Kettler Champ 3.0 07137-600, Champ 3.0 07177-600, CHAMP 3.0, QUANTUM Assembly Instruction Manual

Der Umwelt zuliebe: Wir drucken auf 100% Altpapier!

F

D

GB

NL

E

I

PL

Abbildung ähnlich

13

10

Table Tennis Table Assembly Instructions

Champ 3.0

Model No’s: 07137-600/07177-600

Assembly Instructions

Before assembling or using the table-tennis table, please read the following instructions carefully. They contain

important information for use and maintenance of the equipment as well as for your personal safety. Keep these

instructions in a safe place for maintenance purposes or for ordering spare parts.

All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality
control during manufacturing. The knowledge gained in this process is used to constantly improve and develop our products. In order
to offer our customers the very best in product quality, we reserve the right to make technical changes at any time. In spite of this,
should you

have any cause for complaint, please contact your KETTLER dealer.

GB

Note on Safety

The table-tennis table should be used only for its intended
purpose, i.e. for playing with suitable table-tennis bats and balls.

All other uses are prohibited and may be dangerous. The
manufacturer cannot be held liable for damage or injury caused
by improper use of the table.

Damaged or worn components may endanger your safety or
shorten the lifespan of the table-tennis table. Replace worn or
damaged components immediately and remove the table from
use until this has been done. Use only spare parts manufactured
by KETTLER.

The table-tennis table complies with all safety regulations.
incorrect repairs, alterations to the design (removal of original
parts, addition of other components etc.) may endanger the
safety of the user.

Instruct other persons (in particular children) using the table in

its correct use, and draw their attention to any potential source
of danger, especially when setting up or dismantling the table.

When setting up or dismantling the table, stay clear of its
folding radius.

When folded up, the table-tennis table presents a large surface
to the wind. For this reason, ensure that it is stored in a
sheltered position.

The table-tennis table may be pushed only into the transport
position because there is otherwise a danger of injury.

The unit complies with the standard EN 14468–1:2004.

Depending on frequency of use, check all screws, bolts etc.
regularly to ensure that they are in good condition.

Caution: While assembly of the product keep off children’s
reach (Choking hazard - contains small parts).

In case of enquiry, please contact your KETTLER dealer.

Handling the equipment

Do not use the table-tennis table until it has been fully and
correctly assembled and checked.

Ensure that table-tennis tables which are not weatherproof are
not exposed to dampness or rain. Keep them well away from
direct sources of heat. Should the surface become warped, lay
the table on a level surface for a few days.

Set the table up on a level surface.

Do not cover it with plastic foil, under which condensation may
form. We recommend the weatherproof KETTLER tarpaulin, art.
no. 7032-300.

For practising without a partner, the table halves can be folded
up singly.

For more information on the sport of table-tennis, you are
referred to the specialist literature on the subject.

Do not use corrosive or abrasive materials to clean the
equipment. Ensure that such materials are not allowed to pollute the
environment. In most cases, a slightly dampened cloth is sufficient.

Waste Disposal: KETTLER products are recyclable. At the end of
its useful life please dispose of this article correctly and safely
(local refuse sites).

Assembly Instructions

GB

Instructions for Assembly

The equipment must be assembled with due care by two adult
persons.

Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the
diagrams. The correct sequence is given in capital letters.

Please note that there is always a danger of injury when
working with tools or doing manual work. Therefore please be
careful when assembling this machine.

Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Always
dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if
children play with plastic bags!

The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed.

Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device).Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.

For technical reasons, we reserve the right to carry out
preliminary assembly work (e.g. addition of tubing plugs).

Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary. Goods may only be
returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible. It is
important to provide a detailed defect description / damage report!

List of spare parts

When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the
product (see spare parts drawing).

Example order: Art. no. 07177-600 / spare-part no. 94130115

/ 2 pieces / S/N......

Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this

should be clearly stated on the order by adding the words “with
fastening material“.

KETTLER GB Ltd.· KETTLER House, Merse Road · North
Moons Moat · Redditch, Worcestershire B98 9HL

Sie benötigen zusätzlich folgendes Werkzeug (Gehört nicht zum Lieferumfang):
You also need the following tools (Not included):
Vous avez besoin de cet util en complément (con compris dans la livraison)
U heeft tevens volgend gereedschap nodig (Is niet in de levering ingesloten):
Usted necesita adicionalmente la siguiente herramienta (no pertenece al volumen de suministro):
Per eseguire il montaggio, Vi occorre il seguente attrezzo (non è incluso nel volume di fornitura):

Dodatkowo potrzebne są następujące narzędzia (nie objęte zakresem dostawy):

PL

I

E

NL

F

GB

D

11

Checkliste (Packungsinhalt)

Checklist (contents of packaging)

Liste de vérification (contenu de l’emballage)

Checklijst (verpakkingsinhoud)

Lista de control (contenido del paquete)

Lista di controllo (contenuto del pacco)

Lista kontrolna (zawartość opakowania)

GB

F

NL

E

I

PL

4

1

3

2

2

4

2

4

4

2

Ø3,9x16

12

Ø3,9x9,5

Ø5x25

4

M6x30

6

M8x60

8

4

Ø12

Ø10

16

Ø16

4

4

2

2

4

66 mm

2

4

M8

4

2

2

2

2

2

2

2

2

2

2

2

2

4

2

2

4

M8x110

4

M6x110

4

6

Ø 25

4

4

22

4

M6

4

M5

4

13

10

12

Messhilfe für Verschraubungsmaterial

Measuring help for screw connections

Gabarit pour système de serrage

Meethulp voor schroefmateriaal

Ayuda para la medición del material de atornilladura

Misura per materiale di avvitamento

Wzornik do połączeń śrubowych

GB

F

NL

E

I

PL

1