Keysight E4402B Configurations Guide

Download

Page 1

Keysight Technologies

ESA-E Series Spectrum Analyzer

Configuration Guide

Page 2

Introduction

This ESA configuration guide will help you determine which performance options, measurement personalities, accessories, and services to include in your new ESA-E, or to add as upgrades to an existing ESA-E.

Options for the EXA X-Series signal analyzer are shown alongside the ESA to help cutomers who wish to migrate to the latest technology. Customers looking for increased speed, more application options, or modern connectivity will benefit by moving to the EXA signal analyzer.

Keysight ESA-E Spectrum Analyzer

This step-by-step guide will help you configure your ESA-E. Capabilities that are listed as standard come with the instrument at no additional charge. Tailor the performance, exterior, and service packages to meet your requirements.

The Keysight Technologies, Inc. ESA-E spectrum analyzer is available in three express configurations: standard (STD/ STG) or communications test (COM). The express analyzers offer faster deliver y by limiting the number of options that can be ordered together. The custom configuration allows for maximum flexibility in ordering the analyzer that best meets your needs by offering all of the ESA-E options; however, it increases the delivery timeframe.

For detailed specifications, refer to the ESA-E Spectrum Analyzer specification guide (E4401-90490). For a summary of specifications, refer to the ESA-E data sheet, literature number 5989-9815EN.

Page 3

ESA-E Custom Configuration

Step 1. Select your frequency range

Description ESA-E model number

Frequency range, 9 kHz to 3.0 GHz E4402B N9010A-503, frequency range, 10 Hz to 3.6 GHz Frequency range, 9 kHz to 6.7 GHz E4404B N9010A-507, frequency range, 10 Hz to 7.0 GHz Frequency range, 9 kHz to 13.2 GHz E4405B N9010A-513, frequency range, 10 Hz to 13.6 GHz Frequency range, 9 kHz to 26.5 GHz E4407B N9010A-526, frequency range, 10 Hz to 26.5 GHz

Not available N9010A-532, frequency range, 10 Hz to 32.0 GHz Not available N9010A-544, frequency range, 10 Hz to 44.0 GHz

EXA option number

Step 2. Included options at no additional charge

Description ESA-E spectrum analyzer EXA signal analyzer

GPIB connection Option A4H

IntuiLink PC connectivity software Connects to Microsoft® Word and Excel The PC-based EXA requires no additional software to

Standard on all EXA signal analyzers; in addition, the EXA offers seven USB ports and LAN connectivity as standard.

connect to Microsoft applications

Step 3. Choose frequency reference

Description ESA-E spectrum analyzer EXA signal analyzer

Frequency reference (standard aging rate) ±2 x 10–6 / year ±1 x 10–6 / year High-stability frequency reference

(reduces frequency drift resulting in more accurate measurements; recommended option)

Option 1D5 Aging rate: ±1 x 10–7 / year

N9010A-PFR Aging rate: ±1 x 10–7 / year

Step 4. Choose an attenuator

Description ESA-E spectrum analyzer EXA signal analyzer

Mechanical attenuator (standard) 5 dB steps, 0 to 60 dB 10 dB steps, 0 to 60 dB

Fine-step mechanical attenuator Not available N9010A-FSA

Allows 2 dB steps for the full 60 dB range of the mechanical attenuator

Electronic at tenuator up to 3.6 GHz Not available N9010A-EA3

Add to the mechanical attenuator; 1 dB steps, 0 to 24 dB

Step 5. Add a preamplifier

Description ESA-E spectrum analyzer EXA signal analyzer

Preamplifier Option 1DS

1 MHz to 3 GHz

1. The E4402B has six available expansion slots for additional hardware options: the E4404/05/07B has five available expansion slots

2. Requires one expansion slot

N9010A-P03, frequency range, 100 kHz to 3.6 GHz N9010A-P07, frequency range, 100 kHz to 7.0 GHz N9010A-P13, frequency range, 100 kHz to 13.6 GHz N9010A-P26, frequency range, 100 kHz to 26.5 GHz N9010A-P32, frequency range, 100 kHz to 32.0 GHz N9010A-P44, frequency range, 100 kHz to 44.0 GHz

Page 4

ESA-E Custom Configuration – c ontinued

Step 6. Add extra options

Description ESA-E spectrum analyzer EXA signal analyzer

Narrow resolution bandwidths (recommended option)

