KERN ODC-87, ODC-88, ODC 872, ODC 874, ODC 881 User Instructions

ODC-87_88-BA-e-1610

KERN & Sohn GmbH

Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]

Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

User instructions
Microscope camera

(eye piece camera)

KERN

ODC-87, ODC-88

ODC 872, ODC 874
ODC 881

Version 1.0
01/2016

2

ODC-87_88-BA-e-1610

KERN ODC-87, ODC-88

Version 1.0 01/2016

User instructions
Microscope camera

Before use

You should ensure that the device is not exposed to direct sunlight, temperatures which
are too high or too low, vibrations, dust or a high level of humidity.
The ideal temperature range is between 0 and 40°C and a relative humidity of 85%
should not be exceeded.

Always make sure that you use an approved power cable. Thus possible damages by
reason of the development of overheating (fire hazard) or an electric shock can be
prevented.

Do not open the housing and touch the internal component. There is the risk of
damaging them and affecting the functionality of the camera.

In order to carry out cleanings always disconnect the power cable from the camera.
Always keep the sensor clear from dust and do not touch it. Otherwise there is the risk

of affecting the microscopic image. In case of non-use always attach the protective
covers.

Technical data

Model
KERN

Resolution

Interface

Sensor

Frame rate

Colour /
Monochrome

Supported operating
systems

ODC 872

1,3 MP

USB 2.0

1/3“ CMOS

7,5 – 12,5 fps

Colour

Win, XP, Vista, 7, 8, 10

ODC 874

3,1 MP

USB 2.0

1/2,7“ CMOS

3 – 7,5 fps

Colour

Win, XP, Vista, 7, 8, 10

ODC 881

5,1 MP

USB 3.0

1/2,5“ CMOS

15 -30 fps

Colour

Win, XP, Vista, 7, 8, 10

GB