GB
KERN RPB
Version 1.0 12/2005
Operating Manual
Price calculating balance
Contents
1 Technical data ________________________________________________________31
2 Declaration of conformity _______________________________________________33
3 Appliance overview_____________________________________________________ 33
3.1 Overview of display _____________________________________________________ 37
3.1.1 Display weight ______________________________________________________________ 38
3.1.2 Display basic price ___________________________________________________________ 38
3.1.3 Display sales price____________________________________________________________ 38
3.2 Keyboard overview _____________________________________________________ 39
4 Basic Information (General) _____________________________________________40
4.1 Proper use_____________________________________________________________ 40
4.2 Improper Use __________________________________________________________ 40
4.3 Warranty _____________________________________________________________ 40
4.4 Monitoring of Test Resources_____________________________________________ 41
5 Basic Safety Precautions ________________________________________________41
5.1 Pay attention to the instructions in the Operation Manual _____________________ 41
5.2 Personnel training ______________________________________________________ 41
6 Transport and storage __________________________________________________41
6.1 Testing upon acceptance _________________________________________________ 41
6.2 Packaging _____________________________________________________________ 41
7 Unpacking, Setup and Commissioning_____________________________________42
7.1 Installation Site, Location of Use __________________________________________ 42
7.2 Unpacking_____________________________________________________________ 42
7.2.1 Setup ______________________________________________________________________ 42
7.2.2 Scope of delivery ____________________________________________________________ 43
7.3 Mains connection _______________________________________________________ 43
7.4 Battery power supply____________________________________________________ 43
7.5 Initial Commissioning ___________________________________________________ 43
7.6 Adjustment____________________________________________________________ 44
7.7 Verification____________________________________________________________ 46
7.7.1 Jumper and seals _____________________________________________________________ 47