Low-emissions shielding Option 060 Wide-offset phase noise improvement and

ACPR dynamic range extension Replace GPIB with serial port Option 1AX Time-gated spectrum analysis Options 1D6 Standard 50 Ω tracking generator Option 1DN, 9 kHz to 3 GHz Not available (available on CXA) Fast time domain sweep; IF, sweep,

and video output ports External mixing Option AYZ Digital demodulation hardware Option B7D/B7E

APC 3.5 mm input connector Option BAB Low frequency extension to 100 Hz Option UKB EMI detectors and FM Demodulation Option AYQ

1. If two or more ESA-E options are ordered, memory size may limit the number of options that may be loaded at any one time; for detailed information about memory size limitations, please see the Web site: http://sa.tm.keysight.com/ESA/memory

2. Not compatible with Option B7B

3. Requires one expansion slot

4. Not compatible with Option A4H

5. E4407B only

6. Requires Option 1D5; occupies two expansion slots, must be ordered jointly

7. Requires Option 1DR

Option 1DR Standard

Option 120

Option AYX

3,4

Not available Similar performance standard

Serial port unavailable; USB is standard

Fast time domain sweep is standard

EXA Option EXM (available with EXA Option 532 or 544) 25 MHz analysis bandwidth standard; 40 MHz optional

(10 MHz analysis bandwidth)

3,7

Not available EXA operational from 10 Hz EXA Option EMC provides EMI detectors; N9063A provides analog

demodulation including FM demodulation

Page 5

ESA-E Custom Configuration – c ontinued

Step 7. Choose measurement software

Description ESA-E spectrum analyzer EXA signal analyzer

AM demodulation Standard N9063A FM demodulation/ deviation Option BAA Phase noise measurement Option 226 Noise figure measurement Option 219 GSM/GPRS measurement Option BAH Edge upgrade to option BAH Option 252 Cable fault location measurement Option 225 TV trigger on screen measurement Option B7B

Cable TV field service and analog broadcast

Option 227 Not available

measurement Modulation analysis measurement Option 229 Benchlink Web remote software Option 230 ESA to 89600 VSA software link Option 231 89600 VSA software 89600 VSA software – runs on external

PC 8566/68 programming code compatibility Option 266 8590 series programming code compatibility Option 290 856xE/EC programming code compatibility Not available N9061A-2FP

Bluetooth® measurement analyzer bundle Option 304

cdmaOne measurement Option BAC cdma2000 measurement Not available N9072A W-CDMA measurement Not available N9073A-1FP HSDPA / HSUPA measurement Not available N9073A-2FP

802.16 OFDMA measurement Not available N9075A TD-SCDMA measurement Not available N9079A-1FP HSDPA/8PSK measurement Not available N9079A-2FP

1,2

4,2

5,6

N9063A N9068A N9069A N9071A N9071A Not available TV trigger (no picture on screen) available with Firmware

rev. >A.11.00 (N9010AK-R2C required for existing units)

N9064A Remote desktop comes standard with the PC-based EXA Standard 89600 VSA software – runs internal to the instrument or on

an external PC

N9061A-1FP Not available

N9081A N9072A

Step 8. Add special options

Description ESA-E spectrum analyzer EXA signal analyzer

26.5 GHz uncalibrated built in preamplifier Option H26 70 MHz IF output Options H70 FM deviation personality enhancement Option J36

1. Not compatible with Option 304 or 106

2. Occupies one expansion slot

3. If two or more ESA-E options are ordered, memory size may limit the number of options that may be loaded at any one time; for detailed information about memor y size limitations, please see the Web site: http://sa.tm.keysight.com/ESA/memory

4. See ESA-E Series Spectrum Analyzers Noise Figure Measurements Personality - Technical Overview, literature number 5989-0215EN, for recommended options

5. Requires Option B7D/B7E

6. Requires Option 1D5 and 1D6; includes capability of Option 225

7. Requires Option BAH

8. Requires Option 1DN; not compatible with Option BAH; recommended accessory Option B7K

9. Requires BAA; not compatible with Option 060

10. Requires Options B7D/B7E, A4H, and 1D5; includes capability of Option 231

11. Requires Option A4H

12. Requires Options B7D/B7E, A4H, and 1D5

13. Free download on the Web, no license required: http://www.keysight.com/find/esa

14. Includes Options 228, 106, B7D/B7E, 1DS, and 1D5; occupies three expansion slots

15. Requires Options B7D/B7E and 1D5

16. Recommended for use with 89600 VSA software

17. Requires Option BAA

18. Available at time of purchase only. Not upgradable.

2,16

N9010A-P26 (calibrated) EXA Option CRP N9063A

Page 6

ESA-E Standard Express Spectrum Analyzer (STD/STG)

The ESA-E express analyzers offer configurations that are typically ordered together to help speed instrument delivery. The EXA signal analyzer is not offered in an express configuration, however, the newer technology allows for faster delivery times, regardless of the configuration. If you wish to order an EXA configuration equivalent to the ESA-E express analyzer, please select the individual EXA options shown in the table below.

