909A dc-18 GHz
909D dc-26.5 GHz
Coaxial Terminations
Operating Note
Manual Part Number: 00909-90034
Printed in USA
April 2005
Supersedes: July 2001
Revision 3.0
Notice
The information contained in this document is subject to change without
notice.
Agilent Technologies makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Agilent Technologies
shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or
use of this material.
Agilent Technologies assumes no responsibility for the use or reliability of
its software on equipment that is not furnished by Agilent Technologies.
This document contains propri et ary information which is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated to another language without prior
written consent of Agilent Technologies.
R
ESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the U.S. Government is subject to
restrictions as set forth in subparagraph (c)(1)(i i) of the Rights in Technical
Data and Computer Software clause at DFARS 252.227-7013 for DOD
agencies, and subpara graphs (c)(1) and (c)(2) of the Commercial Computer
Software Restricted Rights claus e at FAR 52.227 -19 for other agencies.
Agilent Technologies, Inc.
1400 Fountaingrove Parkway
Santa Rosa, CA 95403-1799, U.S.A.
© Copyright 2000 - 2001, 2005 Agilent Technologies, Inc.
ii Agilent 909A, 909D Operating Note
In This Manual…
Overview, page 1
•
• Specifications, page 2
• Environmental Requirements, page 3
Agilent 909A, 909D Operating Note iii
Warranty
Custom systems are warranted by contractual agreement between Agilent
Technologies and the customer.
Certification Agilent Technologies, Inc. , certifies th at this product met its published
specifications at the time of shipment from the factory. Agilent Technologies
further certifies that its calibration measurements are traceable to the
United States National Institute of Standards and Technology (NIST,
formerly NBS), to the extent allowed by the Institute’s calibration facility,
and to the calibration facilities of other International St andards
Organization members.
Assistance Product maintenance agreements and other customer assistance agreements
are available for Agilent Technologies products. Any adjustment,
maintenance, or repair of this product must be performed by qualified
personnel. Contact your customer engineer after referring to “Contacting
Agilent” on the following page.
iv Agilent 909A, 909D Operating Note
Loading...