P
Find us at www.keysight.com
Thi s info rmatio n is subjec t to change with out no tice. © Key sight Tech nolog ies, 2 020, Pu blishe d in USA, Septe mber 11, 2020, 3120-147 4.EN
Serial Bus Testing
Using Infiniium EXR-Series Oscilloscopes
Keysight’s Infiniium EXR-Series oscilloscopes have protocol-specific software
options that can trigger on and decode serial buses. Ensure that your electronic
devices are in accordance with today’s standards by testing and debugging
with an EXR-series scope.
Knowing what to order for your serial bus decode and triggering measurement
applications can be daunting, so we have simplified this task by summarizing the
following hardware and software options to consider for your Keysight Infiniium EXRSeries oscilloscope.
Suggested Oscilloscope and Hardware Options
EXR108A
1 GHz bandwidth, 8-channel oscilloscope
EXR2WAV
50 MHz arbitrary waveform generator
EXR2MSO
16 digital logic channels
EXR2MEM-001
100 Mpts/ch to 200 Mpts/ch acquisition memory upgrade
Suggested Software Options
D9010LSSP *
I2C, SPI, Quad-SPI, RS232/UART, JTAG, I2S, SVID, Userdefinable Manchester
D9010EMBP *
USB 2.0, USB-PD, 10/100 Mbps Ethernet
D9010USBP *
USB 2,0, eUSB2, Superspeed USB (5 Gbps)
D9010AUTP *
CAN/CAN FD, SENT
D9020AUTP
100BASE-T1 Automotive Ethernet
D9010MILP *
MIL-STD 1553, ARINC 429, SpaceWire
D9011BDLP
Basic Infiniium Protocol Trigger/Decode Bundle
(Includes all packages with asterisk (*) above)
For more information, contact an authorized distributor or go to www.keysight.com/find/exr
Serial Bus
Decoding
Serial buses are used
extensively in today’s
automotive, IoT,
consumer electronics
and telecommunication
fields.
Using the right set of
tools to test serial
buses is critical for
evaluating system
communication.
Loading...