Kettler SPLASH User Manual

Assembly Instructions

„SPLASH“

Item # 08838-390

Printed on 100% recycled paper.!

Adult Assembly Required

picture similar

KETTLER®International Inc. · PO Box 2747 · Virginia Beach, VA 23450 USA

www.kettlerusa.com
[e-mail]

USA

F
E

La asamblea del adulto requirió.

Montage par une personne adulte.

This KETTLER product has been designed in accordance with the latest standards of safety and subjected to con­stant quality monitoring. The data gained from this quality process is then incorporated in the development of our
products. For this reason, we reserve the right to make changes in design and technology in order to offer our
customers products of the highest standard of quality at all times. In spite of this, should you have any ground for
complaint, please contact your KETTLER International Inc.

For your safety

■ This toy vehicle should be used for its intended purpose only, i.e. one (1) child only. It should not be used in any other
way, as this may be dangerous. The manufacturer cannot be held liable for damage or injury caused by incorrect use.

■ This product is a toy and is not suitable for use in traffic or on public roads.

■ Always keep a watchful eye on your child in order to avoid risks by thoughtless and hasty movements.

■ Please care for the fact that the tricycle is only used on safe ground.

■ The tricycle is an unlighted play implement. Its use in the dark is dangerous.

■ In case of a sudden and/or strong turn of the handlebar the tricycle could be caused to tip. Danger of injuries!

■ The tricycle must not be connected with other vehicles, sports or similar devices and not be driven/pulled by them.

Never subject your child on the tricycle to speeds exceeding walking pace!

■ We recommend that a child using the tricycle should wear a child's bicycle helmet.

■ Damaged components may endanger the safety of your child or shorten the lifespan of the product. Inspect it at regular

intervals to ensure that none of the components are damaged and that none of the bolts or other joints have worked loose.

■ Replace worn or damaged parts immediately and ensure that the product is not used again until this has been done.
If any parts require replacement, use only original spares manufactured by KETTLER.

■ This child’s wheeled toy conforms to the stipulated safety regulations European standard EN 71-1/3 („Safety regula­tions for childrens toys“). Incorrect repairs or alterations (removal of original parts or addition of other parts etc.) may
be a source of danger to the user.

Use of the T oy

■ WARNING: Adult supervision is required. Never use near steps, slopes, driveways, hills, roadways, alleys or swim-
ming pool areas. Always wear shoes. Never allow more than one rider (without a tandem seat). The use of protecti­ve gear and a Safety Helmet is highly recommended.

■ Ensure that the toy vehicle is not used until it has been properly assembled and checked by an adult person.

■ In case of tricycles without a free-wheel consider the fact that the pedals will rotate even when the tricycle is pushed.

■ Do not transport any objects on the tricycle.

■ Always adjust the use of the tricycle to the conditions encountered.

■ Tricycles do not possess a continuously effective brake system. Therefore, safeguard the tricycle against rolling away

■ Never draw the tricycle behind you as long as a child is seated on it.

■ Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger.

■ Although dangerous situations are unlikely to occur if the toy is used correctly, children at play should, if possible, be

supervised.

■ Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

■Please bear in mind that there is always a danger of children injuring themselves while using swings, climbing

frames,toy vehicles or similar equipment.

■When using the toy vehicle, the user should always wear strong shoes.

■ Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger.

■ When children are at play, situations may arise which cannot be predicted by the manufacturer and for which he can-

not be held responsible.

■ Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly.

■ Never use corrosive or abrasive substances to clean the toy. Never use substances which may cause pollution of the

environment.

Assembly Instructions

Read these instructions carefully before assembling the product or using it for the first time. They contain
important information for your safety and for the correct use and maintenance of this KETTLER product.
Keep the instructions in a safe place for information or for ordering spare parts.

2

USA

■ Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or three months.

■ Due to the nature of materials used in pneumatic tires on KETTLER toys, it is not recommended for the product to be left

in any one place for too long where solvents or other chemicals, i. e. petrol, may lie. This may result in a chemical
reaction, which could cause the tires to mark the surface such as a vinyl flooring. If in doubt put something underneath
the wheels to cover the floor

Assembly of the toy vehicle

■ The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions carefully before begin­ning work. Assemble the vehicle in the exact sequence shown by the letters in the diagrams. This is essential for the
safe function and use of the tricycle.

■Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please
be careful when assembling this machine.

■Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around.

Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suf-
focation if children play with plastic bags!

■ Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by
hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (lock-
ing device). Then check that all screw connections have been tightened firmly. Attention:once locknuts have been
unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.

■ The grips can be pushed onto the handlebars more easily if they are first soaked in warm water.

■ Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).

■ When ordering spare parts, always state the full article number, spare-part number, the quantity required and the

inspection number stamped on the back or the serial number of the product..

Example order: item # 08838-390 / spare part no. 12802003 / 1 piece / inspection no./ S/N ...
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.)

is required, this should be clearly stated on the order by adding the words „with fastening material“.

3

The manufacturer reserves the right to make changes reflecting product or other tech­nical advances. The content of these instructions is accurate at the date of printing.

3 Year Residential Warranty and a 1 Year Institutional Warranty.

The warranty begins with the date of purchase by the consumer. Please address all warranty questions to
KETTLER headquarters at the following address:

KETTLER®International Inc., P.O. Box 2747, Virginia Beach, VA 23450-2747,USA

For parts or service ONLY call 1-866-804-0440 or send e-mail to:

[e-mail]

call [phone] fax [phone].

www.kettlerusa.com

[e-mail]

Warranty