How it Works
Keysight
Loading...
E7590A
Configuration Guide
47 pgs3.09 Mb0
Installation Guide
6 pgs594.23 Kb0
Users Manual
38 pgs1.59 Mb0

Keysight E7590A Configuration Guide

Download
Find us at www.keysight.com Page 1
Enclosure Solutions
Rack Cabinets, Accessories, and Rackmount Kits
Find us at www.keysight.com Page 2
Table of Contents
Keysight Rack Features ............................................................................................................................ 5
Keysight Rack Value ............................................................................................................................. 6
Load a Rack in Less Time ..................................................................................................................... 6
Rack Systems Fast and Easily.............................................................................................................. 7
Use Vertical Space Efficiently ............................................................................................................... 7
Manage Power Requirements............................................................................................................... 7
Protect from Heat Buildup ..................................................................................................................... 7
Secure Instruments During Test ........................................................................................................... 7
Move Racks Easily ................................................................................................................................ 7
Enhance Stability .................................................................................................................................. 8
Improve Cable Management ................................................................................................................. 8
Rack Chracteristics and Specifications ..................................................................................................... 9
Power Distribution Units .......................................................................................................................... 11
E7590A Configurations ........................................................................................................................... 12
Included with the E7590A ................................................................................................................... 13
E3661B and E3662B Configurations ...................................................................................................... 14
Included with the E3661B and E3662B .............................................................................................. 15
Multi-Bay System Configurations ............................................................................................................ 16
Multi-bay System Tie Kits .................................................................................................................... 17
Rack Ordering Information ...................................................................................................................... 17
Rear Doors .............................................................................................................................................. 18
Rear Door Characteristics and Specifications .................................................................................... 19
Extractor Fans ......................................................................................................................................... 19
Drawers ................................................................................................................................................... 20
Drawer Characteristics and Specifications ......................................................................................... 21
Stationary Shelf ....................................................................................................................................... 21
Stationary Shelf Characteristics and Specifications ........................................................................... 22
Sliding Shelf ............................................................................................................................................ 23
Sliding Shelf Characteristics and Specifications ................................................................................. 23
Work Surface........................................................................................................................................... 24
Work Surface Characteristics and Specifications ............................................................................... 24
Ballast ...................................................................................................................................................... 24
Ballast Characteristics and Specifications .......................................................................................... 25
Find us at www.keysight.com Page 3
Rack Accesories Ordering Information ................................................................................................... 25
Retractable Keyboard Kit
.......................................................................................................................... 26
Retractable Keyboard Kit Characteristics and Specifications ............................................................. 26
Fixed Keyboard Kit .................................................................................................................................. 27
Fixed Keyboard Kit Characteristics and Specifications ...................................................................... 27
Keyboard Rackmount Kit Ordering Information ...................................................................................... 27
Instrument Compatibility with Racks ....................................................................................................... 28
Mounting Other Instruments ................................................................................................................ 29
Handles and Rackmount Flange Kits ...................................................................................................... 29
Front Handle Kit .................................................................................................................................. 30
Rackmount Flange Kits ....................................................................................................................... 31
Flange Kits with Handles ..................................................................................................................... 31
Rackmount Flange Kit for Instruments with Previously Supplied Handles ......................................... 32
Selecting a Rackmount Flange or Handle Kit ..................................................................................... 32
Rackmount Adapter Kits ......................................................................................................................... 33
Selecting a Rackmount Adapter Kit .................................................................................................... 34
Support Shelf .......................................................................................................................................... 35
Support Shelf Characteristics and Specifications ............................................................................... 35
Lock Link Kits and Locking Feet Kits ...................................................................................................... 36
Rail and Slide Kits ................................................................................................................................... 37
Slide Kits ................................................................................................................................................. 38
End Brackets ....................................................................................................................................... 39
Rack Filler Panels ................................................................................................................................... 39
IEC-320 Female-Male Power Cables ..................................................................................................... 40
Rackmount Accessory Ordering Information .......................................................................................... 40
Testmobile Benefits ................................................................................................................................. 41
Add mobility to your instruments ......................................................................................................... 41
Bring the equipment to the test ........................................................................................................... 41
Share expensive instruments .............................................................................................................. 41
Protect your investment ...................................................................................................................... 41
Use instruments with ease .................................................................................................................. 41
Testmobile Key Features ........................................................................................................................ 42
Testmobile Cart Selection Criteria .......................................................................................................... 42
Find us at www.keysight.com Page 4
Testmobile Scope Cart, 1180CZ ............................................................................................................. 42
Testmobile System Cart, 1181BZ ........................................................................................................... 43
Testmobile Characteristics and Specifications ....................................................................................... 44
Enhance Instrument Output .................................................................................................................... 45
Testmobile Work Surface .................................................................................................................... 45
Testmobile Work Surface Characteristics and Specifications ............................................................ 45
Testmobile Printer/Plotter Stand ......................................................................................................... 46
Testmobile Printer/Plotter Stand Characteristics and Specifications .................................................. 46
Testmobile Accessories Selection Chart ............................................................................................ 47
Find us at www.keysight.com Page 5
Rack Solutions for Keysight Systems
Keysight Technologies offers 19-inch EIA (Electronics Industries Association) rack cabinets tailored to meet the needs of test and measurement instrumentation customers. Rack mounting is fast and easy with unique design features. A selection of options and accessories provides flexibility to meet the requirements of most racking applications
.
Keysight Rack Features
•
Vented top and rear door (with lock)
•
Solid base
•
Leveling screws
•
Retractable anti-tip foot
•
4 Concealed lifting hooks. Each hook can support 227 kg (500 lbs)
•
One Keysight System II rail kit, including a pair of rails
•
3-Inch heavy duty casters
•
Power distribution Unit (PDU) – must specify 110 V or 220 V
•
Easy to remove side panels
Figure 1. The E3661B (32 EIA), E7590A (25 EIA), E3662B (41 EIA) standard rack cabinets
Find us at www.keysight.com Page 6
Keysight Rack Value
Keysight racks have been designed and engineered to save you time and money
•
Limited assembly required: Keysight ships racks fully assembled and ready for equipment installation
saving time and money. Accessories can be ordered and will be shipped ready to be integrated onto the rack. (see Figure 1).