Step 1. Select your frequency range

Description ESA-E model number

Frequency range, 9 kHz to 3.0 GHz E4402B

E4402B-STD or E4402B-STG (adds tracking generator)

Frequency range, 9 kHz to 6.7 GHz E4404B

E4404B-STD or E4404B-STG (adds tracking generator)

Frequency range, 9 kHz to 13.2 GHz E4405B

E4405B-STD or E4405B-STG (adds tracking generator)

Frequency range, 9 kHz to 26.5 GHz E4407B

E4407B-STD or E4407B-STG (adds tracking generator)

Not available N9010A-532, frequency range, 10 Hz to 32.0 GHz Not available N9010A-544, frequency range, 10 Hz to 44.0 GHz

EXA option number

N9010A-503, frequency range, 10 Hz to 3.6 GHz

N9010A-507, frequency range, 10 Hz to 7.0 GHz

N9010A-513, frequency range, 10 Hz to 13.6 GHz

N9010A-526, frequency range, 10 Hz to 26.5 GHz

Step 2. Included ESA-E options at no additional charge

Description ESA-E spectrum analyzer EXA signal analyzer

GPIB connection Option A4H

FM demodulation/deviation Option BAA Fast time domain sweep; IF, sweep, and video

output ports IntuiLink PC connectivity software Connects to Microsoft® Word and Excel The PC-based EXA requires no additional software to

Option AYX

2,3

Standard on all EXA signal analyzers; in addition, the EXA offers seven USB ports and LAN connectivity standard

N9063A Fast time domain sweep is standard

connect to Microsoft applications

Step 3. Choose frequency reference

Description ESA-E spectrum analyzer EXA signal analyzer

Frequency reference (standard aging rate) ±2 x 10–6 / year ±1 x 10–6 / year High-stability frequency reference

(reduces frequency drift resulting in more accurate measurements; recommended option)

1. The E4402B has three expansion slots for additional options; the E4404/5/7B have two expansion slots

2. Requires one expansion slot

3. Not compatible with Options 304 or 106

Option 1D5 Aging rate: ±1 x 10–7 / year

N9010A-PFR Aging rate: ±1 x 10–7 / year

Page 7

ESA-E Standard Express Spectrum Analyzer (STD/STG) – continued

Step 4. Add a preamplifier (preamplifiers are not standard)

Description ESA-E spectrum analyzer EXA signal analyzer

Preamplifier Option 1DS

1 MHz to 3 GHz

Step 5. Add extra options1

Description ESA-E spectrum analyzer EXA signal analyzer

Narrow resolution bandwidths (recommended option)

Time-gated spectrum analysis Options 1D6 Standard Performance bundle Option B752 For equivalency, order N9010A-PFR Replace GPIB with serial port Option 1AX 50 Ω tracking generator Option 1DN, 9 kHz to 3 GHz Not available (available on CXA)

Option 1DR Standard

3,4

Step 6. Choose measurement software

Description ESA-E spectrum analyzer EXA signal analyzer

Phase noise measurement Option 226 Noise figure measurement Option 219 Cable fault location measurement Option 225 Cable TV field service and analog broadcast

measurement Benchlink Web remote software Option 230 89600 VSA software 89600 VSA software – runs on external

8566/68 programming code compatibility Option 266 8590 Series programming code compatibility Option 290 856xE/EC programming code compatibility Not available N9061A-2FP

Option 227 Not available

5,6

N9010A-P03, frequency range 100 kHz to 3.6 GHz N9010A-P07, frequency range, 100 kHz to 7.0 GHz N9010A-P13, frequency range, 100 kHz to 13.6 GHz N9010A-P26, frequency range, 100 kHz to 26.5 GHz N9010A-P32, frequency range, 100 kHz to 32.0 GHz N9010A-P44, frequency range, 100 kHz to 44.0 GHz

