EN 55022; Class B Radiated (10m)
Test Header
Description: This is just a test.
Setup Name: EN 55022; Class B Radiated (10m) w/ Preamp
Customer Name: Any Customer
Project Number: 125A789
Operator Name: John Q. Customer
EUT Name: Santa Rosa 3U Ambients
Date Created: 9/21/99 1:21:10 PM
Date Modified: 9/21/99 1:21:10 PM
Equipment Table
Device Model Serial Number Last Cal Date Cal
Due Date
HP-E7401A HP-E7401A 5/20/99 2:58:37 PM
5/20/99 2:58:37 PM
HP 11966L; Coaxial Cable (Type-N) 5/20/99 3:46:23 PM
5/20/99 3:46:23 PM
HP 11909A; Preamplifier (9 kHz to 1 GHz) 6/8/99 9:55:44 AM
6/8/99 9:55:44 AM
HP 11956A; Log Periodic Antenna 6/8/99 9:59:41 AM
6/8/99 9:59:41 AM
Signal Paths
BiLog Path w/ Preamp
Receiver : HP-E7401A
Cable : HP 11966L; Coaxial Cable (Type-N)
PreAmp : HP 11909A; Preamplifier (9 kHz to 1 GHz)
Transducer : HP 11966P; Broadband Antenna
Log Periodic Path w/ Preamp
Receiver : HP-E7401A
Cable : HP 11966L; Coaxial Cable (Type-N)
PreAmp : HP 11909A; Preamplifier (9 kHz to 1 GHz)
Transducer : HP 11956A; Log Periodic Antenna
Biconical Path w/ Preamp
Receiver : HP-E7401A
Cable : HP 11966L; Coaxial Cable (Type-N)
Transducer : HP 11955A; Biconical Antenna
PreAmp : HP 11909A; Preamplifier (9 kHz to 1 GHz)
LISN 10A Path
Other Devices : HP 11947A; Transient Limiter
Receiver : HP-E7401A
LISN : HP 11967D; LISN (10 A)
Limit Lines
EN 55022; Class B Radiated (10m)
EN 55022; Class B Conducted, Average
Sweep Settings
Trace Name: 3U ambients
Use CISPR 16 Settings: Yes
Interpolation: Linear
Detector: Peak
Segment Overlap %: 20.000000
Number of Sweeps: 1
Receiver PreAmp: Yes
Video Average: No
Signal Path: Log Periodic Path w/ Preamp
Start Frequency: 300.000000 MHz
Stop Frequency: 1000.000000 MHz
RBW: Auto
VBW: Auto
Ref Level: Auto
Attenuation: Auto
Sweep Time: Auto
Segment Size: Auto
Input: RF Input
Measure Settings
Measure From List: Measure selected signals
Frequency search: Yes
Tune and listen: No
Prompt before measure: No
Update Signals: Always update signal
Signal Path: Log Periodic Path w/ Preamp
Receiver PreAmp: Yes
Autorange Sweep Time: 0.200000 sec
Peak Detector Settings
Quasi-peak Detector Settings
Dwell Time: 0.200000 sec
RBW: Auto
VBW: Auto
Attenuation: Auto
Dwell Time: 0.200000 sec
RBW: Auto
VBW: Auto
Attenuation: Auto
Current Graph
Loading...