•
Fast startup: Designed for easy unloading from the pallet.
•
Pallet re-use: Racks are sent out with double pallets, as well as a ramp. Racks can be integrated on
the pallet, which adds a convenient system for integrating the rack. The pallet has been tested up to 1000 pounds and can also be used to ship an integrated system.
•
Unique column and rail design: Equipment installation time is cut in half because of Keysight’s unique
column and support rail design. Our special cutouts in the columns, spaced at EIA intervals and rail hooks assure instruments are mounted easily in the right place
•
Designed for Keysight Instruments: Keysight racks are specifically designed for Keysight’s test and
measurement equipment, virtually ensuring a perfect fit. They will also accommodate non-Keysight equipment making them suitable for a mixed instrument environment.
Load a Rack in Less Time
The design of Keysight support rails can cut in half the time required to install equipment in a rack. The rails hang on discrete slots on the vertical mounting columns, corresponding to each EIA unit in the rack. Vertical adjustment between instruments is minimized by selecting the proper rail. Rails are available for Keysight System II instruments and for flat bottom instrument chassis (see page 36). The system was specifically designed to minimize the time required to install instruments.
Figure 2. Keysight Column and Rail Design
Find us at www.keysight.com Page 7
Rack Systems Fast and Easily
Racks are shipped with all basic materials assembled. No time is lost preparing a rack with basic assembly. Accessories, kits and supplementary small parts are shipped separately, as ordered, and are ready for immediate configuration.
More than just a way of storing instruments, the racks reflect Keysight’s reputation for quality and design.
A sturdy frame provides structural integrity, which allows lightweight, easy-to-lift off side panels that allow for installation and easy access to equipment and cables. Rails are placed into keyed slots in the vertical columns, resulting in quick and accurate positioning.
Use Vertical Space Efficiently
Vertical space within a rack is measured in industry-standard EIA units, where 1 EIA unit = 1.75 inches (44.5 mm). Equipment height is also specified in EIA units. System configuration is made easier by counting EIA units from the base of the rack. A seamless fit of instrument and rail is ensured.
Manage Power Requirements
A power management system must be ordered. Option AW3 (110 V) or option AW5 (220 V). It is vertically mounted behind the rack rear column and supplies power to the cabinet. An illuminated master switch, which is conveniently located on the front of the rack, provides easy access to turn the power on and off to the Power Distribution Unit (PDU) outlets.
To completely remove power from the PDU and the rack system, the PDU power cord needs to be removed electrical system, or if the rack system is connected to a dedicated circuit breaker, the breaker needs to be opened.
Protect from Heat Buildup
It is important for racks to efficiently dispose of heat. Instruments increasingly generate more heat, and in a compact rack mounted system the heat buildup can be detrimental to the system. System-generated heat is removed by natural convection through a ventilation path incorporated in the roof of the racks. The vented rear door also helps reduce the heat captured within the rack. For greater heat dissipation, an optional top-mounted extractor fan is available. (see page 18)
Secure Instruments During Test
Both the rear door and the optional Plexiglas front door can be locked to secure against disruption of tests or unauthorized removal of system components. The symmetrical rear door design allows it to be mounted for opening to either left or right, useful for multi-bay configurations.
Move Racks Easily
Each rack is provided with four 3-inch diameter, smooth-rolling, heavy-duty casters to facilitate moving racks over short distances. Four lifting hooks conveniently concealed in the top of the rack allow for transport, even when fully loaded. Each hook can support 227 kg (500 lbs) to easily handle the maximum recommended gross weight for a loaded rack of 816 kg (1800 lbs).
Find us at www.keysight.com Page 8
Enhance Stability
An optional front mounted retractable anti-tip stabilizer that can be extended into place with ease is standard on all racks. It provides temporary anti-tip capability for slide mounted products when they are in their extended position.
Improve Cable Management
Keysight racks have an additional 100 mm of internal space that is available at the rear of the rack. This convenient space is available for the installation of power distribution units (PDUs) and cables, which are routed out the bottom of the rack.
Figure 3. Exploded view of standard rack.
Find us at www.keysight.com Page 9
Rack Chracteristics and Specifications
General Characteristics
Casters rating
318 kg (700 lbs) each, 816 kg (1800 lbs) total Casters have a point contact convex cross section
Lift hook rating
227 kg (500 lbs) each Total system and cabinet weight is a maximum 816 kg (1800 lbs), static. Lift cabinet using all four (4) hooks.
Rack material
Frame/columns: 13 Ga. cold rolled steel. Side Panels: 18 Ga. cold rolled steel.
Exterior Rack Dimensions
Model
Dim1
Height
Width
Depth
E7590A A
1320 mm (51.9 in)
600 mm (23.6 in)
905 mm (35.6 in)
C
120.8 mm (4.8 in)
E3661B A
1620 mm (63.8 in)
600 mm (23.6 in)
905 mm (35.6 in)
C
131.8 mm (5.2)
E3662B A
2020 mm (79.5 in)
600 mm (23.6 in)
905 mm (35.6 in)
C
131.8 mm (5.2 in)
Interior Rack Dimensions
Model
Dim1
Height
Width
Depth
EIA Rack
units
E7590A
B
1111.25 mm (43.8 in)
450.8 mm (17.8 in)
851 mm (33.5 in)
25
E3661B
B
1422.5 mm (56.0 in)
450.8 mm (17.8 in)
851 mm (33.5 in)
32
E3662B
B
1822.5 mm (71.8 in)
450.8 mm (17.8 in)
851 mm (33.5 in)
41
1
See Figure 4.
Find us at www.keysight.com Page 10
Figure 4. Rack dimensions
Rack Weight and Load Ratings
Model
Weight
Load capacity
E7590A
89 kg (196 lbs) empty
816 kg (1800 lbs)
E3661B
100 kg (221 lbs) empty
816 kg (1800 lbs)
E3662B
116 kg (255 lbs) empty
816 kg (1800 lbs)
Find us at www.keysight.com Page 11
Power Distribution Units
Factory installed PDUs are available in a 100-120 V North American configuration (AW3) or a 200-240 V International configuration (AW5). The power distribution unit conveniently supplies power to equipment mounted in the rack.
