Agilent E1416A
Power Meter
Data Sheet
•
1-Slot, C-size, message based
•
Single channel
•
± 0.02 dB or ± 0.5% instrumentation accuracy
•
100 kHz to 110 GHz, sensor dependent
•
–70 to +44 dBm
•
1 mW power reference
Description
The Agilent Technologies E1416A Power Meter is a C-size,
1-slot, message-based VXI module. It is a high-
performance, single-channel, programmable, average power
meter compatible with the Agilent 8480 family of
thermocouple and diode power sensors.
This power meter makes accurate and reliable average
power measurements. With its powerful programming
capability, exceptional accuracy and reliability, it lets you
measure your test signal with speed, precision, and
confidence!
Agilent E1416A
Refer to the Agilent Technologies Website for instrument
driver availability and downloading instructions, as well as
for recent product updates, if applicable.
Product Specifications
Characteristics
Frequency: Allows entry of test signal frequency
Offset: Allows measurement to be offset by
Resolution: Selection of 0.1, 0.01, and 0.001 dB.
Averaging: Selectable from 1 to 1024 readings
Duty cycle: Displays peak power representation of
Sensor tables: Allows entry and storage of up to 10
Save/recall states: Saves and recalls 10 complete
General
Frequency: 100 kHz to 110 GHz sensor dependent
Power range: –70 to + 44 dBm
Dynamic range: 50 dB in 10 dB ranges
Results units: W, dBm
Accuracy: ± 0.02 dB or ± 0.5% (instrument,
Zero set: ± 0.5% of full scale on most sensitive
Power reference: 1.00 mW
Functions
Power: Yes
Offset: Yes
Averaging: Yes
Duty cycle: Yes
for cal factor selection
± 99.99 dB
Auto Filter Mode automatically
selects the required number of
averages for the chosen range and
resolution
powers of 2)
measured RMS power for rectangular
pulses
sensor cal factor tables versus
frequency
E1416A operating states
(100 pW to 25 W)
sensor dependent
(absolute)
, %, dB
relative
absolute mode). In ranges of 4 or 5,
add sensor linearity percentage
range. Divide by 10 for each higher
range, ± 1 count
(50 MHz oscillator factory
set to ± 0.7% traceable to NIST)
General Specifications
VXI Characteristics
VXI device type: Message based
Size: C
Slots: 1
Connectors: P1/2
Shared memory: n/a
VXI buses: n/a
(in
Instrument Drivers - See the Agilent Technologies Website
(http://www.agilent.com/find/inst_drivers) for driver availability and
downloading.
Command module firmware: n/a
Command module firmware rev: n/a
I-SCPI Win 3.1: n/a
I-SCPI Series 700: n/a
C-SCPI LynxOS: n/a
C-SCPI Series 700: n/a
Panel Drivers: Yes
VXI
,
plug&play
VXI
plug&play
VXI
plug&play
Module Current
+5 V: 1 0.1
+12 V: 00
–12 V: 00
+24 V: 0.1 0.01
–24 V: 0.1 0.01
–5.2 V 00
–2 V: 00
Cooling/Slot
Watts/slot: 12.20
∆P mm H
Air Flow liter/s: 0.20
Win Framework: Yes
Win 95/NT Framework: Yes
HP-UX Framework: No
O: 1.00
2
I
PM
I
DM
2
Loading...