The HP 1670-Series
This literature was published years prior to the establishment of Agilent Technologies as a company independent from Hewlett-Packard
and describes products or services now available through Agilent. It may also refer to products/services no longer supported by Agilent.
We regret any inconvenience caused by obsolete information. For the latest information on Agilent’s test and measurement products go to:
www.agilent.com/find/products
Or in the US, call Agilent Technologies at 1-800-452-4844 (8am–8pm EST)
Discontinued Product—Support Information Only
Benchtop Logic Analyzers
Technical Data
Identifying the cause of problems in
embedded microprocessor system
designs can be difficult. The
Hewlett-Packard 1670-series benchtop logic analyzers have the features to help the embedded system
design team find hardware and software defects quickly .
With 64K of acquisition memory
(1M optional) the HP 1670-series
logic analyzers are the first benchtop logic analyzers which display
processor mnemonics and verify
critical hardware timing relationships over a long period of time.
With the standard Ethernet LAN
interface, the software designer can
now capture a real-time microprocessor trace and time-correlate it to
source code in C++ or other highlevel languages on a PC or workstation. For time-correlation of source
code, order the HP B3740A
Software Analysis package.
The combination of deep memory ,
large internal disk drive, and LAN
make the HP 1670-series of benchtop logic analyzers especially well
suited to solving your integration
problems.
• Mass storage is provided by an internal hard drive which provides quick
storage and retrieval of files.
• The 3.5-inch high-density flexible
disk drive supports both DOS and
LIF formats.
• The LAN interface enables access to
the logic analyzer files via FTP or
NFS. Use X11 windows to control or
view the logic analyzer on a PC or
workstation. The LAN interface
includes both Ethertwist (10BASE-T)
and ThinLan (10BASE 2) connectors.
• Store data as ASCII files and screen
images in TIFF, PCX, and EPS
(encapsulated PostScriptTM) formats.
Get to the root cause of
problems quickly
• New graphical trigger macros make
trigger setup easier.
• Centronics, RS-232, HP-IB and LAN
communication ports make connecting to other devices easier than ever.
All of these come standard on all
models of the HP 1670-series.
• The HP 1670-series operating system
includes System Performance
Analysis (SPA). SPA provides state
histograms, state overview , and time
interval analysis.
• The HP E2450A Symbolic Download
Utility is included with the HP 1670series. This utility provides the capability to extract symbolic information
from popular object module formats.
PostScriptTMis a trademark of Adobe
Systems Incorporated.
Logic Analyzer Key Specifications and Characteristics
_______________________________________________________________________
Model Number HP 1670D HP 1671D HP 1672D
_______________________________________________________________________
State and Timing 136 102 68
Channels
_______________________________________________________________________
Timing Analysis Conventional: 125 MHz all channels, 250 MHz half channels
_______________________________________________________________________
State Analysis 100 MHz, all channels
Speed
_______________________________________________________________________
State Clocks/ 4 4 4
Qualifiers
_______________________________________________________________________
Memory Depth 64K per channel, 128K in timing half-channel mode
per Channel (1M per channel optional memory ,
_______________________________________________________________________
2M in timing half-channel mode)
HP 1670-Series
General-Product
Information
2
_________________________
Human Interface
_________________________
Front Panel A knob and keypads
make up the front-
panel human interface.
Keys include control,
menu, display navigation, and alpha-numer-
_________________________
Mouse A DIN mouse is shipped
_________________________
Keyboard The logic analyzer can
_________________________
ic entry functions.
as standard equipment.
It provides full instrument control. Knob
functionality is replicated by holding down the
right button and moving
the mouse left or right.
also be operated using
a DIN keyboard. Order
the HP Logic Analyzer
Keyboard Kit, model
number HP E2427B.
Input/Output, Control, and
Printing
_________________________
I/O Ports All units ship with a
Centronics parallel
printer port, RS-232,
and HP-IB as standard
_________________________
LAN Interface An Ethernet LAN inter-
_________________________
Software The HP B3740A Soft-
Analysis ware Analyzer provides
Capability true source line refer-
_________________________
equipment.
face is standard with
the HP 1670-series. The
LAN interface comes
with both Ethertwist
(10BASE-T) and
ThinLan (10BASE 2)
connectors.The LAN
supports FTP and
PC/NFS connection
protocols. It also works
with X11 window packages.
encing and symbol
download capabilities.
Standard object
module formats are
supported.
_________________________
Program- Each instrument is fully
mability programmable from a
computer via HP-IB
and RS-232 connections. This feature is
_________________________
HP Printer Printers which use the
Support HP Printer Control
_________________________
Alternate The Epson FX80, LX80
Printer and MX80 printers
Supported with an RS-232 or
_________________________
Hard Copy Screen images can be
Output printed in black and
_________________________
standard on all models.
Language (PCL) and
have a parallel
Centronics, RS-232 or
HP-IB interface are
supported: HP
DeskJet, LaserJet,
QuietJet, PaintJet, and
ThinkJet models.
Centronics interface
supported in the Epson
8-bit graphics mode.
white from all menus
using the
State or timing listings
can be printed in full or
part (starting from
center screen) using
the
Print All
Print
selection.
field.