PDUs mount vertically behind the rear column and do not reduce the mounting space in the rack. Factory installation includes the specified PDU and a lighted, low-voltage power switch mounted in the rack’s forehead bezel.
A lighted master power switch (Figure 6) is supplied with the PDU. The switch
controls a relay in 1 or 2 PDUs. The system’s power can be conveniently
switched on and off using the master switch. The switch also provides rapid system shutdown in case of emergency. Supplemental circuit breakers are provided on both hot (live) and neutral lines.
•
All PDUs are single phase.
•
A maximum of two PDUs can be installed in one rack.
•
The top receptacle of all PDUs is configured as IEC-320 and is intended for the extractor fan. It can
be used for other purposes if no fan is installed.
•
Keysight offers various power cords. See the power cord selection to select the power cord that is
appropriate for your location and rack solution.
Figure 5. Power distribution units Figure 6. Low voltage safety switch
Rack Configuration Hint
You must specify a
PDU option. See pages
12 and 14 for PDU details.
Find us at www.keysight.com Page 12
E7590A Configurations
Solid side panels and a lockable vented rear door are standard equipment on the Keysight E7590A (1.3 m, 25 EIA Units) rack cabinet. To provide better value and save integration time, choose a variety of power distribution unit (PDU) options. Choose the PDU option you want, and your rack will arrive fully assembled and ready for use.
Figure 7. E7590A 1.3 m Rack
Find us at www.keysight.com Page 13
E7590A Factory Installed PDU Options
PDUs include Forehead bezel with lighted switch, supplemental circuit
breakers, IEC-320 upper receptacle for fan or other use.
North American PDU (option AW3) – Meets UL/CSA standards
Voltage
100-120 V, 15 A
Receptacles
1 IEC-320 C-13 and 5 NEMA 5­15R
Power cord
2 m cord with 5-20P non-locking plug
International PDU (option AW5) - Meets IEC-950 and VDE Standards
Voltage
200-240 V, 15 A
Receptacles
6 IEC-320 C-13 Power cord
2 m cord with no plug (user installs plug)
Included with the E7590A
•
Rack cabinet (assembled with vented, lockable rear door
•
2 removable side panels, vented top, solid base)
•
Leveling screws Retractable anti-tip foot
•
Four, 3-inch heavy duty casters
•
One set of Keysight instrument rails
•
Factory installed PDU (110 V option AW3 or 220 V option AW5)
•
Forehead bezel with lighted safety switch
Find us at www.keysight.com Page 14
E3661B and E3662B Configurations
The Keysight E3661B (1.6 m, 32 EIA Units) and E3662B (2.0 m, 41 EIA Units) rack cabinets have a variety of options. Each rack is delivered fully assembled and ready to use. Each rack comes with sides, vented rear door, and one PDU (either 110 V or 220 V).
Figure 8. E3661B 1.6 m Rack
Rack Configuration Hint
1.6M and 2 m racks come with vented rear doors. Solid doors are available, see page 17 for details.
Find us at www.keysight.com Page 15
E3661B and E3662B Factory Installed PDU Options
PDUs include Forehead bezel with lighted switch, supplemental circuit breakers, IEC-320 upper receptacle for fan or other use.
North American PDU (option AW3) – Meets UL/CSA standards
Voltage
100-120 V, 15A
Receptacles
1 IEC-320 C-13 and 9 NEMA 5­15R
Power cord
2 m cord with 5-20P non-locking plug
International PDU (option AW5) – Meets IEC-950 and VDE Standards
Voltage
200-240 V, 15 A
Receptacles
10 IEC-320 C-13 and 1 IEC-320 C19
Power cord
2 m cord with no plug (user installs plug)
Included with the E3661B and E3662B
•
Rack cabinet (assembled with vented, lockable rear door, 2 removable side panels, vented top, solid
base)
•
Leveling screws Retractable anti-tip foot
•
Four, 3-inch heavy duty casters
•
One set of Keysight instrument rails
•
Factory installed PDU (110 V option AW3 or 220 V option AW5)
•
Forehead bezel with lighted safety switch
Find us at www.keysight.com Page 16
Multi-Bay System Configurations
Keysight tie kits allow you to create multi- bay solutions. These kits connect rack columns and provide clearance for front and rear door operation. Start by filling in the configuration guide (left) and then select the kits for your application.
Figure 9. Double-bay configuration
Find us at www.keysight.com Page 17
Multi-bay System Tie Kits
Tie kits include cosmetic panels which connect and finish the front, rear and top of adjacent racks. Order one kit for each pair of racks to be joined.
Figure 10. Tie kit for each pair of racks to be joined
Rack Ordering Information
Rack model
Description
E7590A
1.3 m Rack Cabinet, 25 EIA units - For Americas orders only
E7590AA
1.3 m Rack Cabinet, 25 EIA units - For orders In Asia, Japan, and Australia
E7590AE
1.3 m Rack Cabinet, 25 EIA units - For European orders only
E3661B
1.6 m Rack Cabinet, 32 EIA units - For Americas Orders Only
E3661BA
1.6 m Rack Cabinet, 32 EIA units - For orders In Asia, Japan, and Australia
E3661BE
1.6 m Rack Cabinet, 32 EIA units - For European orders only
E3662B
2.0 m Rack Cabinet, 41 EIA units - For Americas orders only
E3662BA
2.0 m Rack Cabinet, 41 EIA units - For orders In Asia, Japan, and Australia
E3662BE
2.0 m Rack Cabinet, 41 EIA units - For European orders only
Must Order PDU Option
Description
Option AW12
Rack with NO doors, NO side panels, NO PDU. Quartz gray.
Option AW3
100-120 Volts North America PDU; includes rear door and side panel
Option AW5
200-240 Volts International PDU; includes rear door and side panel
Accessories
E4468BZ
1.6 m Tie Kit
E7792AZ
2.0 m Tie Kit
E7685AZ
PDU Installation Kit w/Bezel
E4451-670003
1.3 m PDU 100-120 V
E4453-670003
1.3 m PDU 200-240 V
E4455-670003
1.6 m and 2.0M PDU 100-120 V
E4457-670003
1.6 m and 2.0M PDU 200-240 V
2
If option AW1 is ordered, accessories such as doors and PDUs must be ordered and installed separately.