Serial port unavailable; USB comes standard

N9068A N9069A Not available

Remote desktop come standard with the PC-based EXA 89600 VSA software – runs internal to the instrument or on

an external PC N9061A-1FP Not available

Future upgrades for the ESA-E standard express spectrum analyzer (STD/SG)

Available future expansion slots

E4402B – Three additional expansion slots E4404/5/7B – Two additional expansion slots

1. If more than two ESA-E options are ordered, memory size may limit the number of options that can be loaded at any one time; for detailed information about memory size limitations, please see the Web site: http://sa.tm.keysight.com/ESA/memory

2. Includes Options 1D5, 1DR and 1DS

3. Requires one expansion slot

4. Not compatible with Option A4H

5. See ESA-E Series Spectrum Analyzers Noise Figure Measurements Personality – Technical Overview, literature number 5989-0215EN, for recommended options

6. Requires one expansion slot

7. Requires Option 1DN; not compatible with Option BAH; recommended accessory Option B7K

8. Requires Option A4H

9. Free download on the Web, no license required: http://www.keysight.com/find/esa

EXA - Two additional expansion slots

Page 8

ESA-E Communications Test Express Spectrum Analyzer (COM)

Step 1. Select your frequency range

Description ESA-E model number

Frequency range, 9 kHz to 3.0 GHz E4402B

E4402B-COM Frequency range, 9 kHz to 6.7 GHz E4404B

E4404B-COM Frequency range, 9 kHz to 13.2 GHz E4405B

E4405B-COM Frequency range, 9 kHz to 26.5 GHz E4407B

E4407B-COM

Not available N9010A-532, frequency range, 10 Hz to 32.0 GHz

Not available N9010A-544, frequency range, 10 Hz to 44.0 GHz

EXA option number

N9010A-503, frequency range, 10 Hz to 3.6 GHz

N9010A-507, frequency range, 10 Hz to 7.0 GHz

N9010A-513, frequency range, 10 Hz to 13.6 GHz

N9010A-526, frequency range, 10 Hz to 26.5 GHz

Step 2. Included ESA-E options at no additional charge

Description ESA-E spectrum analyzer EXA signal analyzer

GPIB connection Option A4H

High-stability frequency reference (reduces frequency drift resulting in more accurate measurements; recommended option)

Narrow resolution bandwidths (recommended option)

ESA to 89600 VSA software link

FM demodulation/ deviation

Digital demodulation hardware Option B7D/B7E5 Standard IntuiLink PC connectivity software Connects to Microsoft® Word and Excel The PC-based EXA requires no additional software to

Option 1D5

Aging rate: ±1 x 10–7 / year

Option 1DR Standard

Option 231

Option BAA

3, 6

2,3,4

Standard on all EXA signal analyzers; in addition, the EXA offers seven USB ports and LAN connectivity standard

N9010A-PFR Aging rate: ±1 x 10–7 / year

Standard

N9063A

connect to Microsoft applications

Step 3. Add a preamplifier (preamplifiers are not standard)

Description ESA-E spectrum analyzer EXA signal analyzer

Preamplifier Option 1DS

1 MHz to 3 GHz

Step 4. Add additional options

Description ESA-E spectrum analyzer EXA signal analyzer

Replace GPIB with serial port Option 1AX Time-gated spectrum analysis Options 1D6 Standard

1. The E4402B has two expansion slots for additional hardware options; the E4404/05/07B has one expansion slot

2. Requires one expansion slot

3. Requires Options B7D/B7E, A4H, and 1D5

4. Not compatible with Option 304 or 106

5. Occupies two expansion slots

6. If more than two or three ESA-E options are ordered, memory size may limit the number of options that can be loaded at any one time; for detailed information about memory size limitations, please see the Web site: http://sa.tm.keysight.com/ESA/memory

7. Not compatible with Option A4H

2,7

Serial port unavailable; USB is standard

Page 9

ESA-E Communications Test Express Spectrum Analyzer (COM) – continued

Step 5. Choose measurement software1

Description ESA-E spectrum analyzer EXA signal analyzer

Phase noise measurement Option 226 N9068A Noise figure measurement Option 219 GSM/GPRS measurement Option BAH EDGE upgrade to Option BAH Option 2525 N9071A Cable TV field service and analog broadcast

measurement Modulation analysis measurement Option 229 89600 VSA software 89600 VSA software – runs on external PC 89600 VSA software – runs internal to the instrument or on