Mass Storage Files
and Software
_________________________
Updating the The operating system
Operating resides in Flash ROM
System and can be updated
from the flexible disk
drive or the hard disk
_________________________
Mass Storage Is supported by an
_________________________
drive.
internal hard disk drive
and by a 1.44 Mbyte,
3.5-inch flexible disk
drive. Supports DOS
and LIF formats.
A disk drive provides
quick storage and
retrieval of files.
_________________________
Screen An image file of any display
Image Files scre encan be stored to
disk via the display's
Print
field. Black &
white TIFF, PCX,
Encapsulated
PostScript (EPS) , and
gray-scale TIFF file for-
_________________________
ASCII Data State or timing listings
Files can be stored as ASCII
_________________________
Configuration Logic analyzer files
and Data Files that include configura-
_________________________
Recording of Binary format
Acquisition configuration/data files are
and Storage stored with the time of
Times acquisition and the time of
_________________________
Acquisition Arming
_________________________
Initiation Arming is started by
_________________________
Cross Arming The analyzer machines
_________________________
Output An output signal is
_________________________
mats are available.
files on a flexible disk via
the display's
These files are equivalent
in character width and
line length to hardcopy
listings printed via the
Print All
tion and data informa-
tion (if present) are
encoded in a binary
format. They can be
stored to or loaded
from the hard disk drive
or a flexible disk.
storage.
Run
BNC.
can cross-arm each
other.
provided at the Port
Out BNC.
Print
selection.
or the Port In
field.
HP 1670-series
Logic Analyzer
Specifications and
Characteristics
_________________________
Port In/Out
_________________________
PORT IN Port In is a standard
Signal and BNC connection.
Connection The input operates at
TTL logic signal levels.
Rising edges are valid
_________________________
PORT OUT Port Out is a standard
Signal and BNC connection with
Connection TTL logic signal levels.
_________________________
Arming Times
_________________________
PORT IN 15 ns typical delay from
Arms Logic signal input to a
Analyzer [1]
_________________________
Logic 120 ns typical delay
Analyzer from logic analyzer
Arms PORT trigger to signal
OUT [1] output.
_________________________
Operating Environment
_________________________
Power 115 V ac or 230 V ac, –22%
_________________________
Temperature Instrument, 0°to 50°C
_________________________
Humidity Instrument, up to 95%,
_________________________
Altitude To 3,048 m (10,000 ft)
_________________________
Vibration: Random vibrations
Operating 5–500Hz,
_________________________
Vibration: Random vibrations
Non Operating5–500 Hz,10 minutes per
_________________________
input signals.
A rising edge is asserted as a valid output.
don't
care
logic analyzer
trigger .
to +10%, single phase,
48-66 Hz, 320 VA max
(+32°to 122°F). Disk
media, 10°to 40°C
(+50°to 104°F). Probes
and cables, 0°to 65°C
(+32°to 149°F)
relative humidity at
+40°C (+140°F). Disk
media and hard drive,
8% to 85% relative
humidity.
10 minute per axis,
~ 0.3 g (rms).
axis,~ 2.41 g (rms); and
swept sine resonant
search, 5–500 Hz,
0.75 g (0-peak),
5 minute resonant
dwell @ 4 resonances
per axis.
_________________________
Physical Factors
_________________________
Weight 28.6 lbs. (13 kg)
_________________________
Dimensions See figure 1
_________________________
Safety IEC 348/ HD 401,
UL 1244, and
CSA Standard C22.2
_________________________
EMC
CISPR 11:1990/EN 55011 (1991):
Group 1 Class A
IEC 801-2:1991/EN 50082-1 (1992):
4kV CD, 8 kV AD
IEC 801-3:1984/EN 50082-1 (1992):3V/m
IEC 801-4:1988/EN 50082-1 (1992): 1kV
_________________________
Weight 28.6 lb. (13kg)
Figure 1Figure 1
No. 231 (series M-89)
17.3 inches
(440 mm)
13.0 in.
(330 mm)
8.1 in.
(205 mm)
14.5 in.
(367 mm)
3
_________________________
Logic Analyzer Probes
_________________________
Input 100 kΩ ±2%
Resistance
_________________________
Input approx. 8 pF
Capacitance (see figure 2)
_________________________
RT= 250Ω
High Frequency Model for Probe Inputs
Figure 2
C
= 7.5 pF
COMP
RIN= 100kΩCTG= 1 pF Z0=
150Ω
_________________________
Minimum 500 mV peak-to-peak
Input Voltage
Swing
_________________________
Minimum 250 mV or 30% of input
Input amplitude, whichever is
Overdrive greater
_________________________
Threshold –6.0 V to +6.0 V in 50-mV
Range increments
_________________________
Threshold Threshold levels may be
Setting defined for pods
(17-channel groups) on
_________________________
Threshold ±(100 mV +3% of
Accuracy* threshold setting)
_________________________
Input ± 10 V about the
Dynamic threshold
Range
_________________________
Maximum ±40 V peak
Input Voltage
_________________________
+5 V 1/3 amp maximum
Accessory per pod
Current
_________________________
Channel Each group of 34
Assignment channels (a pod pair)
______________________________
[1] Time may vary depending upon the
mode of logic analyzer operation.
* Warranted Specification
an individual basis
can be assigned to
Analyzer 1, Analyzer 2
or remain unassigned.
Loading...