3
E7685AZ PDU Install Kit is required for mounting a PDU in a bare rack.
Find us at www.keysight.com Page 18
Rack Accessories
Rear Doors
Standard racks include vented rear doors which can be replaced with a solid door. Features of the rear door kit include:
•
Doors can be installed to hinge on either the left or right side for maximum flexibility.
•
Easy customer installation.
•
All necessary mounting hardware.
•
Lockable for access security.
Mounting hardware is included with the rear door. However, you may also purchase a separate rear door hinge if desired (see p/n C2786-00012C).
Figure 11. Solid and vented rear doors (E4476-67000, E4477-67000)
Find us at www.keysight.com Page 19
Rear Door Characteristics and Specifications
Characteristic
E4476-67000
E4478-67000
E4477-67000
E4479-67000
Type
Non-vented
Non-vented
Vented
Vented
Material
Cold-rolled steel
Cold-rolled steel
Cold-rolled steel
Cold-rolled steel
Weight
15.4 kg (34 lbs)
21.3 kg (47 lbs)
14.1 kg (31 lbs)
20 kg (44 lbs)
Color
Quartz gray
Quartz gray
Quartz gray
Quartz gray
Height
1425.6 mm (57.2 in)
1852.7 mm (72.9 in)
1425.6 mm (57.2 in)
1852.7 mm (72.9 in)
Width
599 mm (23.6 in)
599 mm (23.6 in)
599 mm (23.6 in)
599 mm (23.6 in)
EIA Units
32
41
32
41
Extractor Fans
Extractor fans are used to increase air flow through the rack cabinet. Keysight’s fan improves natural convection cooling by increasing the airflow in the rack. Use of the fan enhances the movement of warm air from the bottom of the rack up and out through the vented top cap, providing cooling to the entire length of the rack. The customer installable extractor fan mounts easily under the top cap into the top frame of the rack. It moves air at 342 cubic meters per hour (200 cubic feet per minute). The fan does not reduce the space available for rack mounting instruments.
•
Fans are highly recommended for racks with a front door.
•
One fan per rack.
•
Select an appropriate fan that fits your local AC voltage.
•
Fans plug into the upper IEC 320 outlet on PDU.
Figure 12. Rack extractor fans
Rack Configuration Hint
Use extractor fans when rack internal temperatures are 15 °C (27 °F) above ambient.
Find us at www.keysight.com Page 20
Extractor Fans Characteristics and Specifications
Extractor Fan Characteristics
Extractor Fan Dimensions
Airflow
200 cfm
Acoustic noise
43 dB
AC input (50-60 Hz)
E4470AZ: 100/120 V E4471AZ: 200/240 V
AC current
1 A maximum
Material
Cold-rolled steel
Weight
3.6 kg (8 lbs)
Color
Quartz gray
Drawers
Mount a drawer in the rack to keep manuals or spare cables close to where they are needed. Two drawer sizes are available. Sliding rails and mounting hardware are included.
Figure 13. Drawer accessory
Find us at www.keysight.com Page 21
Drawer Characteristics and Specifications
Figure 14. Drawer dimensions
Drawer characteristics
35181J
35181M
Material
Cold-rolled steel
Cold-rolled steel
Weight
7.26 kg (16 lbs)
8.16 kg (18 lbs)
Color
Quartz gray
Quartz gray
EIA Units
2
3
Stationary Shelf
The stationary shelf can be used in all standard Keysight racks. The stationary shelf is mounted securely into place using the supplied hardware and is designed to sit at the bottom of the EIA increment.
Features of the stationary shelf include:
•
Snap-in design for easy installation
•
Smooth edges
Rack Configuration Hint
Use a stationary shelf when equipment does not have a rack mount kit.
Find us at www.keysight.com Page 22
Figure 15. J1520AC Stationary Shelf
Stationary Shelf Characteristics and Specifications
J1520AC Shelf Characteristics
Material
Cold-rolled steel
Weight
8 kg (17.6 lbs)
Color
Quartz gray
EIA units
1
Load capacity
68 kg (150 lbs)
Length
733 mm (28.86 in)
Height
44 mm (1.73 in)
Width
482.6 mm (19 in)
Inside width
441 mm (17.375 in)
Find us at www.keysight.com Page 23
Sliding Shelf
The sliding shelf provides a flat surface with full product accessibility. It can be used in all Keysight racks to support equipment that may not have its own rackmount kit. The shelf and slides are preassembled for easy installation.
Features of the sliding shelf include:
•
Snap-in design for easy installation
•
Smooth edges
Consider purchasing the steel ballast (C2790AC) to use with the sliding shelf. The ballast provides anti-tip capability when the shelf is extended.
Figure 16. J1526AC sliding shelf Figure 17. Sliding shelf installed in a rack
Sliding Shelf Characteristics and Specifications
J1526AC Shelf Characteristics
Material
Cold-rolled steel
Weight
9.9 kg (22 lbs)
Color
Quartz gray
EIA Units
2
Load capacity
68 kg (150 lbs)
Length
674 mm (26.55 in)
Height
44.5 mm (1.75 in)
Width
482.6 mm (19 in)
Inside Width
413 mm (16.25 in)
Find us at www.keysight.com Page 24
Work Surface
The work surface is stationary and is designed to remain securely in place. The work surface provides a convenient work shelf
utility area at the front of the rack. It can be used as a writing space or to hold accessories.
Consider purchasing the steel ballast (C2790AC) to use with the work surface. The ballast provides anti-tip capability.
Figure 18. 46298SZ work surface Figure 19. Work surface installed in a rack
Work Surface Characteristics and Specifications
46298SZ Work Surface Characteristics
Work Surface Dimensions
Material
Cold-rolled steel
Weight
12.7 kg (28 lbs)
Color
Quartz gray
EIA units
2
Load capacity
22.7 kg (50 lbs)
Ballast
The ballast kit includes a 30-pound weight to provide anti-tip protection. Ballast deters the cabinet from tipping forward if heavy slide-mounted devices are extended from the rack.
Keysight rack cabinets include a standard, pull-out anti-tip foot that can be extended temporarily for servicing. Ballast provides an extra margin of safety to counteract the extra weight incurred when an accessory extends from the rack, such as a work surface.
