
General
Information
Applications
Electrical
Properties
Residue
Removal
Availability
Kester 282 mildly activated rosin flux core consists of high quality Grade WW rosin to
which a very small amount of an extremely effective activating agent has been
incorporated. Kester 282 is classified as Type ROL1 flux under IPC ANSI/J-STD-004
Joint Industry Standard. It was formerly classified as Type RMA per MIL-F-14256.
Kester 282 rosin-cored solder has been developed for use in the electronics industry
where a more active flux than plain rosin is required but where highly activated fluxes are
considered potentially conductive. Rosin core 282 has particular application where
difficult assemblies are to be soldered but the flux residue must be electrically inert.
Kester 282 rosin-core provides a greatly increased fluxing ability. However, the residue is
nearly as electrically inert as plain, unactivated rosin flux. The low conductivity results
from a negligible amount of ionic residue. The low ionic content in the flux is shown by
the very high water extract resistivity. The rosin residue is non-corrosive, moisture and
fungus resistant, and non-conductive.
Since the rosin residue is dry and practically inert after soldering, the surface is actually
insulated from atmospheric corrosion. Residue removal is usually not required, but, if
necessary for appearance or utility reasons, the rosin residue can be completely removed
with Kester 5240 Rosin Residue Remover or 5768 Bio-Kleen Aqueous Saponifier.
Kester 282 rosin-core is available in any solder alloy, which can be supplied with a core.
228822 MMiillddllyy AAccttiivvaatteedd RRoossiinn FFlluuxx
FFoorr CCoorreedd SSoollddeerr WWiirree
& Properties
Water Extract Resistivity 200,000 ohm-cm (typical)
Effect on Copper Mirror None
Spread Factor 88 (typical)
Chloride and Bromide Test Pass
Health
& Safety
This product, during handling or use, may be hazardous to health or the environment.
Read the Material Safety Data Sheet and warning label before using this product.