Keys Fitness E2-0 User Manual

Owner’s Manual

CAUTION

KF-E2.0

Customer Service

(800) 340-0482 Manufactured By:

Keys Fitness Products

4009 Distribution Drive Suite 250 Garland, TX 75041

Read all precautions and instructions in this manual before using this equipment.

Model Name : KF-E2.0 Serial Number :

Serial Number can be found at the above specified location.

315-00131

09/18 Rev 9.0

www.keystness.com

TABLE OF CONTENTS

Table of Contents 2 Important Safety Information 3 Assembly 4

Parts Identifier 5 Assembly Steps 6

Console Information 18 Maintenance Instruction 25 Workout Information 27 Parts list 31 Exploded View 33 Warranty 35

THANK YOU for making this unit a part of your exercise program. Keys Fitness

Products Fitness assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time

you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Help line. We have trained service technicians on site to take care of you, our valued customer.

REGISTRATION CARD

To avoid unnecessary delays in warranty parts and to insure that a permanent record of your purchase is on file with our company, be sure to send in the warranty registration card or register on-line at www.keysfitness.com within 10 days of purchase.

8:30 am - 5:30 pm Central Time

Table of Contents

Keys Fitness series

oDEl: KF-E2.0

QUESTIoNS?

CAll

(800) 340-0482

Monday-Friday

www.keystness.com

WARNING!

of 35 and/or persons with pre-existing health problems. The manufacturer or distributor assumes no responsibility for personal injury or property

damage sustained by or through the use of this product. To reduce the risk of electrical shock, burns, re, or other possible injuries to the user, it is

important to review this manual and the following precautions before operation.

Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age

SAFETY PRECAUTIONS AND TIPS

1. It is the owner’s responsibility to ensure that all users of this unit have read the owner’s Manual and are familiar with warnings and

safety precautions.

2. This unit has a user maximum capacity of 275 pounds.

3. The unit should only be used on a level surface and is intended for indoor use only. The unit should not be placed in a garage, patio, or near water and should never be used while you are wet. Keys Fitness recommends a mat be placed under the unit to

protect oor or carpet and for easier cleaning.

4. Follow safety information in regards to plugging in your unit. Do not run the power cord underneath your unit. Do not operate the unit with a damaged or frayed power cord.

5. Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use the unit with bare feet, sandals, socks or stockings.

6. Always examine your unit before using to ensure all parts are in working order.

7. Allow the unit to fully stop before dismounting.

8. Pets should never be allowed near the unit.

9. Do not leave children unsupervised near or on the unit.

10. Never operate the unit where oxygen is being administered, or where aerosol products are being used.

11. Never insert any object or body parts into any opening.

12. For safety and to prevent damage to your unit, no more than one person should use the unit at a time.

13. Always unplug the unit before cleaning and/or servicing. Service to your unit should only be performed by an authorized service representative, unless authorized and/or instructed by the manufacturer.

14. Failure to follow these instructions will void the unit warranty. Thank you for purchasing the Keys Fitness KF-E2.0! The quality product you have chosen was designed to meet your needs for

cardiovascular exercise. Before you start, please read the owner’s Manual and become familiar with the operation of your new unit. Remember to take time to perform stretching exercises, provided in this manual, to help avoid injury. If you are taking medication, consult your physician to see what effect the medication will have on your exercise heart rate. If you have heart problems, you are not active, and/or are over the age of 35

years, do not use the pre-set programs or start an exercise program without rst contacting and receiving approval from your physician. To avoid

the risk of electrical shock, always keep the console dry. Do not spill liquids on the console. Keys Fitness recommends a sealed water bottle for beverages consumed while using the unit.