Find us at www.keysight.com Page 25
Ballast features:
•
Each ballast kit contains a 30 lb. ballast and mounting hardware.
•
The ballast mounts on the rear columns of the rack and provides a
counterweight for equipment that extends out from the front of the rack.
Ballast should be employed when using the following rack accessories:
•
Slide mounted instruments
•
Work surface
•
Monitor
•
Keyboard
Ballast Characteristics and Specifications
C2790AC Ballast Characteristics
Ballast Dimensions
Material
Cold-rolled steel
Weight
13.6 kg (30 lb)
Color
Quartz gray
Rack Accesories Ordering Information
Accessories
E4476-67000
Solid rear door for 1.6 m rack
E4477-67000
Vented rear door for 1.6 m rack
E4478-67000
Solid rear door for 2.0 m rack
E4479-67000
Vented rear door for 2.0 m rack
C2786-00012C
Rear door hinge
E4470AZ
Extractor fan 100-120 Volt
E4471AZ
Extractor fan 200-220 Volt
35181J
Storage drawer, 3.5”
35181M
Storage drawer, 5.25”
J1520AC
Stationary Shelf
J1526AC
Siding Shelf
46298SZ
Work Surface
C2790AC
Ballast, 30 lb steel, fits all rack heights
Rack Configuration Hint
Always mount ballast in
the rear of the rack. Racks should not be shipped with ballast installed.
Find us at www.keysight.com Page 26
Keyboard and Mouse Rack Mount Kits
Select a fixed or retractable keyboard and mouse kit appropriate for you needs (keyboard and mouse not included). Consider purchasing the ballast kit for added stability (C2790AC).
Retractable Keyboard Kit
Keysight’s compact shelving kit provides a convenient enclosed keyboard system that requires minimum rack space, saving valuable space for your instruments.
The kit can accommodate any standard keyboard and mouse. The retractable keyboard shelf slides into the rack when not in use. When retracted, the shelf does not extend from the rack. Keyboard security is available by using a front door on the rack cabinet. The keyboard kit includes all mounting hardware.
Figure 20. Retractable keyboard kit
Figure 21. Keyboard when retracted
Figure 22. Extended keyboard
Retractable Keyboard Kit Characteristics and Specifications
J1518AC Retractable Keyboard Characteristics
Retractable Keyboard Dimensions
Material
Cold-rolled steel
Weight
12.9 kg (28.5 lbs)
Color
Quartz gray
EIA Units
2
Find us at www.keysight.com Page 27
Fixed Keyboard Kit
The keyboard kit includes all mounting hardware. In an environment where the keyboard is not required to retract, a fixed keyboard shelf is available. The fixed keyboard shelf mounts on the outside of the front rack columns.
Figure 23. Fixed keyboard rackmount kit Figure 24. Fixed keyboard mounted in a rack
Fixed Keyboard Kit Characteristics and Specifications
E7714AC Fixed Keyboard Characteristics
Fixed Keyboard Dimensions
Material
Cold-rolled steel
Color
Quartz gray
EIA Units
1
Keyboard Rackmount Kit Ordering Information
Accessories
J1518AC
Retractable keyboard kit, fits all racks
E7714AC
Fixed keyboard kit, fits all racks
Rack Configuration Hint
The fixed keyboard cannot be used with a front door installed on
the rack.
Find us at www.keysight.com Page 28
Instrument Rackmount Kits
Instrument Compatibility with Racks
Keysight’s modular cabinet system offers bench-stacking and rack-mounting versatility. These cabinets are designed for compatibility with EIA and IEC standards, both in width and height. Modular cabinets are currently defined as System II instruments and are available in standard sizes. As shown in Figure 25, instrument depths have 5 sizes and instrument heights have 6 sizes. They are measured in millimeters and inches.
Figure 25. System II instrument sizes
Find us at www.keysight.com Page 29
The instrument width is measured in module width (MW). The module width measurement is an important feature for determining rackmounting requirements. 1 MW is equivalent to the full width of the rack.
Most equipment can be ordered with handles and flanges at the time the equipment is ordered. If you have an instrument without the necessary hardware, then use the following pages to add flanges and handles.
Mounting Other Instruments
Some Keysight instruments are use non- System II cabinets. These products typically have rack-mounting options. See the specific product’s data sheet for those details.
Non-Keysight instruments that comply with the industry-standard units may be easily rack-mounted as well.
Handles and Rackmount Flange Kits
Handles and rack flanges are available for all System II cabinets. They find most use on full width modules or combinations of narrower modules locked together to form one module width (MW). See page 27 for information about module widths and instrument heights and depths.
Flanges secure the instrument to the front mounting column of the rack. All Keysight flange kits attach to the instrument using pre-existing holes in the instrument case. Flanges alone will not support the weight of an instrument in the rack. The appropriate rails or slides must be purchased for support.
Some instruments are supplied with front handles as part of the selling price. Handles and rack flanges can be supplied with most other instruments for an added cost by specifying the appropriate option at the time of order.
Alternatively, the equivalent mounting hardware may be ordered after receipt of the instrument. Options include (refer to Figure 26):
•
Front handle kit (A)
•
Rackmount flange kits (B)
•
Handles with rack flanges (C)
•
Flange kit for instruments with previously supplied handles (D)
Rack Configuration Hint
Keysight rackmount kits include metric fasteners. Instruments compatible with metric fasteners are identified
with a “metric”
embossment in the front bezel casting under the plastic trim strip and on the middle of the rear bezel casting.
Rack Configuration Hint
The rackmount flange kits secure your instrument to the front columns of the rack. You must also select the appropriate rails or slides to support the weight of the instrument in the rack. See pages 36 and 37 for rail and slide information.
Find us at www.keysight.com Page 30
Figure 26. Handle and Flange kits
Front Handle Kit
Order a front handle kit when your instrument does not come with pre-installed handles. Check to make sure your instrument requires handles, as many instruments are supplied with previously installed handles. Flanges attach to pre-existing holes in the instrument case.
Figure 27. Front handle Kit
Find us at www.keysight.com Page 31
Rackmount Flange Kits
Flange kits are available for all System II instruments. Flanges attach to pre-existing holes in the instrument case. These flanges do not have a notch for handles, and therefore cannot be used for instruments that have handles. Flanges attach to pre-existing holes in the instrument case.
