to 8.5 GHz (with bias tees)
❍ 2-port S-parameter test set, choose Option E5071C-285
❍ 4-port S-parameter test set, choose Option E5071C-485
Step 2: Would you like to add frequency-offset
measurement capability?
❍ Yes, choose Option E5071C-008
1
❍ No
Step 3: Would you like to add time domain analysis?
❍ Yes, choose Option E5071C-010
❍ No
Step 4: Would you like to add Measurement Wizard Assistant
(MWA) Software?
❍ Yes, choose Option E5071C-790
❍ No
Step 5: Would you like a high-stability time base?
❍ Yes, choose Option E5071C-1E5
❍ No, choose Option E5071C-UNQ
Step 6: Would you like any rack mount accessories?
❏ Rack mount kit only, choose Option E5071C-1CM
❏ Front handle kit only, choose Option E5071C-1CN
❏ Rack mount and front handle kit, choose
Option E5071C-1CP
Step 7: Would you like to add any accessories?
❏ Add a keyboard, choose Option E5071C-810
❏ Add a mouse, choose Option E5071C-820
Step 8: Choose calibration certificate options
❍ ISO 17025 compliant calibration certificate with test
data, choose Option E5071C-1A7
❍ ANSI Z540 compliant calibration certificate with test
data, choose Option E5071C-A6J
Step 9: Would you like to add external test set?
❍ Yes, order E5091A
❍ No
Step 10: Which would you like, a nine-port test set or a
thirteen/sixteen-port configurable test set?
❍ Nine-port, choose E5091A-009
❍ Thirteen/sixteen-port configurable test set,
choose E5091A-016
Step 11: Would you like any rack mount accessories
for the test set?
❏ Rack mount kit only, choose Option E5091A-1CM
❏ Front handle kit only, choose Option E5091A-1CN
❏ Rack mount and front handle kit, choose
Option E5091A-1CP
Step 12: Choose a language of the manual or delete a
manual set
❍ Add English manual set, choose Option E5091A-ABA
❍ Add Japanese manual set, choose Option E5091A-ABJ
❍ Delete a manual set, choose Option E5091A-0B0
Step 13: Would you like additional manual set?
❏ Extra English manual set, Choose Option E5091A-800
and specify quantity
❏ Extra Japanese manual set, Choose
Option E5091A-801 and specify quantity
Step 14: Would you like a calibration certificate (ISO
17025 compliant) with test data?
❍ Yes, choose Option E5091A-1A7
❍ No
1 Order the 82357B USB/GPIB interface at the same time if you would
like to control power meters with the E5071C. This will allow you
to conduct scalar mixer calibrations (SMC), power calibrations, or
receiver calibrations after power calibrations.
3
Agilent ENA
RF network analyzer
The ENA is an integrated RF network analyzer with twoor four-port S-parameter test set, synthesized RF source,
10.4-inch color LCD, and hard disc drives. Included with
the each ENA Series network analyzer is a 1-year
return-to-Agilent service warranty.
Options
Test ports, frequency range, and with or
without bias tees Options
Up to 4.5 GHz range
9 kHz to 4.5 GHz (without bias tees)
❍ Option E5071C-240 2-port S-parameter test set
❍ Option E5071C-440 4-port S-parameter test set
100 kHz to 4.5 GHz (with bias tees)
❍ Option E5071C-245 2-port S-parameter test set
❍ Option E5071C-445 4-port S-parameter test set
Up to 8.5 GHz range
9 kHz to 8.5 GHz (without bias tees)
❍ Option E5071C-280 2-port S-parameter test set
❍ Option E5071C-480 4-port S-parameter test set
100 kHz to 8.5 GHz (with bias tees)
❍ Option E5071C-285 2-port S-parameter test set
❍ Option E5071C-485 4-port S-parameter test set
Additional feature options
❏ Option E5071C-0081add frequency-offset measurement
capability
Adds frequency-offset sweep and harmonics
measurement capabilities.
❏
Option E5071C-010
add time domain analysis capability
Adds time domain transform and gating capabilities.
❏
Option E5071C-790 add Measurement Wizard Assistant (MWA)
Software
Adds Measurement Wizard Assistant (MWA) software to
further simplify your multiport measurements.
Frequency stability options
❍
Option E5071C-1E5 high stability time base
Adds the standard time base reference with a higher
stability unit.
❍
Option E5071C-UNQ
standard stability time base
Accessories options
❐
Option E5071C-1CM rack mount kit
Adds a rack mount kit (part number 5063-9216)
❐
Option E5071C-1CN front handle kit
Adds a front handle kit (part number 5063-9229)
❐
Option E5071C-1CP rack mount and front handle kit
Adds a rack mount kit and a handle kit
(part number 5063-9223)
❐
Option E5071C-810 Adds a keyboard
❐
Option E5071C-820 Adds a mouse
Certification option
❍ Option
E5071C-
1A7
ISO 17025 compliant calibration
❍ Option
E5071C-
A6J
ANSI Z540 compliant calibration
For online information about Agilent’s service and support
products visit: www.agilent.com/find/tm_services
1 Order the 82357B USB/GPIB interface at the same time if you would
like to control power meters with the E5071C. This will allow you
to conduct scalar mixer calibrations (SMC), power calibrations, or
receiver calibrations after power calibrations.
Loading...