KETTLER STOCKHOLM 7122-500 User Manual

Montageanleitung Tischtennistisch

„STOCKHOLM“

Art.-Nr. 7122-500/-700, 7162-500/-700

Der Umwelt zuliebe: Wir drucken auf 100% Altpapier!

Assembly Instructions

Before assembling or using the table-tennis table, please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts.

All Kettler products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The knowledge gained in this process is used to constantly improve and develop our products. In order to offer our customers the very best in product quality, we reserve the right to make technical changes at any time. In spite of this, should you have any cause for complaint, please contact your Kettler dealer.

Note on Safety

■ The table-tennis table should be used only for its intended pur-

pose, i.e. for playing with suitable table-tennis bats and balls.

■ All other uses are prohibited and may be dangerous. The man-

ufacturer cannot be held liable for damage or injury caused by improper use of the table.

■ Damaged or worn components may endanger your safety or

shorten the lifespan of the table-tennis table. Replace worn or damaged components immediately and remove the table from use until this has been done. Use only spare parts manufactured by Kettler.

■ The table-tennis table complies with all safety regulations. In-

correct repairs, alterations to the design (removal of original parts, addition of other components etc.) may endanger the safety of the user.

■ Instruct other persons (in particular children) using the table in

its correct use, and draw their attention to any potential source of danger, especially when setting up or dismantling the table.

■ When setting up or dismantling the table, stay clear of its fold-

ing radius.

■ When folded up, the table-tennis table presents a large surface

to the wind. For this reason, ensure that it is stored in a sheltered position.

■ The table-tennis table may be pushed only into the transport po-

sition (see p. 16, Fig. 1) because there is otherwise a danger of injury.

■ The unit complies with the standard DIN 7898-1/10.97.

■ Depending on frequency of use, check all screws, bolts etc.

regularly to ensure that they are in good condition.

■ In case of enquiry, please contact your Kettler dealer.

Handling the equipment

■ Do not use the table-tennis table until it has been fully and cor-

rectly assembled and checked.

■ Ensure that table-tennis tables which are not weatherproof are

not exposed to dampness or rain. Keep them well away from direct sources of heat. Should the surface become warped, lay the table on a level surface for a few days.

■ Set the table up on a level surface.

■ Do not cover it with plastic foil, under which condensation may

form. We recommend the weatherproof Kettler tarpaulin, art. no. 7032.

■ For practising without a partner, the table halves can be fold-

ed up singly.

■ For more information on the sport of table-tennis, you are re-

ferred to the specialist literature on the subject.

■ Do not use corrosive or abrasive materials to clean the equip-

ment. Ensure that such materials are not allowed to pollute the environment. In most cases, a slightly dampened cloth is sufficient.

■ Please keep original packaging of this article, so that it may be

used for transport at a later date, if necessary

Instructions for Assembly

■ The equipment must be assembled with due care by two adult

persons.

■ Carefully read these mounting instructions before beginning

with the work itself. The individual steps are additionally explained in the sequenz of figures by means of symbols, in some cases a text mark indicates that a written explanations is avail-

able. Strictly follow the individual mounting steps to ensure a safe use and operation of the unit.

■ To ensure that the table-tennis table is properly assembled and

can be safely used, observe the instructions for assembly exactly.

List of spare parts page 18 and 19

When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back.

Example order: Art. no. 7122-500 / spare-part no. 94608005

/ 2 pieces / inspection no......

Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this

should be clearly stated on the order by adding the words „with

fastening material“.

KETTLER GB Ltd. · Kettler House, Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL KETTLER International Inc. · 1355, London Bridge Road · USA-Virginia Beach, Virginia 23450 www.kettler.net

4x M6

2x2x

6x M8x60

6x 3,9x13

2x M6x58

4x M5x65

24x

4x M6x100

6x M6

4x M6x45

4x M6x49

(7162-500/-700)

(7122-500/-700)

4x M8x125

4x M8x110

8x M8

4x M5

10x

ø25

ø16

ø12,5

ø12

5mm

3mm

Packungsinhalt

Checklist (contents of packaging)

Liste de vérification (contenu de l’emballage)

Checklijst (verpakkingsinhoud)

Sie benötigen zusätzlich folgendes Werkzeug (Gehört nicht zum Lieferumfang):

You also need the following tools (Not included):

Vous avez besoin de cet util en complément (con compris dans la livraison)

U heeft tevens volgend gereedschap nodig (Is niet in de levering ingesloten):

SW13 SW10

2x 2x 1x 1x

nur für wetterfeste Tischtennistische

for weatherproof table-tennis tables only

uniquement pour les tables de tennis de table résistantes aux intempéries

alleen voor weerbestendige tafeltennistafels

Messhilfe für Verschraubungsmaterial

Measuring help for screw connections

Gabarit pour système de serrage

Meethulp voor schroefmateriaal

M8x125

4x ø16

2x ø25

ø25

2x M8

ø25

M8x110

4x ø16

1x M8

M8x110

4x ø16

1x M8

+ 11 hidden pages