Figure 28. Rackmount flange kit
Flange Kits with Handles
This kit includes both flanges and handles. Flanges attach to pre-existing holes in the instrument case.
Figure 29. Rackmount flange and handle kit
Find us at www.keysight.com Page 32
Rackmount Flange Kit for Instruments with Previously Supplied Handles
Certain Keysight instruments are supplied with front handles. These flange kits have a special cut out to accommodate the handles. Flanges attach to pre-existing holes in the instrument case.
Figure 30. Rackmount flange kit for instruments with previously supplied handles
Selecting a Rackmount Flange or Handle Kit
The following tables list the kits available for use after receipt of the equipment. Field installation is straightforward.
•
A plastic trim strip is easily removed, and the handle or flange attaches
with screws supplied in the kit.
•
Before rack-mounting, bottom feet must be removed.
Rackmount Kits (New Phantom Gray Color)
Instrument Height
Front Handle Kit
(A)
Rackmount Flange
Kit (B)
Flange Kit with
Handles (C)
Flange Kit for Previously
Supplied Handles (D)
88.1 mm (3.5 in)
1CN106A
1CM107A
1CM111A
1CM122A
132.6 mm (5.25 in)
1CN107A
1CM104A
1CP108A
1CM104A
177.0 mm (7.0 in)
1CN103A
1CM113A
1CP105A
1CM127A
221.5 mm (8.75 in)
1CN105A
1CM115A
1CP120A
1CM143A
265.9 mm (10.5 in)
1CN120A
1CM142A
1CP119A
1CM136A
310.4 mm (12.25 in)
NA
1CM133A
1CP122A
1CM138A
Find us at www.keysight.com Page 33
Rackmount Kits (Legacy Quartz Gray Color)
Instrument Height
Front Handle
Kit (A)
Rackmount Flange Kit
(B)
Flange Kit with Handles
(C)
Flange Kit for
Previously Supplied
Handles (D)
88.1 mm (3.5 in)
1CN006A
34191A/5063-92124
1CP001A/5063-92205
5063-92326
132.6 mm (5.25 in)
1CN007A
34192A
1CP008A
NA
177.0 mm (7.0 in)
1CN003A
1CM013A
1CP005A
1CM034A
221.5 mm (8.75 in)
1CN005A
1CM015A
1CP020A
1CM043A
265.9 mm (10.5 in)
1CN020A
1CM042A
1CP019A
5063-9237
310.4 mm (12.25 in)
NA
1CM033A
5062-9225
NA
Rackmount Adapter Kits
Rackmount adapter kits are available to mount an instrument, or combination of instruments, that is less than one full module width (MW).
•
Individual 1/4 MW or 1/2 MW modules use these kits
•
Combinations of 1/4 MW or 1/2 MW (of equal depth) are first joined side-by- side with the Lock Link
Kit (see page 35). Combinations joined side-by-side must be the same depth and height. Then the rackmount adapter kit is applied. If modules are of unequal depth or height, a support shelf (as shown on page 34) can be used.
•
For combinations of instruments adding to 1 MW, use the rackmount flange kit (see Selecting a
Rackmount Flange or Handle Kit, page 30.
•
Hole patterns conform to EIA and IEC standards.
4
Includes standard flanges with 1.75-inch hole spacing.
5
Includes special flange with 3-inch hole spacing.
6
Will not fit onto instruments with previously supplied handles.
Figure 31. Rackmount adapter kits
Find us at www.keysight.com Page 34
Figure 32. Example rackmount adapter kits
Selecting a Rackmount Adapter Kit
Rackmount Adapter Kits (New Phantom Gray Color)
Instrument Height
Mounts ¼ MW
Modules (A)
Mounts ½ MW or two each ¼
MW7 modules (B)
Mounts ¾ MW (3 each ¼ MW8 or ¼
and ½ MW side-by-side) (C)
88.1 mm (3.5 in)
NA
1CM124A
1CM119A
132.6 mm (5.25 in)
NA
1CM116A
NA
177.0 mm (7.0 in)
NA
NA
NA
Rackmount Adapter Kits (Legacy Quartz Gray Color)
Instrument Height
Mounts ¼ MW
Modules (A)
Mounts ½ MW or two each ¼
MW7 modules (B)
Mounts ¾ MW (3 each ¼ MW8 or ¼
and ½ MW side-by-side) (C)
88.1 mm (3.5 in)
5063-9239
34190A
1CM019A
132.6 mm (5.25 in)
NA
34193A
NA
177.0 mm (7.0 in)
NA
5063-9245
NA
7
Side-by-side modules of equal depth require a Lock Link Kit (see page 35).
8
¼ MW can be center mounted using two of these kits.
Find us at www.keysight.com Page 35
Rackmount Accessories
Support Shelf
These shelves are available for instruments less than 1 MW.
•
Submodules of differing heights, widths, and depths (up to 20 inches
deep) can be rack-mounted using these support shelves. Any combination of 1/4 MW and 1/2 MW will fit side-by-side up to 1 MW.
•
The slide kit (PN 1494-0015) is required for installation of the support
shelf. It provides ready access to internal shelf areas. The slide kit includes brackets and mounting hardware.
Figure 33. Support Shelf and slide kit
Support Shelf Characteristics and Specifications
Characteristic
5063-9255
5063-9256
5063-9257
Material
Cold-rolled steel
Cold-rolled steel
Cold-rolled steel
Weight
4.5 kg (10 lbs)
4.5 kg (10 lbs)
4.5 kg (10 lbs)
Color
Quartz gray
Quartz gray
Quartz gray
Length
527.6 mm (20.77 in.)
527.6 mm (20.77 in.)
527.6 mm (20.77 in.)
Height
88.9 mm (3.5 in.)
133.4 mm (5.25 in.)
177.8 mm (7 in.)
Width
447.5 mm (17.618 in.)
489 mm (19.25 in.)
489 mm (19.25 in.)
Load Capacity
22.7 kg (50 lbs)
22.7 kg (50 lbs)
22.7 kg (50 lbs)
Rack Configuration Hint
Adapter kits, handles or flanges are not required if a support
shelf is used.