8566/68 programming code compatibility Option 266 8590 Series programming code compatibility Option 290 cdmaOne measurement Option BAC

Option 227 Not available

3,4

N9069A N9071A

N9064A

an external PC N9061A-1FP Not available N9072A

Future upgrades for the ESA-E standard express spectrum analyzer (STD/SG)

Available future expansion slots

E4402B – Three additional expansion slots E4404/5/7B – Two additional expansion slots

1. If more than two or three ESA-E options are ordered, memory size may limit the number of options that can be loaded at any one time; for detailed information about memor y size limitations, please see the Web site: http://sa.support.keysight.com/ESA /memory/

2. See ESA-E Series Spectrum Analyzers Noise Figure Measurements Personality – Technical Overview, literature number 5989-0215EN, for recommended options

3. Requires Option B7D/B7E

4. Requires Options 1D5 and 1D6; includes capability of Option 225

5. Requires Option BAH

6. Requires Options B7D/B7E, A4H, and 1D5; includes capability of Option 231

7. Free download on the Web, no license required: h t t p: //www.keysight.com/find/esa

8. Requires Options B7D/B7E and 1D5

Express Analyzer and Bundle Equivalent Options

The table below shows equivalent options in each bundle offered for ESA-E spectrum analyzers.

ESA-E express option or bundle ESA-E equivalent option(s) Additional information

STD- Standard analyzer AYX, BAA STG- Standard analyzer with tracking generator AYX, BAA, 1DN COM- Communication test analyzer B7D/B7E, 1D5, 1DR, BAA, 231 B75- Performance bundle 1DR, 1DS, 1D5 Only available with express analyzer STD or STG 304- Bluetooth® premium bundle 228,106, B7D/B7E, 1DS, 1D5 Options 106 and 228 are not available outside the

option bundle 304

Page 10

ESA-E Accessory and Calibration Options

Step 6. Select accessories and calibration options

Description ESA-E spectrum

analyzer option

12 VDC power cable A5D DC power connection available on

Hard transit case AXT E4401-60101 N9010A-HTC Gray soft carrying/operation case AYT E4401-60117 Not available Yellow soft carrying/operation case AYU E4401-60118 Not available Cable fault measurement kit (50 Ω) B7K Requires Option 1DN or STG

Gray backpack carrying case 042 9300-2465 Not available Yellow backpack carrying case 044 9300-2470 Not available Rack mount kit with handles 1CP This kit is designed to fit into Keysight

50 to 75 Ω minimum loss pad 1D7 0955-1020 N9010A-MLP Rechargeable snap-on battery and charger E1779B Order as separate model number,

Front panel cover UK9 E4401-60193 Standard Benchlink spectrum analyzer, PC software B70 Also orderable as E4444A; requires

Benchlink Web remote control software

IntuiLink software (shipped with every instrument)

Harmonic mixer series (26.5, 40, 50, 60, 75, 110 GHz)

Preselected millimeter mixer series (40, 50, 60, 75 GHz)

Low noise amplifier to 1 GHz 11909A Firmware upgrade UE2 Firmware updates also available on

Add extra manual set OB1 Available for Web download Available for Web download Commercial calibration certificate with test data UK6 N9010A-UK6 Keysight Calibration + Uncertainties + Guardband-

ing (accredited cal) Calibration Assurance Plan, Return to Keysight, 3

years Calibration Assurance Plan, Return to Keysight, 5

years Keysight Calibration + Uncertainties + Guardband-

ing, 3 years Keysight Calibration + Uncertainties + Guardband-

ing, 5 years ANSI Z540-1-1994 Calibration A6J N9010A-A6J ANSI Z540-1-1994 Calibration, 3 years R-50C-021-3 R-50C-021-3 ANSI Z540-1-1994 Calibration, 5 years R-50C-021-5 R-50C-021-5 Delete manual set (retains CD-ROM version) OBO Service documentation, component level CLIP OBV Component level information package Service documentation, assembly level OBW Performance verification and

