Kettler HAPPY User Manual

Assembly Instructions

„HAPPY“

Art. Nr. 8838-190

Printed on 100% recycled paper.!

HEINZ KETTLER GmbH & Co. · Postfach 1020 · D-59463 Ense-Parsit

Assembly must be carried out by an adult!

picture similar

This KETTLER product has been designed in accordance with the latest standards of safety and subjec­ted to constant quality monitoring. The data gained from this quality process is then incorporated in
the development of our products. For this reason, we reserve the right to make changes in design and
technology in order to offer our customers products of the highest standard of quality at all times. In
spite of this, should you have any ground for complaint, please contact your KETTLER dealer.

For your safety

■ This toy vehicle should be used for its intended purpose only, i.e. one (1) child only. It should not be used
in any other way, as this may be dangerous. The manufacturer cannot be held liable for damage or inju­ry caused by incorrect use.

■ This product is a toy and is not suitable for use in traffic or on public roads.

■ Always keep a watchful eye on your child in order to avoid risks by thoughtless and hasty movements.

■ Please care for the fact that the tricycle is only used on safe ground.

■ The tricycle is an unlighted play implement. Its use in the dark is dangerous.

■ In case of a sudden and/or strong turn of the handlebar the tricycle could be caused to tip. Danger

of injuries!

■ The tricycle must not be connected with other vehicles, sports or similar devices and not be driven/pul­led by them. Never subject your child on the tricycle to speeds exceeding walking pace!

■ Damaged components may endanger the safety of your child or shorten the lifespan of the product. Inspect
it at regular intervals to ensure that none of the components are damaged and that none of the bolts or
other joints have worked loose.

■ Replace worn or damaged parts immediatlely and ensure that the product is not used again until this
has been done. If any parts require replacement, use only original spares manufactured by KETTLER.

■ The product complies fully with the appropriate safety regulations (European Standard EN 71, CE)
and has been passed for use by TÜV-GS. Incorrect repairs or alterations (removal of original parts or
addition of other parts etc.) may be a source of danger to the user.

Use of the Toy

■ Ensure that the toy vehicle is not used until it has been properly assembled and checked by an adult
person.

■ In case of tricycles without a free-wheel consider the fact that the pedals will rotate even when the tri­cycle is pushed.

■ Do not transport any objects on the tricycle.

■ Always adjust the use of the tricycle to the conditions encountered.

■ Tricycles do not possess a continuously effective brake system. Therefore, safeguard the tricycle against

rolling away when parking it. Never park the tricycle unattended with a child on it!

■ Never draw the tricycle behind you as long as a child is seated on it.

■ Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger.

■ Although dangerous situations are unlikely to occur if the toy is used correctly, children at play should,

if possible, be supervised.

■ Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or
three months.

■ Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

■ Please bear in mind that there is always a danger of children injuring themselves whilst using

swings, climbing frames,toy vehicles or similar equipment.

■ When children are at play, situations may arise which cannot be predicted by the manufacturer and
for which he cannot be held responsible.

■ Before use, always check all screws and plug-in connections as well as respective safety devices fit
correctly.

Assembly Instructions

Read these instructions carefully before assembling the product or using it for the first time. They contain
important information for your safety and for the correct use and maintenance of this KETTLER product.
Keep the instructions in a safe place for information or for ordering spare parts.

2

■ WARNING: Adult supervision is requiered. Never use near steps, slopes, driveways, hills, roadways,
alleys or swimming pool areas. Always wear shoes. Never allow more than one rider (wiithout a tan­dem seat). The use of protective gear and a Safety Helmet is highly recommended.

■ Never use corrosive or abrasive substances to clean the toy. Never use substances which may cause
pollution of the environment.

■ Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or
three months.

Assembly of the toy vehicle

■ The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions care­fully before beginning work. Assemble the vehicle in the exact sequence shown by the letters in the
diagrams. This is essential for the safe function and use of the scooter

■ Please note that there is always a danger of injur y when working with tools or doing manual work.
Therefore please be careful when assembling this machine.

■ Ensure that your working area is free of possible sources of danger, for example don’t leave any tools

lying around. Always dispose packaging material in such a way that it may not cause any danger.
There is always a risk of suffocation if children play with plastic bags!

■ Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten
the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all screw connections have been
tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.

■ The grips can be pushed onto the handlebars more easily if they are first soaked in warm water.

■ Please keep original packaging of this article, so that it may be used for transport at a later date, if

necessary.

■ For technical reasons, we reserve the right to carry out preliminar y assembly work (e.g. addition of
tubing plugs).

■ When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and
the inspection number stamped on the back.

Example order: Art. no. 08838-190 / spare-part no. 12802003 / 1 piece / inspection no. ...

Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.)

is required, this should be clearly stated on the order by adding the words „with fastening material“.

3

3 Year Residential Warranty and a 1 Year Institutional Warranty.

The warranty begins with the date of purchase by the consumer. Please address all warranty questions to
your retailer or Kettler headquarters at the following address:
KETTLER International Inc., P.O. Box 2747, Virginia Beach, VA 23450-2747,
call [phone], fax [phone].

For parts or service call [phone] or send e-mail to:

[e-mail]

KETTLER International Inc. · 1355 London Bridge Road · USA-Virginia Beach, Virginia 23456 USA

World Wide Web address: www.kettlerusa.com
Email address: [e-mail]

The manufacturer reserves the right to make changes reflecting product or other tech­nical advances. The content of these instructions is accurate at the date of printing.

Warranty