Kettler YM 6723 User Manual

2 –7

D

8 – 13

14 – 19

20 – 25

26 – 31

32 – 37

39 – 43

44 – 49

50 – 55

56 – 61

GB

F

NL

E

I

PL

P

DK

CZ

Abb. ähnlich

Computeranleitung

„YM 6723“

GB

Computeranleitung YM 6723

Safety instructions

Please observe the following instructions for
your own safety:

• The training device must be set up on an appropriate and
firm surface.

• Inspect the connections for firm fitting before initial operation
and additionally after approximately six operation days.

• In order to prevent injuries caused by wrong stress or over­stress, the training device may only be used in accordance
with the instructions.

• It is not recommended to permanently set up the device in
humid rooms due to the resulting corrosion development.

• Assure yourself regularly that the training device functions
properly and that it is in duly condition.

• The operator is responsible for the safety controls, which
have to be carried out on a regular and proper basis.

• Defective or damaged parts must be exchanged immediately.
Only use original KETTLER spare parts.

• The device may not be used until after repairs are comple­ted.

• The safety level of the device can only be maintained provi­ded that it is regularly inspected for damage and wear and
tear.

For Your Safety:

• Before starting the training, check with your GP that
you are fit for training with this device. The doctor's
findings should form the basis for the setup of your
training programme. Incorrect or excessive training
may damage your health.

• Systems to monitor your heart rate can be imprecise.
Excessive training may result in serious damage to
your health or death. Should you feel dizzy or weak,
stop the training immediately.

8

The Training Program Computer System

Display and Keyboard

1. Display

1

The display provides you with all important information. These distinctions should be noted between
the Menu list and the Training Program list displays:

GB

3

2

Menu Display

When the display is turned on, you arrive at the Menu list.
Here you can make settings for the user- or machine data, select a Training Program, and read your

training results.

Training Display

After selecting a Training Program, you arrive at the Training Programs display.
It provides you with all important training scores and the Training Program profile.

2. Central Key - Press

In the Menu: By pressing the central key you confirm the selected item. This brings you to the sel-

ected Menu item or the selected Training Program.

In the Training: no function

3. Central Key - Turn

In the Menu: change the selection in the respective Menu. The semicircular image in the lower dis-

play area indicates additional selection options.

In the Training: change the pedaling resistance

4

5

4. Left Key

In the Menu: jump back to the main Menu. Any changes made will not be saved.
In the Training: end the Training Program and start the recovery pulse measurement. By pressing

again, you can return to the Training Program.

5. Right Key

In the Menu: calling up of the contextual information. The significance of the Menu item is explai-

ned in more detail.

In the Training: display of average scores/values. When the key is pressed, average scores/values

are displayed for a few seconds.

9