For more information visit www.keysight.com/find/accessories

230 Requires Option A4H Remote desktop is a

*** Available on Web site for download Remote desktop is a

11970 For use in E4407B Option AYZ For use in mmW EXA

11974 For use in E4407B Option AYZ

AMG N9010A-AMG

R-50C-011-3 R-50C-011-3

R-50C-011-5 R-50C-011-5

R-50C-016-3 R-50C-016-3

R-50C-016-5 R-50C-016-5

ESA-E notes ESA-E

part number

E4401-60066 Not available

every ESA

and Option 225 or BAH

E4401-60057 N9010A-1CP racks only; for non-Keysight racks, additional end brackets are required and are available by ordering part number 1494-0061

not option number

Option A4H or 1AX

Web site for free download

(http://www.keysight.com/find/

esa_firmware/)

adjustment software included

EXA signal analyzer option

Not available

Remote desktop is a standard feature on EXA

standard feature on EXA

(N9010A-532 or 544) with Option EXM

See

(http://www.keysight.com/

find/exa)

N9010-90002

Page 11

ESA-E Upgrade Options

Add additional options or upgrade your existing ESA-E spectrum analyzer

Available models:

E4401BU (9 kHz to 1.5 GHz) E4402BU (30 Hz to 3.0 GHz) E4404BU (30 Hz to 6.7 GHz) E4405BU (30 Hz to 13.2 GHz) E4407BU (30 Hz to 26.5 GHz)

Ordering instructions

To upgrade an existing ESA-E Series spectrum analyzer, order the corresponding model number followed by a ‘U’ and the desired option number. (E440xBU-xxx)

For more information see:

http://www.keysight.com/find/esa-e_upgrades/

Customer upgradable

Hardware capabilities and performance

Replace GPIB connection (A4H) with serial port 1AX Not compatible with Option A4H; occupies one expansion slot X X GPIB connection A4H Not compatible with Option 1AX; occupies one expansion slot X X Wide offset phase noise improvement and

ACPR dynamic range extension Time-gated spectrum analysis 1D6 X X 50 Ω tracking generator (9 kHz to 3.0 GHz) 1DN Operates to 1.5 GHz on E4401B X X Narrow resolution BW 1DR X X TV trigger and picture on screen B7B Requires BAA; not compatible with Option 060 X X Cable fault location accessory kit (50 Ω) B7K Requires Option 1DN and Option 225 or BAH X FM demodulation/deviation BAA Not compatible with Options 304, or 106; occupies one expansion

Fast time domain sweep; IF, sweep, and video output ports

Low emissions shielding 060 Not compatible with B7B X X Preamplifier built-in for enhanced sensitivity 1DS Operates to 3 GHz X X 100 Hz (30 Hz usable) frequency range extension UKB Requires Option 1DR X X Digital demodulation hardware B7D/

APC 3.5 mm input connector BAB Available on the E4407B only X X Bluetooth FSK demodulator 106 Requires Options B7D, 228; occupies one expansion slot X X External mixing AYZ Available on E4407B only X X EMI detectors quasi-peak and FM demodulation AYQ Occupies one expansion slot; requires Option 1DR X X 70 MHz IF out H70 Occupies one expansion slot X X X Memory extension to 10 MB X B72 Included on all new instruments starting with SN US4144

High stability frequency reference 1D5 E4401B X X X X

IF sweep, video output ports A4J Not compatible with AYX; occupies one expansion slot X X

120 Occupies one expansion slot X X

slot

AYX Not compatible with Options B7D, 304; occupies one expansion

slot. Includes capability of Option A4J

Requires Option 1D5; not compatible with Option AYX;

B7E

occupies two expansion slots, must be ordered jointly

or MY4144; required for firmware version A.08.00 or higher

E4402B/04B/05B/07B (SN prefix before 4421) SN prefixes US4421, MY4421, SG4421 or later

X X

Applications and firmware

Noise figure measurement personality and hardware 2191See Option 219 Technical Overview for recommended options Cable fault location measurement personality 2251Requires Option 1DN; recommended accessory

Phase noise measurement personality 2261Firmware available on Web, requires license key Cable TV service and installation personality 2271Firmware available on Web, requires license key Bluetooth measurement personality 2281Requires Option 106, AYX requires Option 106 for full functionality Modulation analysis personality 2291Requires Options B7D/B7E, 1D5; includes capability of

ESA to 89601A vector signal analysis software link utility

EDGE upgrade on GSM 2521Requires Options BAH, B7D/B7E, A4H, 1D5;

HP 8566/68 programming code compatibility 2661Free download from Web; www.keysight.com/find/esa 8590 Series programming code compatibility 2901Free download from Web; www.keysight.com/find/esa GSM/GPRS measurement personality BAH1Requires Options 1D6

cdmaOne measurement personality BAC1Firmware available on Web, requires license key FM deviation personality enhancement J361Requires Option BAA