Important Safety Information

Assembly

ww w.keysfitness.com

www.keystness.com

Right Rotating Handlebar

Allen Screws M8x58

Left Rotating Handlebars

Right Handlebar

Left Handlebar

Bottle Holder

Water Bottle

Rotating Arm - Pedal assembly (Right)

Wheel Tracks

Front stabilizer

Upright post

Console

Upright tube cover

Tools

Main Frame

Allen Screws M8x70

Allen Screws M8x20

Allen Screws M10x112

Screws (Black) M5x20

Allen Screws M6x10

Allen Screws M8x15

Allen Screws M8x20

Screws M4x10

Spring Washers M8

Flat Washers M8x16x1.2

Flat Washers M10xø22x1.5

Spring Washers M10

Bushings

Flat Washers M8xø22x2.0

Flat Washers M8xø38x2.0

Nut M8

N10

N13

N14

N15

N17

N18

N20

N21

N22

Rotating Handlebar Tube - Left

Rotating Handlebar Tube - Right

Pedal Arm Cover - Left

L-L

Pedal Arm Cover - Right

L-R

6mm

5mm

13mm

14mm

Prior to assembly, remove components from the box and verify that all the listed parts were supplied.

Parts Identifier

www.keystness.com

N17

N15

Use Tool

6mm

ASSEMBLY FOR FRONT STABILIZER

Secure the front stabilizer (B) to the main frame (A) using 2 allen screws (N4), 2 spring washers (N17) and 2 flat washers (N15).

Assembly

N13

N14

Use Tool

6mm

ASSEMBLY FOR REAR WHEEL TRACKS

Secure the rear wheel tracks (C) to the main frame (A) using screws (N1), springs washers (N13), and flat washers (N14).

www.keystness.com

Note: After finishing the installation of both the front stabilizer bar and the rear wheel tracks, in order to add stability to the unit, you may need to adjust the levelers that are located on the bottom of the stabilizer bars.

Assembly

www.keystness.com

N13

N14

Use Tool

6mm

ASSEMBLY FOR UPRIGHT POST

Step 1:

Insert the upright post cover (H) onto the upright post (D) from the bottom side.

Step 2:

Connect the lower sensor wire (A2) with the upper sensor wire (D2).

Step 3:

Mount the upright post (D) to the main frame (A) and secure using 4 allen screws (N7), 4 spring washers (N13), and 4 flat washers (N14).

Step 4:

Slide the console tube cover down to conceal tube connection.

Assembly

N13

N21

N13

N14

G1-1

D2-1

Use Tool

6mm

Use Tool

5mm

ASSEMBLY FOR STATIONARY HANDLEBARS

Step 1:

Connect the pulse wire (G1-1) from the right handlebar (G1) to the pulse wire (D2-1) from the upright post (D).

Step 2:

Attach the right stationary handlebar (G1) to the right handlebar mount on the upright post (D) and secure using 3 allen screws (N6).

www.keystness.com

Step 3:

Repeat steps 1 and 2 for the left stationary handlebar (G2).

ASSEMBLY FOR RIGHT HANDLEBAR

Step 1:

Connect the right rotating handlebar tube (P1) to the upright post (D) at the arm joint and secure using allen screw (N8), spring washer (N13) and flat washer (N21).

Step 2:

Attach the right rotating handlebar (E1) to the right rotating handlebar tube (P1) and secure using 4 allen screws (N3), 4 spring washers (N13), and 4 flat washers (N14).

Assembly

www.keystness.com

N18

N13

N14

N22

Use Tool

6mm

Use Tool

13mm

14mm

ASSEMBLY FOR RIGHT ROTATING HANDLEBAR TUBE

Step 1:

Insert 2 bushings (N18) on the tapered ends into the right pedal arm joint (A) - one for each side.

Step 2:

Attach the right pedal arm (A) to the right rotating handlebar tube (P1) and secure using allen screw (N2), spring washer (N13), flat washer (N14) and nut (N22).

Assembly

N21

N13

N20

Use Tool

6mm

www.keystness.com

ASSEMBLY FOR LEFT ROTATING HANDLEBAR

Connect the left rotating arm (P2) to the upright post (D) at the arm joint and secure using allen screw (N8), spring washer (N13) and flat washer (N21).

ASSEMBLY FOR LEFT PEDAL

locate the left pedal assembly (F) and attach it to the main frame (A) at the pedal tube mount. Secure with allen screw (N8), spring washer (N13) and flat washer (N20).

Assembly

+ 25 hidden pages