Keys Fitness HT-PRO User Manual
Owner’s Manual
Health Trainer Pro Treadmill
Customer Service
(888) 340-0482
Keys Fitness Products
4009 Distribution Drive
Suite 250
Garland, TX 75041
www.keysfitness.com
CAUTION! Read all precautions
and instructions in this manual
before using this equipment.
Model Name : HT-PRO
Serial Number :
415-00061
07/06 Rev A
Write down for future reference
Serial Number Decal Location
Table of Contents
Important Safety Information 3
Before You Start 4
Assembly 5-9
Moving Instructions 10
Power Requirements 11
Console Panel Functions 12
Program Operation 13-14
Program Profiles 15
Monitoring Your Heart Rate 16-17
Warm Up Exercises 18
Changing to MPH or KM 19
Calibration Sequence 20
Belt Adjustment 21
Maintenance Instructions 22
Error Messages 23
Troubleshooting 24
Parts List 25
Exploded View 26-27
Warranty Information 28
2
Important Safety Information
WARNING! Before using this treadmill or starting any exercise program, consult your
physician. This is especially important for persons over the age of 35 and/or persons with
pre-existing health problems. The manufacturer or distributor assumes no responsibility for
personal injury or property damage sustained by or through the use of this product.
WARNING! To reduce the risk of electrical shock, burns, fire, or other possible injuries to the
user, it is important to review this manual and the following precautions before operation.
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS AND TIPS
1. Always secure Safety Key firmly to waistband.
2. It is the owner’s responsibility to ensure that all users of this treadmill have read the
Owner’s Manual and are familiar with warnings and safety precautions.
3. This treadmill has a user maximum capacity of 300 pounds.
4. The treadmill should only be used on a level surface and is intended for indoor use only.
The treadmill should not be placed in a garage, patio, or near water and should never be used
while you are wet. Keys recommends a treadmill mat be placed under the treadmill to protect
floor or carpet and for easier cleaning.
5. Follow safety information in regard to plugging in your treadmill. Keep the power cord away
from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
6. Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not
use the treadmill with bare feet, sandals, socks or stockings.
7. Always straddle the belt and allow it to start moving before stepping onto the belt.
8. Hold on to handrail when adjusting speed or other controls.
9. Always examine your treadmill before using to ensure all parts are in working order.
10. Allow the belt to fully stop before dismounting.
11. Pets should never be allowed near or on the treadmill.
12. Close supervision is necessary when this appliance is used by or near children, invalids or
disabled persons.
13. Never operate the treadmill where oxygen is being administered, or where aerosol products
are being used.
14. Never insert any object or body parts into any opening.
15. For safety and to prevent damage to your treadmill, no more than one person should use
the treadmill at a time.
16. Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill
should only be performed by an authorized service representative, unless authorized and/or
instructed by the manufacturer
17. Failure to follow these instructions will void the treadmill warranty.
18. Never leave the treadmill unattended when plugged in. Unplug from outlet when not in
use and before service or maintenance.
19. Always unplug this appliance immediately after using and before cleaning. To disconnect,
turn all controls to the off position, then remove plug from outlet.
3
Before You Start
Thank you for purchasing the Health Trainer PRO Treadmill! This quality product you have
chosen was designed to meet your needs for cardiovascular exercise. Before you start, please
read the Owner's Manual and become familiar with the operation of your new treadmill.
Remember to take the time to perform the stretching exercises provided to avoid
injury.
Do not stand on the walking belt while pressing the Power button or Start/Stop button.
Always adjust the speed of the treadmill in small increments as this treadmill is capable of
high speeds.
If you are taking medication, consult your physician to see if the medication will affect your
exercise heart rate.
If you have heart problems, you are not active, and/or are over the age of 35 years, do not
use the pre-set treadmill programs or start an exercise program without first contacting and
receiving approval from your physician.
To avoid the risk of electrical shock, always keep the console dry. Do not spill liquids on the
console. Keys Fitness recommends a sealed water bottle for beverages consumed while using
the treadmill.
Please review the following drawing below to familiarize yourself with the listed
parts. This manual covers several treadmills, so the one pictured below may not be
identical to your particular model.
RUNNING BELT
LATCH
LEFT UPRIGHT
MOTOR COVER
CONSOLE
RIGHT UPRIGHT
TRANSPORT WHEEL
4
Assembly
The Health Trainer PRO Treadmill will require assembly before operating. After opening the
box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet.
Locate the hardware pack and identify the following parts required for assembly.
Parts List:
1. Owner’s Manual
2. Base Assembly
3. Console Assembly
4. Left and Right Upright
5. Left and Right Fender
6. Safety Key (Reed Switch)
7. Left and Right Inside Handle Covers
8. Left and Right Outside Handle Covers
9. Allen Wrench
10. Phillips Screw M6x12 (Qty. 6)
11. Phillips Screw ST4.2x13 (Qty. 8)
12. Allen Bolt M8x15 (Qty. 8)
13. Washer 9x22x2 mm (Qty. 8)
5
Assembly
Assembly requires the included allen
wrench.
Do not plug in the power cord until all
assembly steps are completed.
Step 1:
Place the left and right fenders through
the tube of the left and right uprights as
shown in Figure 1.
Figure 1
UPRIGHTS
Step 2:
Slide the fenders up the upright assembly
and pull the console harness through the
hole in bottom of the left upright tube as
shown in Figure 2.
FENDERS
Figure 2
CONSOLE HARNESS
6
Assembly
Step 3:
Connect the console harness from inside
the left upright to the console harness from
the base assembly as shown in Figure 3.
Next, attach left upright and right upright
to base using Allen bolts M8x15 (Qty. 8)
and washers 9x22x2 mm (Qty. 8). Do not
tighten bolts all the way at this time.
Figure 3
ALLEN BOLT
Step 4:
Attach the console assembly by connecting the console harness, incline harness,
EKG harness, and speed harness as shown
in Figure 4.
Next, attach the console assembly to the
left and right uprights using Phillips screws
M6x12 (Qty. 4).
CONSOLE HARNESS
Figure 4
PHILLIPS SCREW
WASHER
CONSOLE
WIRE HARNESS
UPRIGHTS
7
Assembly
Step 5:
Attach left inside handle cover and left
outside handle cover to left upright using
Phillips screw ST4.2x13 (Qty. 3) as shown in
Figure 5.
Repeat assembly step for right side handle
covers.
Figure 5
PHILLIPS SCREW
Step 6:
Tighten all Allen bolts (Qty. 8) installed
in Step 3. Note: Move the fenders up to
access the Allen bolts.
Next, attach both left and right fenders to base using Phillips screws ST4.2x13
(Qty. 2) and Phillips screws M6x12
(Qty. 2).
Move the treadmill to its final location
(see section titled “Moving Instructions”).
Adjust the leveler feet so that the treadmill
does not wobble while in use.
Figure 6
PHILLIPS SCREW
FENDER
LEVELER
FOOT
8
Assembly
Congratulations!!
You have completed the assembly of your new Health Trainer PRO Treadmill.
9
Loading...