Switch Mode Power Testing
Using Infiniium EXR-Series Oscilloscopes
Power analysis software in EXR-Series oscilloscopes provides quick and
easy automatic testing of inputs, outputs, efficiency, switching devices, and
frequency response analysis for your switch mode power supply (SMPS).
Knowing what to order for your switch mode power application can be daunting,
so we have simplified the task by suggesting the components you need to
perform power-related measurements with EXR-Series oscilloscopes.
Use the following hardware, software, probes, and accessories to perform your
SMPS measurements:
Suggested Oscilloscope and Hardware Options
EXR058A 500 MHz bandwidth, 8-channel oscilloscope
EXR2WAV 50 MHz arbitrary waveform generator
Suggested Software Options
D9010PWRA Power supply test software
D9010LSSP Low-speed protocol decode/trigger software
Suggested Probes and Accessories
U1880A Power measurement deskew fixture
N2790A 50:1/500:1, 100 MHz, high-voltage differential probe
10076C 100:1, 3.7 kV-peak, 500-MHz high-voltage probe
N7026A 150 MHz high-sensitivity current probe
Switch Mode Power
Switch mode power
supplies have surpassed
linear power supplies
by their efficiency and
functionality, as well as
their convenient size.
Switch mode power
analysis allows a multitude of power related
measurements such as
input analysis, switching
analysis, output analysis
and frequency response
analysis.
For more information, contact an authorized distributor or visit:
www.keysight.com/find/exr
Find us at www.keysight.com
This information is subject to change without notice. © Keysight Technologies, 2020, Published in USA, September 10, 2020, 7120-1261.EN
Page 1
Loading...