KERO Neris 2 User Manual
Instructions MANUAL
Folding kayak NERIS-2 (tandem)
1. General descrition
NERIS-2 is a touring folding kayak ideal for flat
water trips on rivers, lakes and water
reservoirs. It is also suitable for sea and ocean
kayaking along shore line
The light weight and high compatibility are
the main advantages of the NERIS folding
kayak providing paddlers ease in transporting
and use
.
The kayak assembly and disassembly time is
within 20-25 minutes. No additional tools are
required. The framing of the kayak provides
required stiffness and shape to have great
paddling experience.
.
Technical features
Loading capacity kg
Length m
Width m
Weight kg
Packaging size::
back pack mm x 00 x
long pack mm x x
Kayak capacity:
recreational trips adults child
touring expedition adults
( ) 500 9 230
( ) 1500 240 240
:2+1
:2
300
5,5
0,84
27
1
2 Bags’ Content.
1. - 7 .
Set of crossribs psc
2.
Bow and Stern Assembly
3.
Bow and Stern A-shape Keelbars
4.
Set of Stringers:
-
a dual stringer plates-4psc
b - single stringers-4psc
5. - 4 .
Set of Washboards psc
6.
Skin
7.
Back pack and Long pack
8.
Repair Kit
1
2
3
4
5
2
3. Assembly Instructions
All NERIS folding kayaks are run through
presale test assembly. However, the
first kayak assembly may seem to be
more challenging then following one.
The skin is being stretched with each
assembly and it will be easier to put the
skin on a frame.
Two people kayak assembly is
recommended. The kayak is to be
assembled on even and clean surface.
Avoid assembling the kayak on sand. It
may cause damage to joining parts and
more difficult assembly and
disassembly in future.
The main parts of the kayak are marked
with numbers and pointing arrows for
ease of assembly.
Marking points:
Bow, LeftLB –
– Stern, Left
LS
Bow, Right
–
RB
Stern, Right
–
RS
Step 1.
Attach Cross ib #1 to Bow Assembly as marked with
two arrows pointing each other. Use a wing nut and
bolt to secure the crossrib.
Repeat this step for stern assembly using Cros ib #7.
The Assembly upper and middle s are
connected by plates with keyhole slots to be secured
on sides of Cross ibs #1 and #7.
r
sr
stringer
r
3
Loading...