KD ENTRY user manual：
Second step: KD ENTRY
insert the OBD connector
of the car to get power,
the LED light will turn on.
original car OBD
interface
First step: Download KD ENTRY APP from App Store. After that users can open Bluetooth settings
from mobile phone.
The Forth step: when you
find the device, and then
click pairing
Third step: click
the Bluetooth
settings and then
click to search
The sixth step: paired the
device. Lock means keep the
car not open via the
Bluetooth function. Unlock
means open the car via
Bluetooth function, trunk
means open the trunk via
Bluetooth function. Panic
means searching the car, it is
convenient to find where the
car is.
The Fifth step: input the
default password
“000000”
。
The seventh
step: return APP
UI, operate the
keys.
Power supply: DC 12V
FCC ID: 2AJMY- KD ENTRY
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
Loading...