1. If more than two or three measurement personalities are ordered, memory size limitations may limit the number that may be loaded into the ESA at any one time. For detailed information about memory size limits, please see the Web site: http://sa.tm.keysight.com/ESA/memory

2. For serial number prefixes less than US4421, MY4421, or SG4421, order E440xBK-1D5

3. For serial number prefixes US4421, MY4421, or SG4421 and later, order E440xBL-1D5

4. Self-maintainers are customers who service and calibrate their own instruments. Information about the N7811A software can be found at: http://calsw.tm.keysight.com

Option B7K; firmware available on Web, requires license key

Option 231; firmware available on Web, requires license key

2311Requires Options B7D/B7E, A4H,1D5;

Option 229 included capability of Option 231; free download from Web; www.keysight.com/find/esa

requires Option 1DN for cable fault test

firmware available on Web, requires license key

X X

X X X X

X X X

X X

Customer upgradable w/test

Self-maintainers with

Option 0BW & N7811A software

X X

Return to service center

Return to factory

Page 12

Related Literature

Keysight ESA-E Series Spectrum Analyzer, Configuration Guide, literature number 5989-9953EN

Modulation Analysis Measurement Personality for the ESA-E Series Spectrum Analyzers, Technical Overview,

literature number 5988-2116EN

ESA-E Series Spectrum Analyzers Cable Fault Location Personality, Technical Overview, literature number 5980-

1915E

Cable TV Service and Installation Analyzer, Product Overview,

literature number 5980-0845E

8560 EC Series Spectrum Analyzers, Data Sheet, literature number 5968-8156E

E4444A BenchLink Spectrum Analyzer PC Software for Portable Spectrum EMC, and Sweep/Ingress Analyzers, Technical Overview, literature number 5966-0676E

BenchLink Web Remote Control Software for the PSA Series Spectrum Analyzers, ESA-E and ESA-L Series Spectrum Analyzers, E7400A Series EMC Analyzers, Technical Overview, literature number 5988-2610EN

E1779B Rechargeable Battery Pack, Technical Overview, literature number 5966-1851E

ESA Series Spectrum Analyzers, Demonstration Guide and Application Note, literature number 5968-3658E

ESA-E Series Spectrum Analyzers TV Transmission Quality Measurements, Technical Overview, literature

number 5968-6874E

ESA-E Series Spectrum Analyzers Measuring signals above 26.5 GHz, Technical Overview, literature number

5968-6873E

Spectrum Analyzer and Signal Analyzer Selection Guide, literature number 5968-3413E

Phase Noise Measurement Personality for the Keysight ESA-E Series Spectrum Analyzers, Technical Overview,

literature number 5988-4348EN

Page 13

13 | Keysight | ESA-E Series Spectrum Analyzer - Configuration Guide

Evolving Since 1939

Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology.

From Hewlett-Packard to Agilent to Keysight.

myKeysight

www.keysight.com/find/mykeysight

A personalized view into the information most relevant to you.

http://www.keysight.com/find/emt_product_registration

Keysight Services

www.keysight.com/find/service

Keysight Services can help from acquisition to renewal across your instrument’s lifecycle. Our comprehensive service offerings—onestop calibration, repair, asset management, technology refresh, consulting, training and more—helps you improve product quality and lower costs.

Keysight Assurance Plans

www.keysight.com/find/AssurancePlans

Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements.

Keysight Channel Partners

www.keysight.com/find/channelpartners

Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience.

For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at:

www.keysight.com/find/contactus

Americas

Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444

Asia Pacific

Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 11 2626 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100

Europe & Middle East

Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 800 000154 Sweden 0200 882255 Switzerland 0800 805353

Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT)

United Kingdom 0800 0260637

For other unlisted countries:

www.keysight.com/find/contactus

(BP-9-7-17)

Bluetooth

and the Bluetooth logos are trademarks owned by Bluetooth

SIG, Inc., U.S.A. and licensed to Keysight Technologies, Inc.

www.keysight.com/find/esa

www.keysight.com/find/cxa

DEKRA Certified

ISO9001 Quality Management System

www.keysight.com/go/quality

Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System

This information is subject to change without notice. © Keysight Technologies, 2017 Published in USA, December 2, 2017 5989-9953EN

www.keysight.com