KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
email: info@kern-sohn.com
Phone: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Installation instructions
Tripod
KERN VB-A08/VB-A09
Version 1.0
02/2008
GB
VB-A08/VB-A09-IA-e-0810
GB
KERN VB- A08/VB-A09
Version 1.0 02/2008
Installation Instructions
Tripod
In order to raise the display unit for weighing plate size 300 x 300 x 65 mm use the tripod
VB-A08, for weighing plate size ≥ 380 x 380 x 96 mm use the VB-A09 tripod.
Scope of delivery:
VB-A08 VB-A09
2 VB-A08/VB-A09-IA-e-0810
Screw-on holder for the display unit, model VB-A09 only:
Assembly of tripod.
1. Remove weighing plate
2. Screw-off assembly plate and replace it with the tripod
3. Screw tripod on the platform
Example: VB-A08
Screw-in foot screw till it is safely fixed.
Observe that the air bubble of the level is within the prescribed circle.
VB-A08/VB-A09-IA-e-0810 3
4. Screw-off table foot of the display unit 5. Screw-off cover plate and replace it
with the cover plate of the tripod
6. Screw-on cover plate
7. Screw tripod holder on the cover
plate acc. to figure
8. Fix display unit on the tripod using the securing screw (1).
VB-A08:
VB-A09:
9. Screw-in turning knobs (2, 3) for display positioning
4 VB-A08/VB-A09-IA-e-0810
Loading...