Key Digital KD-X200ProK, KD-X200POHK Operating Instructions Manual

PDF provided by Conference Room AV

Key Digital KD-X200POHK HDBaseT HDMI 2.0 CAT5e/6 Extender Tx & Rx Kit, 4K, HDCP2.2, PoH

Rev 0 – Nov 2015

Key Digital®, led by digital video pioneer Mike Tsinberg,

develops and manufactures high quality, cutting-edge

technology solutions for virtually all applications where

high-end video and control are important. Key Digital

is at the forefront of the video industry for Home Theater

Retailers, Custom Installers, System Integrators,

Broadcasters, Manufacturers, and Consumers.

Key Digital® Systems :: 521 East 3rd Street :: Mount Vernon, NY 10553

Phone : [phone] Fax : [phone] Web : www.keydigital.com

KD-X200ProK

HDBaseT/HDMI via Single CAT5e/6 (Tx+Rx Set) Extenders,

with EDID Control, Hot Plug Control, Full Buffer System, IR Sensor,

Up/Down IR or RS-232, support Ultra HD/4K & HDCP2.2

KD-X200POHK

Power over HDBaseT/HDMI via Single CAT5e/6 (Tx+Rx Set) Extenders,

with EDID Control, Hot Plug Control, Full Buffer System, IR Sensor,

Up/Down IR or RS-232, support Ultra HD/4K & HDCP2.2

Operating Instructions

®

The Experts in Digital Video Technology and Solutions

™

4 1

Table of Contents

About KD-X200ProK/KD-X200POHK ..................................1

Quick Setup Guide ................................................3

Installation and Operation ...........................................3

Application Examples ..............................................4

Connections .....................................................6

Extending IR or RS-232 Control.......................................8

Settings.........................................................10

LED Indicator Lights ...............................................13

RS-232 Commands ...............................................14

Specifications ....................................................15

Important Product Warnings & Safety Instructions: ........................16

How to Contact Key Digital

Warranty Information ...............................................18

®

.........................................17

About KD-X200ProK/KD-X200POHK

KD-X200ProK/KD-X200POHK HDBaseT/HDMI (Tx & Rx) Extenders are an HDCP

2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/UHD 60 (4:2:0)
signals up to 150 ft. using Key Digital® KD-CAT6STP1X Super CAT6A Shielded cable,
or up to 125 ft. using a single third-party CAT5e/6 cable. 1080p/60, 1920x1200,
3D signals are extended up to 250 ft. via single Key Digital® KD-CAT6STP1X Super
CAT6A shielded cable, or up to 230 ft. using a single third-party CAT5e/6 cable. In
addition to HDMI video and audio signals, KD-X200ProK/POHK carries IR or RS-232
for controlling remotely located equipment or the RS-232 port can be used to control
the KD-X200ProK/POHK.

Key Features

➔

HDBaseT via Single CAT5e/6 UTP/STP Extension:

adjustment of feedback, equalization, and amplification depending on
cabling length

➔

KD-X200POHK:

HDBaseT, Rx unit does not require power supply

➔

Signal Extension:

» Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
» Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6 UTP/

STP cabling

With fully automatic

Features power extension from Tx to Rx with Power Over

» Up to 250 ft. @ 1080p / 1920x1200 using KD-CAT6STP1X cabling
» Up to 230 ft. @ 1080p / 1920x1200 using third-party CAT5e/6 UTP/STP

cabling

➔

4K/Ultra HD Resolution:

Support for 4096x2160 or 3840x2160 24/25/30Hz at

4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit

➔

HDMI® and HDCP Licensing:

Fully licensed and compatible with HDCP 2.2 and

HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s

➔

EDID Control:

Internal library features 15 default EDID configurations and

native EDID data from Output/Display devices connected via Rx

➔

Please read all instructions to insure safe operation of the product.

© 2015 Key Digital, Inc. All rights reserved.

Hot Plug Detection Control:

is forced to connected input devices

Enables integrator to choose if active signal voltage

2 3

➔

Full Buffer System™:

HDCP authentication with source & display, EDID Control handshake,
and Hot Plug control

➔

IR Sensor:

IR from remote(s) without external IR connecting block

➔

Up/Down IR:

to Tx and Rx units

➔

RS-232:

Bi-Directional control to/from Tx and Rx unit on 3.5mm connector

➔

Rotary Switch RS-232 Control Mode:

connectivity status

➔

3D:

Support for standard 3D stereoscopic signal formats

➔

Deep Color Support:

➔

Lossless compressed digital audio:

Plus and DTS-HD Master Audio

➔

CEC Support:

HDMI channel

➔

I2C Communication:

➔

Control System Support:

Control4®, Crestron®, RTI®, Savant, URC®, Leviton® etc.

KD-X200ProK Accessories

➔ (2) 5V 2A DC Power Supplies (Screw-In Type), (2) Mounting Brackets,

(1) IR Emitter, (1) IR Sensor

➔ KD-X200ProK requires power on both Tx and Rx units

KD-X200POHK Accessories

➔ (1) 12V 2A DC Power Supply (Screw-In Type), (2) Mounting Brackets,

(1) IR Emitter, (1) IR Sensor

➔ KD-X200POHK only requires power on the Tx unit, which extends power

to the Rx unit

Manages TMDS re-clocking / signal re-generation,

Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight

Two channels of IR enable control to/from devices connected

Provides control of Tx unit as well as

12bit Deep Color video / 8bit color for 4K/UHD

Support for Dolby® TrueHD, Dolby® Digital

™

For inter-device control between main input and output

EDID and HDCP authentication to Display and Source

Compatible with Compass Control®, AMX®,

Quick Setup Guide

Step 1: Find a safe and convenient location to mount or place your

KD-X200ProK/KD-X200POHK units

Step 2: Begin with the KD-X200ProK/KD-X200POHK Tx/Rx units and all

input/output devices turned off with power cables removed

Step 3: Connect your HDMI source to the input port of your

KD-X200ProK/KD-X200POHK Tx unit

Step 4: Connect your HDMI displays to the output port of your

KD-X200ProK/KD-X200POHK Rx unit

Step 5: Connect KD-X200ProK/KD-X200POHK Tx unit to

KD-X200ProK/KD-X200POHK Tx with CAT5e/6 cable

Step 6: Connect additional IR/RS-232 control connections and IR sensors

BEFORE

Step 7:

Step 8:

connecting power supply to power outlet,

power supply to the KD-X200ProK/KD-X200POHK Tx units and
KD-X200ProK Rx unit

AFTER all connections are made, plug-in power supplies to
power outlets

screw-in the

Step 9: Power on input/output devices

Installation and Operation

Before permanently securing the unit for final installation, test for proper operation
of the unit and cables in your system. It is recommended that you leave enough
ventilation space to provide sufficient airflow and cooling.

You MUST use the Power Supply provided with your unit or you VOID
the Key Digital
equipment.

®

Warranty and risk damage to your unit and associated