Key Digital KD-HDDA1x2Pro Phantom, Phantom KD-HDDA1x3Pro, Phantom KD-HDDA1x4Pro Operating Instructions Manual
HDMI® Distribution Amplifiers with Audio De-Embedder,
Coaxial Audio, Optical Digital Audio & Analog L/R
The Experts in Digital Video Technology and Solutions
™
Phantom Series
™
Operating Instructions
KD-HDDA1x2Pro KD-HDDA1x3Pro
KD-HDDA1x4Pro
4
Always follow the instructions provided in this Operating Manual.
© 2013 Key Digital, Inc. All rights reserved.
Table of Contents
Introduction ................................................................ 1
Quick Setup Guide .......................................................... 2
Installation and Operation ..................................................... 3
DVI Applications for KD-HDDA Pro Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
EDID Control Settings ........................................................ 4
External Audio Outputs ....................................................... 5
RS-232 Commands and Protocol ............................................... 5
Mechanical / Technical Specications ............................................ 6
Important Product Warnings:................................................... 7
Safety Instructions: .......................................................... 7
How to Contact Key Digital
®
................................................... 8
Warranty Information ......................................................... 8
1
Introduction
Key Digital® Phantom Series™ HDMI/DVI Distribution Ampliers are designed and engineered
to offer the best in quality, performance, and reliability while providing a cost effective HDMI/
DVI distribution solution. The KD-HDDA1x2Pro; KD-HDDA1x3Pro; KD-HDDA1x4Pro HDMI
Distribution Ampliers provide single input to multiple output distribution and maintain
crystal-clear, pristine picture and sound quality. Phantom Series
™
Distribution Ampliers are
a transparent solution for all digital video/audio distribution applications and support all HD
and SD video standards, including 1080p/60. KD-HDDA Pro Distribution Ampliers feature
status-monitoring LEDs and are capable of separating HDMI Audio.
About the KD-HDDA1x2Pro; KD-HDDA1x3Pro; KD-HDDA1x4Pro
› Distribution of one HDMI input to multiple (2, 3, or 4) HDMI outputs
› Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) resolutions up to
1080p (60Hz & 50Hz)
» SD & HD: 480i, 480p, 720p, 1080i, 1080p
» VESA: From 640x480p up to 1920x1200p
› EDID and HDCP Transparency between source and displays
› Can be used to strip audio from the HDMI input and send it to external digital or analog audio
outputs
› Supports signal rates up to 10.2 Gb per second
› Supports HDMI and DVI-D
› Compliant with all HDMI
®
versions and HDCP copyright protection
› Input and Output status indicated by LED lights
› Firmware upgradable
› Rack mountable
Advanced HDMI® Features
› 3D – Capability to pass 3D stereoscopic signal formats
Accessories
› External power supply: 5V 2A
› HDMI Lacing Clips
› Rack Ears
› Operating Instructions
› Warranty Card
2
Quick Setup Guide
› Step 1: Find a safe and convenient location to mount or place your KD-HDDA Pro unit
› Step 2: Begin with the KD-HDDA Pro unit and all input/output devices turned off with
power cables removed
› Step 3: Connect your HDMI or DVI-D source device to the input port of your KD-HDDA Pro unit
› Step 4: Connect your HDMI or DVI-D displays to the output port of your KD-HDDA Pro unit
› Step 5: Be sure the Operation Mode Switch is set to the “Normal” position
› Step 6: Connect power to the KD-HDDA Pro unit
› Step 7: Power on input/output devices
Audio
Audio
Audio
Audio
Audio
HDMI
Audio
CAT6/STP
Audio
Audio
Audio
HDMI/DVI
*
HDMI/DVI
*
HDMI/DVI
*
HDMI/DVI
*
HDMI/DVI
*
HDMI/DVI
*
HDMI/DVI*
Audio
CAT6/STP
Audio
CAT6/STP
DVI Video*
DVI Video*
DVI Video*
DVI Video*
HDMI
CAT6/STP
CAT6/STP
Up to 600’
with Key Digital
®
KD-CAT6STP1X
KD-CATHD500FW
KD-CATHD500FW
CAT6/STP
CAT6/STP
Up to 600’
with Key Digital
®
KD-CAT6STP1X
KD-CATHD500FW
KD-CATHD500FW
KD-HDDA1x4Pro
EDID Control
RS-232
KD-HDDA1x4Pro
EDID Control
RS-232
Speakers
Speakers
Sub-Woofer
Display 4
Audio Rcvr.
Speakers
Speakers
Sub-Woofer
Cable Box
Display 4
Display 3
Display 2
Display 1
Audio Rcvr.
Display 4
Display 3
Display 2
Display 1
DVI
DVI Video*
Note: No signal conversion is done on the KD-HDDA1x2Pro; KD-HDDA1x3Pro; KD-HDDA1x4Pro.
If input signal is HDMI output signal will be HDMI. If input signal is DVI output signal will be DVI.
Loading...