Find us at www.keysight.com Page 36
Lock Link Kits and Locking Feet Kits
All submodule cabinets of equal depths can be linked together vertically or side- by-side with hardware in the lock link kit. Cabinet frames are already pre-threaded to allow quick assembly.
For side-by-side connections, the Lock Link Kit contains 12 front hooks and 6 rear links, enough for 3 side- by-side joints. For submodule vertical connections, the kit also contains 4 front hooks and 4 rear links, enough for 2 over/under joints. The kit includes metric screws.
The Locking Feet Kit (5062-3999) is designed to accommodate full module vertical combinations of greater weight. The Lock Link Kit is recommended for only submodule vertical combinations, as well as side-by-side combinations.
Figure 34. Lock linking kit (5061-9694) Figure 35. Locking feet kit (5062-3999)
Figure 36. Vertical and horizontal linking configurations
Find us at www.keysight.com Page 37
Rail and Slide Kits
Keysight offers a variety of rail kits to meet instrument and controller rack mounting requirements. Instrument rackmount kits alone are not designed to support the full weight of most instruments and may deform or break. Rails and slides are available to support the rear of the instrument.
Proper rail selection is important to maximize the use of all EIA units in a rack and to assure proper fit vertically between instrument front panels.
Keysight offers a set of support rails that can cut in half the time required to install equipment in a rack. The rails hang on discrete slots on the vertical mounting columns, corresponding to each EIA unit in the rack. Vertical adjustment between instruments is minimized by selecting the proper rail. The system was specifically designed to minimize the time required to install Keysight instrumentation and can be used with other equipment. Rails will support up to 113 kg (250 lbs).
Figure 37. Basic rail kit (E3663AC)
Figure 38. Third party rail kit (E3664AC)
Find us at www.keysight.com Page 38
Slide Kits
Rack slides are available for full width System II cabinets to permit easy access to internal spaces. Each kit consists of two slides that mount directly to System II cabinet slide handle recess spaces (after removing the side handles). The slides also mount directly to vertical support columns in Keysight racks.
•
Non-tilting standard-duty slides carry 38.6 kg (85 lb) maximum load.
•
Non-tilting heavy-duty slides carry 79.3 kg (175 lb) maximum load.
•
Slide kits are compatible with inch and metric instruments.
Figure 39. Slide kits (1494-0060, 1494-0059, 1494-0058, top to bottom)
Figure 40. Standard slide kit (A) and brackets (C) Figure 41. Heavy-duty slide kit (B) and brackets (D)
Find us at www.keysight.com Page 39
End Brackets
End-bracket kits are available for both Keysight standard and heavy-duty slide kits. Slotted hole arrays in the brackets provide for front-to-back rack column spacing of up to a maximum of 609.45 mm (24 in) for standard slides and 688.9 mm (27.12 in) for the heavy-duty slides. These general-purpose mounting brackets fit most common non-Keysight racks that have L or U-shaped columns with EIA standard hole patterns.
Figure 42. Standard end bracket dimensions Figure 43. Heavy-duty end bracket dimensions
Rack Filler Panels
Spaces between instruments on the front face of the Keysight rack cabinet can be filled with metal filler panels. Filler panels provide an attractive system and eliminate dust from gathering on equipment.
•
Quartz gray.
•
Each panel is 19 inches wide.
•
Includes mounting hardware.
Figure 44. Filler panels
Find us at www.keysight.com Page 40
IEC-320 Female-Male Power Cables
Most Keysight products are shipped with detachable power cords with a localized male plug on one end and an IEC-320 female connector to plug into the instrument. Substitute the regular power cord with one of the following to connect your Keysight instrument/controller to the IEC-320 versions of our PDUs.
Figure 45. IEC-320 female-male power cables (8120-1860)
Rackmount Accessory Ordering Information
Accessories
5063-9255
88.1 mm (3 1/2 in) support shelf
5063-9256
132.6 mm (5 1/4 in) support shelf
5063-9257
177.0 mm (7 in) support shelf
1494-0015
Support shelf slide kit
5061-9694
Lock link kit for linking submodule cabinets of equal height
5062-3999
Locking feet kit for full module vertical combinations
E3663AC
Basic Rail Kit (for System II instruments)
E3664AC
3rd Party Rail Kit
1494-0060
Slide kit: Non-tilting, standard duty (Fits 345.4 D and 421.6 D)
1494-0059
Slide kit: Non-tilting, standard duty (Fits 497.8 D and 574.0 D)
1494-0058
Slide kit: Non-tilting, heavy duty (Fits 345.4 D and 421.6 D)
1494-0061
End brackets, standard duty
1494-0064
End brackets, heavy duty
E7731A
1 EIA unit filler panel
E7732A
2 EIA unit filler panel
E7733A
3 EIA unit filler panel
E7734A
4 EIA unit filler panel
E7735A
5 EIA unit filler panel
E7736A
6 EIA unit filler panel
E7737A
7 EIA unit filler panel
8120-1575C
762 mm (30 in) gray power cable
8120-1860
1524 mm (60 in) gray power cable
Find us at www.keysight.com Page 41
Testmobiles and Accessories
Keysight Testmobile Carts add protection and mobility to test instruments and systems. The convenience of mobility makes instruments readily available when needed. The cart effectively extends the amount of lab bench space. Ergonomic cart and accessory design make test equipment accessible to the operator, whether seated or standing at the test area. Additionally, several operators can cost effectively share expensive equipment that has been mounted on a Testmobile Cart.
Keysight testmobile carts are offered in cart capacities to provide optimum instrument test configuration:
•
Scope cart, 59 kg (130 lb)
•
System cart, 227 kg (500 lb)
Testmobile Benefits
Add mobility to your instruments
Keysight Testmobile carts provide convenient mobility of test equipment, PCs, or workstations to make them readily available when needed. This capability effectively extends the amount of lab bench space available. Mar- resistant, heavy-duty 5-inch hard rubber casters make moving instruments easy. All casters swivel, which lets the cart move right up to the workbench.
Bring the equipment to the test
Rather than bringing the test to the equipment, Keysight Testmobile carts bring the equipment to the test, to save time and get right to the task. Testmobile carts provide a convenient way to move everything from a small oscilloscope to a complete test system to the work to be tested.
