Keysight N2169A
3000G X-Series Oscilloscope
Rack Mount Kit
Installation
Guide
Notices
CAUTION
WARNING
© Keysight Technologies, Inc. 2011, 2014,
2022
No part of this manual may be reproduced in
any form or by any means (including electronic storage and retrieval or translation into
a foreign language) without prior agreement
and written consent from Keysight Technologies, Inc. as governed by United States and
international copyright laws.
Manual Part Number
N2169-97000
Edition
First edition, February 2022
Printed in Malaysia
Published by:
Keysight Technologies, Inc.
1900 Garden of the Gods Road
Colorado Springs, CO 80907 USA
Warranty
The material contained in this document is
provided “as is,” and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted
by applicable law, Keysight disclaims all
warranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited
to the implied warranties of merchantability
and fitness for a particular purpose. Keysight shall not be liable for errors or for incidental or consequential damages in
connection with the furnishing, use, or performance of this document or of any information contained herein. Should Keysight
and the user have a separate written agreement with warranty terms covering the
material in this document that conflict with
these terms, the warranty terms in the separate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or subcontract, Software is delivered and licensed as
“Commercial computer software” as defined
in DFAR 252.227-7014 (June 1995), or as a
“commercial item” as defined in FAR 2.101(a)
or as “Restricted computer software” as
defined in FAR 52.227-19 (June 1987) or any
equivalent agency regulation or contract
clause. Use, duplication or disclosure of
Software is subject to Keysight Technologies’
standard commercial license terms, and
non-DOD Departments and Agencies of the
U.S. Government will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any technical data.
Safety Notices
A CAUTION notice denotes a hazard.
It calls attention to an operating
procedure, practice, or the like that,
if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood and
met.
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in personal
injury or death. Do not proceed
beyond a WARNING notice until the
indicated conditions are fully
understood and met.
2 3000G X-Series Oscilloscope Rack Mount Kit
In This Guide…
Support shelf assembly (1)
(includes pair of retaining
brackets for oscilloscope)
Sheet metal nut (4)
10-32 x 0.625 Phillips dress screw (4)
This guide contains instructions for installing the 3000G X-Series Oscilloscope
Rack Mount Kit. The rack mount kit provides a support shelf and hardware for
mounting Keysight 3000G X-Series oscilloscopes into Electronic Industries
Association (EIA) standard 19-inch (487-mm) rack cabinets.
The rack mount kit includes the following parts:
3000G X-Series Oscilloscope Rack Mount Kit 3
Here are the dimensions of the support shelf.
482.60 mm
19.00 in.
221.50 mm
8.72 in.
156.00 mm
6.142 in.
4 3000G X-Series Oscilloscope Rack Mount Kit
Loading...