2
Assembly Instructions
n
important information for your safety and for the correct use and maintenance of this KETTLER® product.
Keeptheinstructions ina safe placeforinformation or for ordering spareparts.
This KETTLER® product has been designed in accordance with the latest standards of safety and subjected
to constant quality monitoring.The data gained from this quality processis then incorporated in thedevelopment of our products. For this reason, we reserve the right to make changes in design and technology
in order to our customers products of the highest standard of quality at all times. In spite of this,
should you have any ground for complaint, please contact your KETTLER® dealer.
For your safety
This toy vehicle should be used for its intended purpose only, that is as a pushbar for a KETTLER tricycle.
It should not be used in any other way, as this may be dangerous. The manufacturer cannot be held
liable for damage or injury caused by incorrect use.
Damaged components may endanger the safety of your child or shorten the lifespan of the product.
Inspect it at regular intervals to ensure that none of the components are damaged and that none of the
bolts or other joints have worked loose.
Replace
The product conforms to the American standard ASTM F 963. Incorrect repairs or alterations (removal of
originial parts of addition of other parts, etc.) may be a source of danger to the user.
worn or damaged parts immediately and ensure that the product is not used again until this
has been done. If any parts require replacement, use only original spares manufactured by KETTLER®.
Use
Assembly of the accessory
of the Accessory
Ensure that the accessory is not used until it has been properly assembled and checked by an adult
person.
Never use the pushbar as a lever to assist in crossing obstacles such as steps, curbs, etc.
When children are at play, situations may arise which cannot be predicted by the manufacturer and for
which he cannot be held responsible.
Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger.
Although dangerous situations are unlikely to occur if the accessory is used correctly, children at play
should, if possible, be supervised.
Please keep original packaging so that it may be used for transport at a later date, if necessary.
The accessory must be assembled carefully by an adult person. Study the assembly instructions carefully
before beginning work. Assemble the accessory in the exact sequence shown by the diagrams. This is
essential for safe function and use of the scooter.
Never use corrosive or abrasive substances to clean the accessory. Never use substances which may
cause pollution of the environment.
USA
Tighten the nuts by hand until resistance is encountered, then use a wrench to tighten them.
For technical reasons we reserve the right to carry out preliminary assembly work (i.e. addition of tubing
plugs).
When ordering spare parts, always state the full model number, spare part number, quantity required,
and serial number.
Example: Model # 8135-199 / Spare part # 8135-199#01 / 1 piece / serial #...
IMPORTANT: spare parts do not include fastening material; if fastening material (bolts, nuts, etc.) is
required this should be clearly stated on the order by adding the words “with fastening material.”
Always ensure that the pushbar ts correctly in the adaptor and locks. Do not hang any weights on the
bar! The vehicle may tip over and your child may be hurt. The pushbar is intended for adult use only, do
not pass the responsibility of children on to other children. For free play time take the pushbar o for
safety reasons.