Key Digital KD-X222, KD-X222PRO Operating Instructions Manual

HDBaseT/HDMI via CAT5e/6 Extenders

(Tx + Rx Set)

Power over HDBaseT/HDMI via CAT5e/6 Extenders,

(Tx + Rx Set)

KD-X222

KD-X222PO

Rev 2 – March 2017

Operating Instructions

Key Digital®, led by digital video pioneer Mike Tsinberg,

develops and manufactures high quality, cutting-edge

technology solutions for virtually all applications where

high-end video and control are important. Key Digital

is at the forefront of the video industry for Home Theater

Retailers, Custom Installers, System Integrators,

Broadcasters, Manufacturers, and Consumers.

The Experts in Digital Video Technology and Solutions

™

Key Digital® Systems :: 521 East 3rd Street :: Mount Vernon, NY 10553

Phone : 914.667.9700 Fax : 914.668.8666 Web : www.keydigital.com

4 1

About KD-X222/KD-X222PO

KD-X222/KD-X222PO HDBaseT/HDMI (Tx & Rx) Extenders are an HDCP 2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/UHD 60 (4:2:0) signals up to 150 ft. using Key Digital® KD-CAT6STP1X Super CAT6A Shielded cable, or up to 125 ft. using a single third-party CAT5e/6 cable. 1080p/60, 1920x1200, 3D signals are extended up to 250 ft. via single Key Digital® KD-CAT6STP1X Super CAT6 shielded cable, or up to 230 ft. using a single third-party CAT5e/6 cable. In addition to HDMI video and audio signals, KD-X222/X222PO carries IR or RS-232 for controlling remotely located equipment or the RS-232 port can be used to control the KD-X222/X222PO.

Key Features

➔

HDBaseT via Single CAT5e/6 UTP/STP Extension:

With fully automatic adjustment of feedback, equalization, and ampliﬁcation depending on cabling length

➔

KD-X222PO:

Features power extension from Tx to Rx with Power Over

HDBaseT, Rx unit does not require power supply

➔

Signal Extension:

» Up to

150 ft. @ 4K

24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling

» Up to

125 ft. @ 4K

24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6

UTP/STP cabling

» Up to

250 ft. @ 1080p

/ 1920x1200 using KD-CAT6STP1X cabling

» Up to

230 ft. @ 1080p

/ 1920x1200 using third-party CAT5e/6 UTP/STP

cabling

➔

HDCP 2.2:

Compliancy up to HDCP 2.2 and backward compliant

➔ HDR (High Dynamic Range):

More life-like images through a greater range of

luminance levels

➔

4K/Ultra HD Resolution:

Support for 4096x2160 or 3840x2160 24/25/30Hz at

4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit

➔

Deep Color Support:

Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit

➔ Low Proﬁle:

Super slim chassis design

➔

HDMI® and HDCP Licensing:

Fully licensed and compatible with HDCP 2.2 and

HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s

Table of Contents

About KD-X222/KD-X222PO.........................................1

Quick Setup Guide ................................................3

Installation and Operation ...........................................3

Application Examples ..............................................4

Connections .....................................................6

Extending IR or RS-232 Control.......................................8

Settings.........................................................12

LED Indicator Lights ...............................................15

RS-232 Commands ...............................................16

Speciﬁcations ....................................................19

Important Product Warnings:.........................................20

Safety Instructions: ................................................20

How to Contact Key Digital®.........................................21

Warranty Information ...............................................21

Always follow the instructions provided in this Operating Manual. Please check the Key Digital Website for the most up-to-date Manual.

2 3

➔

EDID Control:

Internal library features 15 default EDID conﬁgurations and

native EDID data from Output/Display devices connected via Rx

➔

Hot Plug Detection Control:

Enables integrator to choose if active signal

voltage is forced to connected input devices

➔

Full Buffer System™:

Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control

➔

IR Sensor:

Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight

IR from remote(s) without external IR connecting block

➔

Up/Down IR:

Two channels of IR enable control to/from devices connected

to Tx and Rx units

➔

RS-232:

Bi-Directional control to/from Tx and Rx unit on Phoenix connector

➔

Rotary Switch RS-232 Control Mode:

Provides control of Tx unit as well as

connectivity status

➔

3D:

Support for standard 3D stereoscopic signal formats

➔

Lossless compressed digital audio:

Support for Dolby® TrueHD,

Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio

™

➔

CEC Support:

For inter-device control between input and output HDMI channel

➔

I2C Communication:

EDID and HDCP authentication to Display and Source

➔

Control System Support:

Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.

KD-X222 Accessories

➔ (2) 5V 2A DC Power Supplies (Screw-In Type), (2) Mounting Brackets,

(1) IR Emitter, (1) IR Sensor

➔ KD-X222 requires power on both Tx and Rx units

KD-X222PO Accessories

➔ (1) 12V 2A DC Power Supply (Screw-In Type), (2) Mounting Brackets,

(1) IR Emitter, (1) IR Sensor

➔ KD-X222PO only requires power on the Tx unit, which extends power

to the Rx unit

Quick Setup Guide

Step 1: Find a safe and convenient location to mount or place your

KD-X222/KD-X222PO units

Step 2: Begin with the KD-X222/KD-X222PO Tx/Rx units and all

input/output devices turned off with power cables removed

Step 3: Connect your HDMI source to the input port of your

KD-X222/KD-X222PO Tx unit

Step 4: Connect your HDMI displays to the output port of your

KD-X222/KD-X222PO Rx unit

Step 5: Connect KD-X222/KD-X222PO Tx unit to

KD-X222/KD-X222PO Tx with CAT5e/6 cable

Step 6: Connect additional IR/RS-232 control connections and IR sensors

Step 7:

BEFORE

connecting power supply to power outlet,

screw-in the power supply to the KD-X222/KD-X222PO Tx units and KD-X222 Rx unit

Step 8:

AFTER all connections are made, plug-in power supplies to power outlets

Step 9: Power on input/output devices

Installation and Operation

Before permanently securing the unit for ﬁnal installation, test for proper operation of the unit and cables in your system. It is recommended that you leave enough ventilation space to provide sufﬁcient airﬂow and cooling.

You MUST use the Power Supply provided with your unit or you VOID the Key Digital

Warranty and risk damage to your unit and associated

equipment.

4 5

Application Examples

WiFi

Satellite

HDMI

CAT5e/6

IR Out

Satellite Remote

IR Sensor

IR In

WiFi Router

WiFi

HDMI

CAT5e/6

WiFi Router

RS-232

KD-X222

Master Controller

KD-MC1000

Master Controller

KD-MC1000

4K/HDCP2.2 HDMI Matrix Switcher

HDMI

KD-ProCL1

WiFi

HDMI

CAT5e/6

WiFi Router

RS-232

KD-X222

Master Controller

KD-MC1000

4K/HDCP2.2 HDMI Matrix Switcher

HDMI

KD-ProCL1

+ 8 hidden pages

Key Digital KD-X222, KD-X222PRO Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual