2.4 GHz cordless keyboard and mouse combination product user's manual
● This Packing Contains:
1. Cordless keyboard 1 pcs.
2. Cordless mouse 1 pcs.
3. Receiver 1 pcs .
4. AA carbon battery 2 pcs. (Use in keyboard product)
5.
AAA alkaline battery 2 pcs. (Use in mouse product)
6. User's manual.
● Mouse Product Function:
1
2
3
4
5
6
8
7
1. Left/right Button.
Press Left & right buttons simultaneously and hold down 3 seconds will switch mouse resolution.
(Switch from 800 to 1600 DPI, and press again to change from 1600 to 800 DPI).
2. Low power battery indicator.
The low power battery indicator to remind you to change the batteries when the red led light is sparking.
3. Optical Sensor.
4. Power on/off.
Power on/off switch to maximize battery life .
5. Mouse ID pairing button.
Connect the mouse and receiver ..
6. Battery case.
Open battery case and follow the remark(＋,－) to put batteries correctly.
7. Receiver Led indicator.
It will be sparking while connecting mouse or date transfer.
8. Receiver ID pairing button..
Connect the receiver and mouse.
● Keyboard Product Function:
B B
A. Multimedia HOT KEY:
Previous Switch to the previous media track.
A
Play/Pause Begin playing a CD or a video file(or to restart after pause)
Stop Stop playing the media.
Next Switch to the next media track.
Mute Mute sound. Press again to resume sound.
Volume wheel Rotate this wheel to decrease and increase volume.
B. Other HOT KEY:
Home Go to the default Home Page.
E-mail Activate the e-mail system.
My favorites Bring up "My Favorite Window".
Press again to close "My Favorite Window".
Search Bring up " Search Windows "
Stop Stop current tran smission.
Sleep On computers with power management program, this Hot Key
enables you to : St art your screen saver / Log of f Windows / Shut
down Windows.
Back Go to previous page.
Forward Go to next page.
● Product operation sequence.
※ When this product finished from factory, all has completed keyboard, mouse and receiver pairing
code!
Therefore please put batteries into the keyboard battery case and the mouse battery case separately
according to the correct polarity, then insert the receiver into computer USB port, then you can use
the products..
If this product is unable to use! Please follow operation sequence to set the pairing code.
1. Insert the receiver into the USB port of computer, then press the receiver ID pairing button .Now LED of receiver start
to sparking。
2. After 20 seconds,
separately press ID pairing button of keyboard and mouse, then finish pairing
process.
● Driver installation.
1. Please uninstall oth er driver of keyboard or m ouse.
2. Insert the driver CD into the CD-ROM/DVD-ROM of your computer.
3. Follow the on-screen instructions.
4. Restart your computer.
● System Requirements
1. IBM PC or compatible systems with USB host connector。
2. Windows 2000/ME/XP/VISTA。
● Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interferen ce to radio com munications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con ditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
Loading...