Share expensive instruments
Keysight Testmobile carts allow several operators in a work group to cost- effectively share expensive equipment. In the case of a small test system, all instruments can be conveniently combined in one place, load capacity, and rackmount capability of the testmobile system cart.
Protect your investment
Unlike general-purpose cart design, Keysight testmobile carts have a nylon strap and steel buckle that secure instruments to the cart, and instrument feet fit securely in slots in both upper tilt tray and lower fixed tray. Expensive instruments are prevented from sliding or tipping off the cart. Locking brakes on rear wheels provide added safety and convenience.
Use instruments with ease
The ergonomically designed tilt tray adjusts 30-plus degrees for viewing and using instruments in comfort whether seated or standing. Lifting and carrying heavy instruments is no longer necessary with the mobility provided by Keysight testmobile carts.
Find us at www.keysight.com Page 42
Testmobile Key Features
Keysight’s Testmobile Carts offer the following attractive features:
•
Ergonomic design. Test equipment is operator-accessible whether seated or standing.
•
Heavy-duty casters make moving instruments easy.
•
Includes a nylon strap and steel buckles to secure instruments to the cart.
•
Tilt tray adjusts 30-plus degrees for viewing comfort.
•
Attractive quartz gray color
Testmobile Cart Selection Criteria
If rackmounting instruments and accessories is required, select the 1181BZ Testmobile system cart. It accommodates instruments up to 24 inches and a static drag chain is supplied. For simpler applications with instruments with a depth up to 17 inches, select the Keysight 1180CZ Testmobile scope cart.
Testmobile Scope Cart, 1180CZ
The Scope Cart is conveniently shipped virtually assembled, except for its handle and casters.
•
Tilt tray load capacity = 29.5 kg (65 lb)
•
Total load capacity = 59 kg (130 lb)
•
Tilt tray = 457 mm W x 457 mm D
(18 in W x 18 in D)
Figure 46. Testmobile scope cart (1180CZ)
Find us at www.keysight.com Page 43
Testmobile System Cart, 1181BZ
The System Cart is a small mobile rack that allows for additional equipment to be installed. That cart has space for the rack-mounting of any 19” EIA instrument up to 24” deep. The cart is conveniently shipped virtually assembled, except for its handle.
•
Tilt tray load capacity = 90.7 kg (200 lb)
•
Total load capacity = 226.8 kg (500 lb)
•
Tilt tray = 559 mm W x 660 mm D (22 in W x 26 in D)
•
Rackmount any 19-inch EIA instrument up to 24 inches deep beneath the tilt tray in EIA columns.
•
12 EIA units available for rack-mounting.
•
Includes one set of 5957-8476C angle rails to support rack-mounted instruments
Figure 48. Testmobile system cart (1181BZ)
Figure 47. 1180CZ Dimensions
Find us at www.keysight.com Page 44
Testmobile Characteristics and Specifications
Characteristic
1180CZ Scope Cart
1181BZ System Cart
Tilt tray load
29.5 kg (65 lb)
90.7 kg (200 lb)
Total load
59.0 kg (130 lb)
226.8 kg (500 lb)
Cart net weight
18.1 kg (40 lb)
39.0 kg (86 lb)
Color
Quartz gray
Quartz gray
Vertical rack space9
NA
533 mm (21.0 in – 12 EIA units)
Maximum instrument depth
432 mm (17.0 in)
635 mm (25.0 in)
Casters
101 mm (4 in) diameter
127 mm (5 in) diameter
9
Vertical rack space is reduced the more the tilt is angled.
Figure 49. 1181BZ Dimensions
Find us at www.keysight.com Page 45
Enhance Instrument Output
The Keysight 1181BZ Testmobile System Cart can be customized with a range of easy-to-mount accessories:
•
Work surface and anti-static mat
•
Plotter/printer stand, which can be set up either 305 mm or 381 mm (12 in or 15 in) high
•
Storage drawer (3.5 inch or 5.25 inch) (see page 19).
•
Angle rails for supporting rack mounted Instruments
Testmobile Work Surface
Keysight’s testmobile work surface provides additional work space on a testmobile cart. It can be used for
accessories, writing, or a keyboard and mouse. The work surface attaches to the testmobile tilt tray.
Figure 50. Testmobile work surface
Testmobile Work Surface Characteristics and Specifications
Characteristic
35181KZ Work Surface
Material
Cold-rolled steel
Weight
4.99 kg (11 lbs)
Color
Quartz gray
Find us at www.keysight.com Page 46
Testmobile Printer/Plotter Stand
Conveniently mount a printer or plotter on top of a system or instrument testmobile with the Keysight testmobile printer/plotter stand.
Figure 51. Printer/plotter stand
Testmobile Printer/Plotter Stand Characteristics and Specifications
Characteristic
35181HZ Printer/Plotter Stand
Material
Cold-rolled steel
Weight
8.16 kg (18 lbs)
Color
Quartz gray
Load capacity
11.34 kg (25 lbs)
Find us at www.keysight.com Page 47
Thi s info rmatio n is subjec t to change with out no tice. © Key sight Technologi es, 2019 - 2020, P ublish ed in USA, Augu st 25, 2020, 5980-0450EN
Learn more at: www.keysight.com
For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus
Testmobile Accessories Selection Chart
Part number
Description
1180CZ Scope Cart
1181BZ System Cart
35181HZ
Printer/plotter stand
NA
Yes
35181KZ
Work surface
NA
Yes
35181J
Storage drawer 3.5” high
NA
Yes
35181M
Storage drawer 5.25” high
NA
Yes
35181E
Support cover/shelf for drawers
NA
Yes
5957-8476
Angle rails for rack mounting
NA
Yes
8120-1575C
IEC-320 cable, 762 mm (30 in.)
Yes
Yes
8120-1860
IEC-320 cable, 1.5 m (60 in.)
Yes
Yes
Conclusion
Keysight Technologies offers 19-inch EIA (Electronics Industries Association) rack cabinets tailored to meet the needs of test and measurement instrumentation customers. Keysight racks are specifically designed for Keysight’s test and measurement equipment, virtually ensuring a perfect fit. They will also accommodate non-Keysight equipment making them suitable for a mixed instrument environment. Rack mounting is fast and easy with unique design features. A selection of options and accessories provides flexibility to meet the vast majority of racking applications.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use