KERN ODC-89 Series, ODC 894, ODC 895 User Instructions
ODC-89-BA-e-1610
KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@kern-sohn.com
Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
User instructions
USB m
icroscope
KERN
ODC-89
ODC 894, ODC 895
Version 1.0
01/2016
2
ODC-89-BA-e-1610
Model
KERN
Resolution
Interface
Sensor
Frame rate
Colour /
Monochrome
Supported operating
systems
ODC 894
2 MP
USB 2.0
1/3,2“ CMOS
15 - 30 fps
Colour
Win, XP, Vista, 7, 8, 10
ODC 895
2 MP
USB 2.0
1/3,2“ CMOS
15 - 30 fps
Colour
Win, XP, Vista, 7, 8, 10
Model
KERN
Magnification
levels
Focusing stand
Illumination
ODC 894
10x, 200x
Coaxial
8x LED
ODC 895
10x, 200x
Focus wheel
8x LED
GB
KERN ODC-89
Version 1.0 01/2016
User instructions
USB microscope
Before use
You should ensure that the device is not exposed to direct sunlight, temperatures which
are too high or too low, vibrations, dust or a high level of humidity.
The ideal temperature range is between 0 and 40°C and a relative humidity of 85%
should not be exceeded.
Always make sure that you use an approved power cable. Thus possible damages by
reason of the development of overheating (fire hazard) or an electric shock can be
prevented.
Do not open the housing and touch the internal component. There is the risk of damaging
them and affecting the functionality of the camera.
In order to carry out cleanings always disconnect the power cable from the mains supply.
Always keep the sensor clear from dust and do not touch it. Therefore do not remove its
protective housing. Otherwise there is the risk of affecting the microscopic image. In case
of non-use always attach the protective covers.
Technical data
Loading...